IPAC2018 - List of Authors (Wang, L.)

Paper	Title	Page
TUPMF053	Longitudinal Impedance Measurement of the Strip-Line Kicker for High Energy Photon Source (HEPS)	1379
	S.K. Tian, J. Chen, Y. Jiao, H. Shi, L. Wang, N. Wang IHEP, Beijing, People's Republic of China
	The High Energy Photon Source (HEPS) is a 6-GeV, kilometer-scale storage ring light source to be built in China. One of the main design challenges of the storage ring is to minimize collective instabilities associated with the impedance of small-aperture vacuum components. In this paper we present beam coupling impedance measurements obtained by the well known coaxial wire method, for the HEPS Strip-Line kicker. The frequency dependent real and imaginary parts of the distributed impedance are obtained from the measured S-parameters.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF053
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPML069	Fast Kicker and Pulser R&D for the HEPS on-Axis Injection System	2846
	H. Shi, J. Chen, Z. Duan, L. Huo, P. Liu, X.L. Shi, G. Wang, L. Wang, N. Wang IHEP, Beijing, People's Republic of China
	The HEPS plans to adopt on-axis injection scheme because the dynamic aperture of machine is not large enough for off-axis injection for its baseline 7BA lattice design. A sets of super fast kicker and pulser of ±15kV amplitude, 15ns pulse bottom width are needed for bunch spacing of 10ns to minimize perturbation on adjacent bunches. To achieve these requirement, a multifaceted R&D program including the strip-line kicker and HV pulser, was initiated last 2 years. So far, the prototype development of a 750mm long strip-line kicker and a DSRD pulser was completed and the preliminary test results show they can meet the baseline requirement of the HEPS.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPML069
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Longitudinal Impedance Measurement of the Strip-Line Kicker for High Energy Photon Source (HEPS)

1379

S.K. Tian, J. Chen, Y. Jiao, H. Shi, L. Wang, N. Wang
IHEP, Beijing, People's Republic of China

The High Energy Photon Source (HEPS) is a 6-GeV, kilometer-scale storage ring light source to be built in China. One of the main design challenges of the storage ring is to minimize collective instabilities associated with the impedance of small-aperture vacuum components. In this paper we present beam coupling impedance measurements obtained by the well known coaxial wire method, for the HEPS Strip-Line kicker. The frequency dependent real and imaginary parts of the distributed impedance are obtained from the measured S-parameters.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF053

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPML069

Fast Kicker and Pulser R&D for the HEPS on-Axis Injection System

2846

H. Shi, J. Chen, Z. Duan, L. Huo, P. Liu, X.L. Shi, G. Wang, L. Wang, N. Wang
IHEP, Beijing, People's Republic of China

The HEPS plans to adopt on-axis injection scheme because the dynamic aperture of machine is not large enough for off-axis injection for its baseline 7BA lattice design. A sets of super fast kicker and pulser of ±15kV amplitude, 15ns pulse bottom width are needed for bunch spacing of 10ns to minimize perturbation on adjacent bunches. To achieve these requirement, a multifaceted R&D program including the strip-line kicker and HV pulser, was initiated last 2 years. So far, the prototype development of a 750mm long strip-line kicker and a DSRD pulser was completed and the preliminary test results show they can meet the baseline requirement of the HEPS.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPML069

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)