IPAC2018 - List of Authors (Michelato, P.)

Paper	Title	Page
TUPAF015	Preliminary Test Results of the First ESS Elliptical Cryomodule Demonstrator	691
	F. Peauger, C. Arcambal, S. Berry, P. Bosland, E. Cenni, G. Devanz, T. Hamelin, O. Piquet, B. Renard, P. Sahuquet, T. Trublet CEA/DRF/IRFU, Gif-sur-Yvette, France C. Darve ESS, Lund, Sweden P. Michelato INFN/LASA, Segrate (MI), Italy G. Olivier IPN, Orsay, France J.P. Thermeau Laboratoire APC, Paris, France
	Two ESS elliptical cavities cryomodule prototypes are being developed and will be tested at CEA Saclay before starting the series production. This paper presents the preliminary test results of the first medium beta cavities cryomodule demonstrator M-ECCTD. The measurements of the cryogenic performances at 80 K and 2 K of the different cryomodule components and circuits are given. The first RF test results performed at low power are also reported.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF015
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMK007	INFN-LASA Design and Prototyping Activity for PIP-II	2640
	A. Bignami, M. Bertucci, A. Bosotti, J.F. Chen, P. Michelato, L. Monaco, R. Paparella, D. Sertore INFN/LASA, Segrate (MI), Italy C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy S. Pirani ESS, Lund, Sweden
	The design of the PIP-II medium-β, 5-cell, 650 MHz SRF elliptical cavity and the first steps of its prototyping activity are here presented. A design based on a three dies fabrication model has been chosen and fully characterized in terms of electromagnetic and mechanical parameters. Goal of the optimization has been to realize a highly performant cavity for CW operation with reasonably good performances when pulsed. A prototyping phase started with the production of three single-cell cavities used to validate the LASA model and to develop an optimal recipe for RF surface treatment according to the state-of-the-art of the high-Q frontier.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMK007
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMK008	In-Depth Analysis of the Vertical Test Results of the Third-Harmonic Cavities for the E-XFEL Injector	2644
	M. Bertucci, A. Bignami, A. Bosotti, J.F. Chen, C.G. Maiano, P. Michelato, L. Monaco, R. Paparella, P. Pierini, D. Sertore INFN/LASA, Segrate (MI), Italy C.G. Maiano, P. Pierini ESS, Lund, Sweden C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy
	The results of the vertical tests performed at LASA on the 3.9 GHz third-harmonic cavities for the E-XFEL injector are here discussed. Analysis of experimental data allows to confirm that such high frequency cavity, prepared with standard BCP treatment and 800°C annealing treatment, suffers an intrinsic performance limitation at around 22 MV/m (@ 2 K) due to a global thermal dissipation mechanism. A quantitative interpretation of the high field Q slope is also presented according to the latest theoretical models of field-dependent surface resistance.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMK008
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF056	Optimisation Study of the Fabry-Pérot Optical Cavity for the MARIX/BRIXS Compton X-Ray Source	4192
	I. Drebot, A. Bacci, F. Broggi, S. Cialdi, C. Curatolo, D. Giannotti, D. Giove, A.R. Rossi, L. Serafini, M. Statera, V. Torri Istituto Nazionale di Fisica Nucleare, Milano, Italy A. Bosotti, P. Michelato, L. Monaco, R. Paparella, D. Sertore INFN/LASA, Segrate (MI), Italy R. Calandrino, A. Delvecchio HSP, Milan, Italy P. Cardarelli, M. Gambaccini, G. Paternò, A. Taibi INFN-Ferrara, Ferrara, Italy A. Esposito, L. Faillace, A. Gallo, C. Vaccarezza INFN/LNF, Frascati (Roma), Italy G. Galzerano, E. Puppin, A. Tagliaferri Politecnico/Milano, Milano, Italy G. Mettivier, P. Russo UniNa, Napoli, Italy V. Petrillo, F. Prelz, M. Rossetti Conti Universita' degli Studi di Milano & INFN, Milano, Italy M. Placidi, G. Turchetti Bologna University, Bologna, Italy A. Sarno INFN-Napoli, Napoli, Italy
	We present the study of the optimization of the optical cavity parameters, in order to maximise the flux of scattered photons in the Compton scattering process. In the optimisation, we compensate the losses of the photon number due to the elliptical shape of the laser pulse in optical cavity with a high focusing electron beam.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF056
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF058	The MariX source (Multidisciplinary Advanced Research Infrastructure with X-rays)	4199
	V. Petrillo, N. Piovella Universita' degli Studi di Milano, Milano, Italy A. Bacci, F. Castelli, S. Cialdi, C. Curatolo, I. Drebot, D. Giannotti, D. Giove, C. Meroni, A.R. Rossi, L. Serafini, M. Statera, V. Torri Istituto Nazionale di Fisica Nucleare, Milano, Italy A. Bosotti, F. Broggi, F. Groppi, P. Michelato, L. Monaco, R. Paparella, D. Sertore INFN/LASA, Segrate (MI), Italy R. Calandrino, A. Delvecchio HSP, Milan, Italy F. Camera, S. Coelli, G. Onida, B. Paroli, L. Perini, F. Prelz, M. Rossetti Conti, F. Tomasi Universita' degli Studi di Milano & INFN, Milano, Italy P. Cardarelli, M. Gambaccini, G. Paternò, A. Taibi INFN-Ferrara, Ferrara, Italy A. Castoldi, G. Ghiringhelli, C. Guazzoni, M. Moretti, E. Pinotti Polytechnic of Milan, Milano, Italy S. Di Mitri Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy A. Esposito, A. Gallo, C. Vaccarezza INFN/LNF, Frascati (Roma), Italy L. Faillace RadiaBeam, Santa Monica, California, USA G. Galzerano, E. Puppin, A. Tagliaferri Politecnico/Milano, Milano, Italy G. Mettivier, P. Russo UniNa, Napoli, Italy M. Placidi LBNL, Berkeley, California, USA G. Rossi Università degli Studi di Milano, Milano, Italy R.I. Saban CERN, Geneva, Switzerland A. Sarno INFN-Napoli, Napoli, Italy F. Stellato INFN - Roma Tor Vergata, Roma, Italy G. Turchetti Bologna University, Bologna, Italy
	MariX (Multidisciplinary advanced research infra-structure with X-rays) is a joint project of INFN and University of Milan, aiming at developing a twin X-ray Source of advanced characteristics for the future Sci-entific Campus of the University of Milan. Presently in its design study phase, it will be built in the post Expo area located in north-west Milan district. The first component of the X-source MariX is BriXS (Bright and compact X-ray Source), a Compton X-ray source based on superconducting cavities technology for the electron beam with energy recirculation and on a laser system in Fabry-Pérot cavity at a repetition rate of 100 MHz, producing 20-180 keV radiation for medical applications. The BriXS accelerator is also serving as injector of a 3.8 GeV superconductive linac, driving a X-ray FEL at 1 MHz, for providing coherent, moderate flux radiation at 0.3-10 KeV at 1 MHz. Scientific case, layout and typical parameters of MariX will be discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF058
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF088	R&D Activity on Alkali-Antimonied Photocathodes at INFN-Lasa	4284
	D. Sertore, P. Michelato, L. Monaco INFN/LASA, Segrate (MI), Italy C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy
	Based on the long-term experience on R&D and production of cesium telluride photocathodes for the high brightness photo-injectors and the past experience on green photocathodes developed in ‘90s , we have started a new R&D activity aiming to reach a reproducible and robust recipe for green photocathodes usable in RF gun. In this paper we present and discuss the first results so far obtained on K2CsSb photoemissive films deposited on polished Mo plugs and the plan for future studies.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF088
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Preliminary Test Results of the First ESS Elliptical Cryomodule Demonstrator

691

F. Peauger, C. Arcambal, S. Berry, P. Bosland, E. Cenni, G. Devanz, T. Hamelin, O. Piquet, B. Renard, P. Sahuquet, T. Trublet
CEA/DRF/IRFU, Gif-sur-Yvette, France
C. Darve
ESS, Lund, Sweden
P. Michelato
INFN/LASA, Segrate (MI), Italy
G. Olivier
IPN, Orsay, France
J.P. Thermeau
Laboratoire APC, Paris, France

Two ESS elliptical cavities cryomodule prototypes are being developed and will be tested at CEA Saclay before starting the series production. This paper presents the preliminary test results of the first medium beta cavities cryomodule demonstrator M-ECCTD. The measurements of the cryogenic performances at 80 K and 2 K of the different cryomodule components and circuits are given. The first RF test results performed at low power are also reported.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF015

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMK007

INFN-LASA Design and Prototyping Activity for PIP-II

2640

A. Bignami, M. Bertucci, A. Bosotti, J.F. Chen, P. Michelato, L. Monaco, R. Paparella, D. Sertore
INFN/LASA, Segrate (MI), Italy
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy
S. Pirani
ESS, Lund, Sweden

The design of the PIP-II medium-β, 5-cell, 650 MHz SRF elliptical cavity and the first steps of its prototyping activity are here presented. A design based on a three dies fabrication model has been chosen and fully characterized in terms of electromagnetic and mechanical parameters. Goal of the optimization has been to realize a highly performant cavity for CW operation with reasonably good performances when pulsed. A prototyping phase started with the production of three single-cell cavities used to validate the LASA model and to develop an optimal recipe for RF surface treatment according to the state-of-the-art of the high-Q frontier.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMK007

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMK008

In-Depth Analysis of the Vertical Test Results of the Third-Harmonic Cavities for the E-XFEL Injector

2644

M. Bertucci, A. Bignami, A. Bosotti, J.F. Chen, C.G. Maiano, P. Michelato, L. Monaco, R. Paparella, P. Pierini, D. Sertore
INFN/LASA, Segrate (MI), Italy
C.G. Maiano, P. Pierini
ESS, Lund, Sweden
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy

The results of the vertical tests performed at LASA on the 3.9 GHz third-harmonic cavities for the E-XFEL injector are here discussed. Analysis of experimental data allows to confirm that such high frequency cavity, prepared with standard BCP treatment and 800°C annealing treatment, suffers an intrinsic performance limitation at around 22 MV/m (@ 2 K) due to a global thermal dissipation mechanism. A quantitative interpretation of the high field Q slope is also presented according to the latest theoretical models of field-dependent surface resistance.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMK008

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF056

Optimisation Study of the Fabry-Pérot Optical Cavity for the MARIX/BRIXS Compton X-Ray Source

4192

I. Drebot, A. Bacci, F. Broggi, S. Cialdi, C. Curatolo, D. Giannotti, D. Giove, A.R. Rossi, L. Serafini, M. Statera, V. Torri
Istituto Nazionale di Fisica Nucleare, Milano, Italy
A. Bosotti, P. Michelato, L. Monaco, R. Paparella, D. Sertore
INFN/LASA, Segrate (MI), Italy
R. Calandrino, A. Delvecchio
HSP, Milan, Italy
P. Cardarelli, M. Gambaccini, G. Paternò, A. Taibi
INFN-Ferrara, Ferrara, Italy
A. Esposito, L. Faillace, A. Gallo, C. Vaccarezza
INFN/LNF, Frascati (Roma), Italy
G. Galzerano, E. Puppin, A. Tagliaferri
Politecnico/Milano, Milano, Italy
G. Mettivier, P. Russo
UniNa, Napoli, Italy
V. Petrillo, F. Prelz, M. Rossetti Conti
Universita' degli Studi di Milano & INFN, Milano, Italy
M. Placidi, G. Turchetti
Bologna University, Bologna, Italy
A. Sarno
INFN-Napoli, Napoli, Italy

We present the study of the optimization of the optical cavity parameters, in order to maximise the flux of scattered photons in the Compton scattering process. In the optimisation, we compensate the losses of the photon number due to the elliptical shape of the laser pulse in optical cavity with a high focusing electron beam.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF056

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF058

The MariX source (Multidisciplinary Advanced Research Infrastructure with X-rays)

4199

V. Petrillo, N. Piovella
Universita' degli Studi di Milano, Milano, Italy
A. Bacci, F. Castelli, S. Cialdi, C. Curatolo, I. Drebot, D. Giannotti, D. Giove, C. Meroni, A.R. Rossi, L. Serafini, M. Statera, V. Torri
Istituto Nazionale di Fisica Nucleare, Milano, Italy
A. Bosotti, F. Broggi, F. Groppi, P. Michelato, L. Monaco, R. Paparella, D. Sertore
INFN/LASA, Segrate (MI), Italy
R. Calandrino, A. Delvecchio
HSP, Milan, Italy
F. Camera, S. Coelli, G. Onida, B. Paroli, L. Perini, F. Prelz, M. Rossetti Conti, F. Tomasi
Universita' degli Studi di Milano & INFN, Milano, Italy
P. Cardarelli, M. Gambaccini, G. Paternò, A. Taibi
INFN-Ferrara, Ferrara, Italy
A. Castoldi, G. Ghiringhelli, C. Guazzoni, M. Moretti, E. Pinotti
Polytechnic of Milan, Milano, Italy
S. Di Mitri
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
A. Esposito, A. Gallo, C. Vaccarezza
INFN/LNF, Frascati (Roma), Italy
L. Faillace
RadiaBeam, Santa Monica, California, USA
G. Galzerano, E. Puppin, A. Tagliaferri
Politecnico/Milano, Milano, Italy
G. Mettivier, P. Russo
UniNa, Napoli, Italy
M. Placidi
LBNL, Berkeley, California, USA
G. Rossi
Università degli Studi di Milano, Milano, Italy
R.I. Saban
CERN, Geneva, Switzerland
A. Sarno
INFN-Napoli, Napoli, Italy
F. Stellato
INFN - Roma Tor Vergata, Roma, Italy
G. Turchetti
Bologna University, Bologna, Italy

MariX (Multidisciplinary advanced research infra-structure with X-rays) is a joint project of INFN and University of Milan, aiming at developing a twin X-ray Source of advanced characteristics for the future Sci-entific Campus of the University of Milan. Presently in its design study phase, it will be built in the post Expo area located in north-west Milan district. The first component of the X-source MariX is BriXS (Bright and compact X-ray Source), a Compton X-ray source based on superconducting cavities technology for the electron beam with energy recirculation and on a laser system in Fabry-Pérot cavity at a repetition rate of 100 MHz, producing 20-180 keV radiation for medical applications. The BriXS accelerator is also serving as injector of a 3.8 GeV superconductive linac, driving a X-ray FEL at 1 MHz, for providing coherent, moderate flux radiation at 0.3-10 KeV at 1 MHz. Scientific case, layout and typical parameters of MariX will be discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF058

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF088

R&D Activity on Alkali-Antimonied Photocathodes at INFN-Lasa

4284

D. Sertore, P. Michelato, L. Monaco
INFN/LASA, Segrate (MI), Italy
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy

Based on the long-term experience on R&D and production of cesium telluride photocathodes for the high brightness photo-injectors and the past experience on green photocathodes developed in ‘90s , we have started a new R&D activity aiming to reach a reproducible and robust recipe for green photocathodes usable in RF gun. In this paper we present and discuss the first results so far obtained on K2CsSb photoemissive films deposited on polished Mo plugs and the plan for future studies.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF088

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)