IPAC2018 - List of Authors (Zhang, J.R.)

Paper	Title	Page
MOPMF084	The Progress of CEPC Positron Source Design	319
	C. Meng, X.P. Li, G. Pei, J.R. Zhang IHEP, Beijing, People's Republic of China
	Circular Electron-Positron Collider (CEPC) is a 100 km ring e⁺ e⁻ collider for a Higgs factory. The injector is composed of 10 GeV linac and 120 GeV booster. The linac of CEPC is a normal conducting S-band linac with frequency in 2856.75 MHz and provide electron and positron beam at an energy up to 10 GeV and repetition frequency in 100 Hz. The positron source of CEPC is composed of target, flux concentrator, pre-accelerating section and beam separation system. The detailed design of each section of positron source will be presented and discussed, meanwhile the start-to-end dynamic simulation results will be presented also in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF084
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMF058	Conceptual Design of HEPS Injector	1394
	J.L. Li, H. Dong, Z. Duan, Y.Y. Guo, D.Y. He, Y. Jiao, W. Kang, C. Meng, S. Pei, Y.M. Peng, J.R. Zhang, P. Zhang, Z.S. Zhou IHEP, Beijing, People's Republic of China
	Abstract The High Energy Photon Source (HEPS) will be constructed in the following few years. The light source is comprised of an ultra-low emittance storage ring and a full energy injector. The energy of the storage ring is 6 GeV. The injector is comprised of a 500 MeV linac, a 500 MeV to 6 GeV booster synchrotron and transport lines connecting the machines. In the present design, the linac uses normal conducting S-band bunching and accelerating structures. The booster adopts FODO cells, has a circumference of about 454 m and an emittance lower than 40 nmrad. The injector can provide a single-bunch charge up to 2 nC at 6 GeV for the storage ring. This paper briefly introduces the conceptual design of the injector of the HEPS.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF058
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMF061	Physical Design of the 500 MeV Electron Linac for the High Energy Photon Source	1404
	S. Pei, D.Y. He, X. He, J.L. Li, J. Liu, X. Ma, C. Meng, X. Wang, O. Xiao, J.R. Zhang, Z.S. Zhou IHEP, Beijing, People's Republic of China S. Shu Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People's Republic of China
	Funding: Work supported by the HEPS project and the National Natural Science Foundation of China (11475201). peisl@ihep.ac.cn The High Energy Photon Source (HEPS) is a 6 GeV light source with ultra-low emittance, it is proposed to be built at Huairou district, northeast suburb of Beijing, China. A 500 MeV electron linac will be used to generate the electron beam for injection into the booster. Here the preliminary physical design of the electron linac is presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF061
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMF031	Development of a High-Power High-Directivity Directional Coupler and Four Power Dividers for S-Band	2422
	X. He, J. Lei, J.R. Zhang IHEP, Beijing, People's Republic of China
	A novel Bethe-hole S band directional coupler has been designed based on some structural optimizations, the prototype has been tested with a Directivity of more than 30 dB. The new directional coupler can also hold higher power compared to the old type, which is more useful for the future accelerator applications. Four power dividers using different structures are studied and the best one is chosen for fabrication. The prototype with matching rod in the middle has got qualified microwave cold test results and has been used during the whole microwave commissioning of an accelerating structure, the performance is quite stable.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMF031
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF011	Design of 4 Ampere S-Band LINAC Using Slotted Iris Structure for HOM Damping	2965
	J. Pang, S. Chen, X. He, L.W. Zhang CAEP/IFP, Mainyang, Sichuan, People's Republic of China S. Pei, H. Shi, J.R. Zhang IHEP, Beijing, People's Republic of China
	Funding: Key Laboratory of Pulsed Power, CAEP (Contract NO. PPLF2014PZ05) Key Laboratory of Particle Acceleration Physics &Technology，IHEP, CAS (Contract Y5294109TD) An S-band LINAC with the operating frequency of 2856 MHz and beam current of 4 A was designed for flash X-ray radiography for hydrodynamic test. The optimization of the parameters of the LINAC was processed to obtain the minimum beam radius and the maximum energy efficiency. For the purpose of reducing the beam orbits offset at the exit of LINAC, a slotted iris accelerating structure would be employed to suppress the transverse Higher Order Modes (HOMs) by cutting four radial slots in the iris to couple the HOMs to SiC loads. In this paper, we present the design of the LINAC and the results of beam dynamic analysis.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF011
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The Progress of CEPC Positron Source Design

319

C. Meng, X.P. Li, G. Pei, J.R. Zhang
IHEP, Beijing, People's Republic of China

Circular Electron-Positron Collider (CEPC) is a 100 km ring e⁺ e⁻ collider for a Higgs factory. The injector is composed of 10 GeV linac and 120 GeV booster. The linac of CEPC is a normal conducting S-band linac with frequency in 2856.75 MHz and provide electron and positron beam at an energy up to 10 GeV and repetition frequency in 100 Hz. The positron source of CEPC is composed of target, flux concentrator, pre-accelerating section and beam separation system. The detailed design of each section of positron source will be presented and discussed, meanwhile the start-to-end dynamic simulation results will be presented also in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF084

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMF058

Conceptual Design of HEPS Injector

1394

J.L. Li, H. Dong, Z. Duan, Y.Y. Guo, D.Y. He, Y. Jiao, W. Kang, C. Meng, S. Pei, Y.M. Peng, J.R. Zhang, P. Zhang, Z.S. Zhou
IHEP, Beijing, People's Republic of China

Abstract The High Energy Photon Source (HEPS) will be constructed in the following few years. The light source is comprised of an ultra-low emittance storage ring and a full energy injector. The energy of the storage ring is 6 GeV. The injector is comprised of a 500 MeV linac, a 500 MeV to 6 GeV booster synchrotron and transport lines connecting the machines. In the present design, the linac uses normal conducting S-band bunching and accelerating structures. The booster adopts FODO cells, has a circumference of about 454 m and an emittance lower than 40 nmrad. The injector can provide a single-bunch charge up to 2 nC at 6 GeV for the storage ring. This paper briefly introduces the conceptual design of the injector of the HEPS.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF058

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMF061

Physical Design of the 500 MeV Electron Linac for the High Energy Photon Source

1404

S. Pei, D.Y. He, X. He, J.L. Li, J. Liu, X. Ma, C. Meng, X. Wang, O. Xiao, J.R. Zhang, Z.S. Zhou
IHEP, Beijing, People's Republic of China
S. Shu
Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People's Republic of China

Funding: Work supported by the HEPS project and the National Natural Science Foundation of China (11475201). peisl@ihep.ac.cn
The High Energy Photon Source (HEPS) is a 6 GeV light source with ultra-low emittance, it is proposed to be built at Huairou district, northeast suburb of Beijing, China. A 500 MeV electron linac will be used to generate the electron beam for injection into the booster. Here the preliminary physical design of the electron linac is presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF061

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMF031

Development of a High-Power High-Directivity Directional Coupler and Four Power Dividers for S-Band

2422

X. He, J. Lei, J.R. Zhang
IHEP, Beijing, People's Republic of China

A novel Bethe-hole S band directional coupler has been designed based on some structural optimizations, the prototype has been tested with a Directivity of more than 30 dB. The new directional coupler can also hold higher power compared to the old type, which is more useful for the future accelerator applications. Four power dividers using different structures are studied and the best one is chosen for fabrication. The prototype with matching rod in the middle has got qualified microwave cold test results and has been used during the whole microwave commissioning of an accelerating structure, the performance is quite stable.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMF031

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF011

Design of 4 Ampere S-Band LINAC Using Slotted Iris Structure for HOM Damping

2965

J. Pang, S. Chen, X. He, L.W. Zhang
CAEP/IFP, Mainyang, Sichuan, People's Republic of China
S. Pei, H. Shi, J.R. Zhang
IHEP, Beijing, People's Republic of China

Funding: Key Laboratory of Pulsed Power, CAEP (Contract NO. PPLF2014PZ05) Key Laboratory of Particle Acceleration Physics &Technology，IHEP, CAS (Contract Y5294109TD)
An S-band LINAC with the operating frequency of 2856 MHz and beam current of 4 A was designed for flash X-ray radiography for hydrodynamic test. The optimization of the parameters of the LINAC was processed to obtain the minimum beam radius and the maximum energy efficiency. For the purpose of reducing the beam orbits offset at the exit of LINAC, a slotted iris accelerating structure would be employed to suppress the transverse Higher Order Modes (HOMs) by cutting four radial slots in the iris to couple the HOMs to SiC loads. In this paper, we present the design of the LINAC and the results of beam dynamic analysis.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF011

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)