Author: Shi, H.
Paper Title Page
TUPMF053 Longitudinal Impedance Measurement of the Strip-Line Kicker for High Energy Photon Source (HEPS) 1379
 
  • S.K. Tian, J. Chen, Y. Jiao, H. Shi, L. Wang, N. Wang
    IHEP, Beijing, People's Republic of China
  
  The High Energy Photon Source (HEPS) is a 6-GeV, kilometer-scale storage ring light source to be built in China. One of the main design challenges of the storage ring is to minimize collective instabilities associated with the impedance of small-aperture vacuum components. In this paper we present beam coupling impedance measurements obtained by the well known coaxial wire method, for the HEPS Strip-Line kicker. The frequency dependent real and imaginary parts of the distributed impedance are obtained from the measured S-parameters.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF053  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPML069 Fast Kicker and Pulser R&D for the HEPS on-Axis Injection System 2846
 
  • H. Shi, J. Chen, Z. Duan, L. Huo, P. Liu, X.L. Shi, G. Wang, L. Wang, N. Wang
    IHEP, Beijing, People's Republic of China
  
  The HEPS plans to adopt on-axis injection scheme because the dynamic aperture of machine is not large enough for off-axis injection for its baseline 7BA lattice design. A sets of super fast kicker and pulser of ±15kV amplitude, 15ns pulse bottom width are needed for bunch spacing of 10ns to minimize perturbation on adjacent bunches. To achieve these requirement, a multifaceted R&D program including the strip-line kicker and HV pulser, was initiated last 2 years. So far, the prototype development of a 750mm long strip-line kicker and a DSRD pulser was completed and the preliminary test results show they can meet the baseline requirement of the HEPS.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPML069  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAF011 Design of 4 Ampere S-Band LINAC Using Slotted Iris Structure for HOM Damping 2965
 
  • J. Pang, S. Chen, X. He, L.W. Zhang
    CAEP/IFP, Mainyang, Sichuan, People's Republic of China
  • S. Pei, H. Shi, J.R. Zhang
    IHEP, Beijing, People's Republic of China
  
  Funding: Key Laboratory of Pulsed Power, CAEP (Contract NO. PPLF2014PZ05) Key Laboratory of Particle Acceleration Physics &Technology，IHEP, CAS (Contract Y5294109TD)
An S-band LINAC with the operating frequency of 2856 MHz and beam current of 4 A was designed for flash X-ray radiography for hydrodynamic test. The optimization of the parameters of the LINAC was processed to obtain the minimum beam radius and the maximum energy efficiency. For the purpose of reducing the beam orbits offset at the exit of LINAC, a slotted iris accelerating structure would be employed to suppress the transverse Higher Order Modes (HOMs) by cutting four radial slots in the iris to couple the HOMs to SiC loads. In this paper, we present the design of the LINAC and the results of beam dynamic analysis. 		 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF011  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAK015 Impedance and Heat Load Analysis of the Stripline Kicker in HEPS 3234
 
  • N. Wang, J. Chen, Z. Duan, H. Shi, S.K. Tian, L. Wang, H.S. Xu
    IHEP, Beijing, People's Republic of China
  
  In the High Energy Photon Source (HEPS), strip-line kickers are adopted for beam injection and extraction. Beam coupling impedance contribution from the strip-line kicker is calculated. Detailed studies on the heat load dissipation have been performed. The peak electric field on the blade and the induced voltage on the feedthroughs due to the beam passage are also calculated.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK015  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)