IPAC2018 - List of Authors (Pozdeyev, G.)

Paper	Title	Page
MOZGBF1	FRIB Front End Construction and Commissioning	58
	G. Pozdeyev FRIB, East Lansing, Michigan, USA
	The Facility for Rare Isotope Beams (FRIB) is based upon the CW, SC driver linac to accelerate all the stable isotopes up to more than 200 MeV/u with a beam power of 400 kW. The front end (FE) commissioning shall start in 2017. This invited talk presents the FRIB front end design, and current status of FRIB front end commissioning, including beam properties and energy, and their relationship to FRIB operational requirements.
	Slides MOZGBF1 [2.965 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOZGBF1
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAL039	Commissioning of the FRIB RFQ	1090
	H.T. Ren, J.F. Brandon, N.K. Bultman, M.G. Konrad, H. Maniar, D.G. Morris, P. Morrison, G. Pozdeyev, X. Rao, R. Walker, S. Zhao FRIB, East Lansing, USA
	Funding: This work is supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661 #wei@frib.msu.edu The radio-frequency quadrupole (RFQ) at the Facility for Rare Isotope Beams (FRIB) is a 4-vane type cavity designed to accelerate heavy ion beams with charge states Q/A between 1/7 and 1/3 from 12 keV/u to 0.5 MeV/u. The RFQ was assembled in the FRIB tunnel in November 2016. Bead-pull measurements and tuning were performed with low RF power. The RFQ has been conditioned to 59 kW in August 2017, which is sufficient to accelerate the Key Performance Parameter (KPP) beams, Argon and Krypton. The RFQ has been successful-ly commissioned with KPP beams in CW regime in Octo-ber 2017. 40Ar⁹⁺ and 86Kr¹⁷⁺ beams were accelerated by the FRIB RFQ in the CW regime to the designed energy of 0.5 MeV/u. With the multi-harmonic buncher operation-al, the FRIB RFQ commissioning has been completed with bunched beam in February 2018. The beam trans-mission efficiency through the RFQ was in good agree-ment with PARMTEQ simulation results. The detailed results from the FRIB RFQ tuning, high power condition-ing and beam commissioning will be presented in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL039
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAL040	Ion Beam Studies in the FRIB Front End	1094
	T. Yoshimoto, K. Fukushima, S.M. Lidia, T. Maruta, P.N. Ostroumov, G. Pozdeyev, H.T. Ren FRIB, East Lansing, USA
	Funding: Work supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661 and the National Science Foundation under Cooperative Agreement PHY-1102511. The commissioning of the FRIB Front End with 12 keV/u argon beam started in the spring of 2017. Beam profile monitors were used to evaluate RMS Twiss parameters in various locations along the beam line. Beam dynamics in the LEBT was simulated using full 3D model of beam optics elements in the tracking codes. We found a good consistency between measured and simulated data. A beam image viewer was used to measure the beam density distribution in the real space. A hollow beam structure was observed in the Ar⁹⁺ beam with the current of ~20 eμA. Extensive beam dynamics study with 3D tracking code suggests that the hollow density distribution can be generated by space charge effects of the multi-component, multi-charge state ion beam just after the ECR ion source. This paper reports studies of a mechanism that can produce a hollow beam structure. E. Pozdeyev, invited talk at this conference
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL040
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEXGBF3	RF System for FRIB Accelerator	1765
	D.G. Morris, J. Brandon, N.K. Bultman, K.D. Davidson, A. Facco, P.E. Gibson, L. Hodges, M.G. Konrad, T.L. Larter, H. Maniar, P. Morrison, P.N. Ostroumov, J.T. Popielarski, G. Pozdeyev, H.T. Ren, T. Russo, K. Schrock, R. Walker, J. Wei, T. Xu, Y. Xu, S. Zhao FRIB, East Lansing, USA A. Facco INFN/LNL, Legnaro (PD), Italy
	The RF system of the FRIB driver accelerator includes solid state amplifiers up to 18 kW operating at frequencies from 80.5 MHz to 322 MHz. Much higher power is required for the normal conducting RFQ, ~100 kW, and it is based on vacuum tubes. This invited talk presents the performance of solid state amplifiers and LLRF in off-line testing and on-line testing of the RFQ amplifier.
	Slides WEXGBF3 [14.107 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEXGBF3
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THYGBF4	Accelerator Physics Advances in FRIB (Facility for Rare Isotope Beams)	2950
	P.N. Ostroumov, N.K. Bultman, M. Ikegami, S.M. Lidia, S.M. Lund, G. Machicoane, T. Maruta, A.S. Plastun, G. Pozdeyev, X. Rao, J. Wei, T. Xu, T. Yoshimoto, Q. Zhao FRIB, East Lansing, USA C.Y. Wong NSCL, East Lansing, Michigan, USA
	Funding: Work supported by the U.S. DOE Office of Science under Cooperative Agreement DE-SC0000661 and the NSF under Cooperative Agreement PHY-1102511, the State of Michigan and Michigan State University. This paper presents recent developments of accelerator physics related topics for the Facility for Rare Isotope Beams (FRIB) being built at Michigan State University. While extensive beam dynamics simulations including all known errors do not show uncontrolled beam losses in the linac, ion beam contaminants extracted from the ECR ion source together with main ion beam can produce significant losses after the charge stripper. These studies resulted in development of beam collimation system at relatively low energy of 16 MeV/u and room temperature bunchers instead of originally planned superconducting ones. Commissioning of the Front End enabled detailed beam physics studies accompanied with the simulations using several beam dynamics codes. Settings of beam optics devices from the ECR to MEBT has been developed and applied to meet important project milestones. Similar work is planned for the beam commissioning of the first 3 cryomodules in the superconducting linac.
	Slides THYGBF4 [11.092 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THYGBF4
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

FRIB Front End Construction and Commissioning

58

G. Pozdeyev
FRIB, East Lansing, Michigan, USA

The Facility for Rare Isotope Beams (FRIB) is based upon the CW, SC driver linac to accelerate all the stable isotopes up to more than 200 MeV/u with a beam power of 400 kW. The front end (FE) commissioning shall start in 2017. This invited talk presents the FRIB front end design, and current status of FRIB front end commissioning, including beam properties and energy, and their relationship to FRIB operational requirements.

Slides MOZGBF1 [2.965 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOZGBF1

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAL039

Commissioning of the FRIB RFQ

1090

H.T. Ren, J.F. Brandon, N.K. Bultman, M.G. Konrad, H. Maniar, D.G. Morris, P. Morrison, G. Pozdeyev, X. Rao, R. Walker, S. Zhao
FRIB, East Lansing, USA

Funding: This work is supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661 #wei@frib.msu.edu
The radio-frequency quadrupole (RFQ) at the Facility for Rare Isotope Beams (FRIB) is a 4-vane type cavity designed to accelerate heavy ion beams with charge states Q/A between 1/7 and 1/3 from 12 keV/u to 0.5 MeV/u. The RFQ was assembled in the FRIB tunnel in November 2016. Bead-pull measurements and tuning were performed with low RF power. The RFQ has been conditioned to 59 kW in August 2017, which is sufficient to accelerate the Key Performance Parameter (KPP) beams, Argon and Krypton. The RFQ has been successful-ly commissioned with KPP beams in CW regime in Octo-ber 2017. 40Ar⁹⁺ and 86Kr¹⁷⁺ beams were accelerated by the FRIB RFQ in the CW regime to the designed energy of 0.5 MeV/u. With the multi-harmonic buncher operation-al, the FRIB RFQ commissioning has been completed with bunched beam in February 2018. The beam trans-mission efficiency through the RFQ was in good agree-ment with PARMTEQ simulation results. The detailed results from the FRIB RFQ tuning, high power condition-ing and beam commissioning will be presented in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL039

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAL040

Ion Beam Studies in the FRIB Front End

1094

T. Yoshimoto, K. Fukushima, S.M. Lidia, T. Maruta, P.N. Ostroumov, G. Pozdeyev, H.T. Ren
FRIB, East Lansing, USA

Funding: Work supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661 and the National Science Foundation under Cooperative Agreement PHY-1102511.
The commissioning of the FRIB Front End with 12 keV/u argon beam started in the spring of 2017*. Beam profile monitors were used to evaluate RMS Twiss parameters in various locations along the beam line. Beam dynamics in the LEBT was simulated using full 3D model of beam optics elements in the tracking codes. We found a good consistency between measured and simulated data. A beam image viewer was used to measure the beam density distribution in the real space. A hollow beam structure was observed in the Ar⁹⁺ beam with the current of ~20 eμA. Extensive beam dynamics study with 3D tracking code suggests that the hollow density distribution can be generated by space charge effects of the multi-component, multi-charge state ion beam just after the ECR ion source. This paper reports studies of a mechanism that can produce a hollow beam structure.
*E. Pozdeyev, invited talk at this conference

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL040

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEXGBF3

RF System for FRIB Accelerator

1765

D.G. Morris, J. Brandon, N.K. Bultman, K.D. Davidson, A. Facco, P.E. Gibson, L. Hodges, M.G. Konrad, T.L. Larter, H. Maniar, P. Morrison, P.N. Ostroumov, J.T. Popielarski, G. Pozdeyev, H.T. Ren, T. Russo, K. Schrock, R. Walker, J. Wei, T. Xu, Y. Xu, S. Zhao
FRIB, East Lansing, USA
A. Facco
INFN/LNL, Legnaro (PD), Italy

The RF system of the FRIB driver accelerator includes solid state amplifiers up to 18 kW operating at frequencies from 80.5 MHz to 322 MHz. Much higher power is required for the normal conducting RFQ, ~100 kW, and it is based on vacuum tubes. This invited talk presents the performance of solid state amplifiers and LLRF in off-line testing and on-line testing of the RFQ amplifier.

Slides WEXGBF3 [14.107 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEXGBF3

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THYGBF4

Accelerator Physics Advances in FRIB (Facility for Rare Isotope Beams)

2950

P.N. Ostroumov, N.K. Bultman, M. Ikegami, S.M. Lidia, S.M. Lund, G. Machicoane, T. Maruta, A.S. Plastun, G. Pozdeyev, X. Rao, J. Wei, T. Xu, T. Yoshimoto, Q. Zhao
FRIB, East Lansing, USA
C.Y. Wong
NSCL, East Lansing, Michigan, USA

Funding: Work supported by the U.S. DOE Office of Science under Cooperative Agreement DE-SC0000661 and the NSF under Cooperative Agreement PHY-1102511, the State of Michigan and Michigan State University.
This paper presents recent developments of accelerator physics related topics for the Facility for Rare Isotope Beams (FRIB) being built at Michigan State University. While extensive beam dynamics simulations including all known errors do not show uncontrolled beam losses in the linac, ion beam contaminants extracted from the ECR ion source together with main ion beam can produce significant losses after the charge stripper. These studies resulted in development of beam collimation system at relatively low energy of 16 MeV/u and room temperature bunchers instead of originally planned superconducting ones. Commissioning of the Front End enabled detailed beam physics studies accompanied with the simulations using several beam dynamics codes. Settings of beam optics devices from the ECR to MEBT has been developed and applied to meet important project milestones. Similar work is planned for the beam commissioning of the first 3 cryomodules in the superconducting linac.

Slides THYGBF4 [11.092 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THYGBF4

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)