IPAC2018 - List of Authors (Ogur, S.)

Paper	Title	Page
MOPMF001	Bunch Schedules for the FCC-ee Pre-injector	79
	S. Ogur, K. Oide, Y. Papaphilippou, F. Zimmermann CERN, Geneva, Switzerland D.N. Shatilov BINP SB RAS, Novosibirsk, Russia
	The latest design of the Future Circular electron-positron Collider (FCC-ee) foresees a luminosity per interaction point above 2.0·10³⁶/cm²/s for operation at the Z pole. The filling from zero current occurs in collision to profit from the bunch lengthening due to beamstrahlung (so-called bootstrapping). At any time when new e^- and e⁺ buckets or bunchlets are injected into the collider, they will collide instantly. For this reason, we may provide the charge in each injected bunch in a way to pre-compensate for anticipated beam loss, and to reach the target luminosity as soon as possible after the first injection. In this way, we optimise the injection schedules for Z-mode so as to reach the peak luminosity in less than 20 minutes by interleaved injection of the two species at some portion of full bucket charge. Filling from zero the injector should allow accumulating 1.7·10¹¹ particles in one collider bucket within at least 10 injections, assuming a total transmission above 80%. In steady-state operation, the injector chain continually produces and accelerates lower bunch charges so as to maintain nearly constant bunch currents and constant peak luminosity.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF001
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF034	Layout and Performance of the FCC-ee Pre-Injector Chain	169
	S. Ogur, T.K. Charles, K. Oide, Y. Papaphilippou, L. Rinolfi, F. Zimmermann CERN, Geneva, Switzerland A.M. Barnyakov, A.E. Levichev, P.V. Martyshkin, D.A. Nikiforov BINP SB RAS, Novosibirsk, Russia I. Chaikovska, R. Chehab LAL, Orsay, France K. Furukawa, N. Iida, T. Kamitani, F. Miyahara KEK, Ibaraki, Japan E.V. Ozcan Bogazici University, Bebek / Istanbul, Turkey S.M. Polozov MEPhI, Moscow, Russia
	The Future Circular e⁺e⁻ Collider pre-injector chain consists of a 6 GeV S-Band linac, a damping ring at 1.54 GeV and pre-booster ring to reach 20 GeV for injection to the main booster. The electron and positron beams use the same accelerator chain alternatively. The e⁺ beam is generated from a novel low level RF-gun providing 6.5 nC charge at 11 MeV with 0.5 micron geometric emittance. The e⁺ beam is produced by the impact of a 4.46 GeV e^- beam onto a hybrid target, accelerated in the linac up to 1.54 GeV, and injected to the damping ring for emittance cooling. Simulations on the performance of the DR are presented for reaching the required equilibrium emittances at the required damping time. As an alternative option, a 20 GeV linac is considered utilising C-Band cavities and simulations studies have been undertaken regarding the beam transport and transmission efficiency up to that energy.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF034
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Bunch Schedules for the FCC-ee Pre-injector

79

S. Ogur, K. Oide, Y. Papaphilippou, F. Zimmermann
CERN, Geneva, Switzerland
D.N. Shatilov
BINP SB RAS, Novosibirsk, Russia

The latest design of the Future Circular electron-positron Collider (FCC-ee) foresees a luminosity per interaction point above 2.0·10³⁶/cm²/s for operation at the Z pole. The filling from zero current occurs in collision to profit from the bunch lengthening due to beamstrahlung (so-called bootstrapping). At any time when new e^- and e⁺ buckets or bunchlets are injected into the collider, they will collide instantly. For this reason, we may provide the charge in each injected bunch in a way to pre-compensate for anticipated beam loss, and to reach the target luminosity as soon as possible after the first injection. In this way, we optimise the injection schedules for Z-mode so as to reach the peak luminosity in less than 20 minutes by interleaved injection of the two species at some portion of full bucket charge. Filling from zero the injector should allow accumulating 1.7·10¹¹ particles in one collider bucket within at least 10 injections, assuming a total transmission above 80%. In steady-state operation, the injector chain continually produces and accelerates lower bunch charges so as to maintain nearly constant bunch currents and constant peak luminosity.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF001

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF034

Layout and Performance of the FCC-ee Pre-Injector Chain

169

S. Ogur, T.K. Charles, K. Oide, Y. Papaphilippou, L. Rinolfi, F. Zimmermann
CERN, Geneva, Switzerland
A.M. Barnyakov, A.E. Levichev, P.V. Martyshkin, D.A. Nikiforov
BINP SB RAS, Novosibirsk, Russia
I. Chaikovska, R. Chehab
LAL, Orsay, France
K. Furukawa, N. Iida, T. Kamitani, F. Miyahara
KEK, Ibaraki, Japan
E.V. Ozcan
Bogazici University, Bebek / Istanbul, Turkey
S.M. Polozov
MEPhI, Moscow, Russia

The Future Circular e⁺e⁻ Collider pre-injector chain consists of a 6 GeV S-Band linac, a damping ring at 1.54 GeV and pre-booster ring to reach 20 GeV for injection to the main booster. The electron and positron beams use the same accelerator chain alternatively. The e⁺ beam is generated from a novel low level RF-gun providing 6.5 nC charge at 11 MeV with 0.5 micron geometric emittance. The e⁺ beam is produced by the impact of a 4.46 GeV e^- beam onto a hybrid target, accelerated in the linac up to 1.54 GeV, and injected to the damping ring for emittance cooling. Simulations on the performance of the DR are presented for reaching the required equilibrium emittances at the required damping time. As an alternative option, a 20 GeV linac is considered utilising C-Band cavities and simulations studies have been undertaken regarding the beam transport and transmission efficiency up to that energy.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF034

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)