IPAC2018 - List of Authors (Storey, D.W.)

Paper	Title	Page
THPMK095	Design of an RF Modulated Thermionic Electron Source at TRIUMF	4524
	K. Fong, D.W. Storey TRIUMF, Vancouver, Canada
	The electron source in the TRIUMF ARIEL project is a gridded dispenser cathode. The cathode is biased at -300kV, and the grid requires a RF control signal of up to 150V at 650 MHz. The required RF power is approximately 20 W and is provided by an RF amplifier located outside the gun vessel. This RF power is coupled into the gun circuit through a ceramic transmission line. The design of this ceramic transmission line, as well as the impedance transformation circuit which provides both the impedance matching and the dc powers to the gun assembly are described.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK095
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPML132	Cryogenic Performance of an SRF Deflecting Cavity Fabricated Using Alternative Techniques for the ARIEL eLinac	4992
	D.W. Storey Victoria University, Victoria, B.C., Canada R.E. Laxdal, Z.Y. Yao TRIUMF, Vancouver, Canada
	A 650 MHz SRF deflecting mode cavity has been built and tested for use as a three-way beam separator in the ARIEL eLinac. The cavity operates in a TE-like mode, and has been optimized for high shunt impedance with minimal longitudinal footprint. The device is the first SRF cavity to be fully fabricated in house at TRIUMF. The requirements of the cavity allowed for the development of low cost manufacturing techniques, including the use of Reactor grade niobium and atmospheric pressure TIG welding. The cavity has been fabricated and tested at 4 K and 2 K, obtaining a 4 K Qo of 4·10⁸ at the operating voltage of 0.3 MV, surpassing the goal voltage and quality factor required for operation. Results of the cryogenic tests of the cavity will be presented here.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPML132
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design of an RF Modulated Thermionic Electron Source at TRIUMF

4524

K. Fong, D.W. Storey
TRIUMF, Vancouver, Canada

The electron source in the TRIUMF ARIEL project is a gridded dispenser cathode. The cathode is biased at -300kV, and the grid requires a RF control signal of up to 150V at 650 MHz. The required RF power is approximately 20 W and is provided by an RF amplifier located outside the gun vessel. This RF power is coupled into the gun circuit through a ceramic transmission line. The design of this ceramic transmission line, as well as the impedance transformation circuit which provides both the impedance matching and the dc powers to the gun assembly are described.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK095

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPML132

Cryogenic Performance of an SRF Deflecting Cavity Fabricated Using Alternative Techniques for the ARIEL eLinac

4992

D.W. Storey
Victoria University, Victoria, B.C., Canada
R.E. Laxdal, Z.Y. Yao
TRIUMF, Vancouver, Canada

A 650 MHz SRF deflecting mode cavity has been built and tested for use as a three-way beam separator in the ARIEL eLinac. The cavity operates in a TE-like mode, and has been optimized for high shunt impedance with minimal longitudinal footprint. The device is the first SRF cavity to be fully fabricated in house at TRIUMF. The requirements of the cavity allowed for the development of low cost manufacturing techniques, including the use of Reactor grade niobium and atmospheric pressure TIG welding. The cavity has been fabricated and tested at 4 K and 2 K, obtaining a 4 K Qo of 4·10⁸ at the operating voltage of 0.3 MV, surpassing the goal voltage and quality factor required for operation. Results of the cryogenic tests of the cavity will be presented here.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPML132

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)