Author: Li, Y.T.
Paper Title Page
WEPAL054 Digital Low Level Radio Frequency System for the Booster Ring of the Taiwan Photon Source 2298
 
  • Z.K. Liu, F.Y. Chang, L.-H. Chang, M.H. Chang, S.W. Chang, L.J. Chen, F.-T. Chung, Y.T. Li, M.-C. Lin, C.H. Lo, Ch. Wang, M.-S. Yeh, T.-C. Yu
    NSRRC, Hsinchu, Taiwan
 
  The purpose of a Low-Level Radio Frequency (LLRF) system is to control the accelerating cavity field amplitude and phase. For the Taiwan Photon Source (TPS) at NSRRC, the currently operating LLRF systems are based on analog technology. To have better RF field stability, precise con-trol and high noise reduction, a digital LLRF control sys-tems based on Field Programmable Gate Arrays (FPGA) was developed. We replaced the analog LLRF system with the digital version for the TPS booster ring at the beginning of 2018, and we will replace those in the storage rings in the future. Test results and operational performance of the TPS booster DLLRF system are reported here.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL054  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAL049 Power Supply Decoupling Design 3751
 
  • Y.T. Li, F.Y. Chang
    NSRRC, Hsinchu, Taiwan
 
  After an actual operation of the phase-shifted magnet's power supply was conducted, it was found that the currents in the two modules of magnets would be coupled each other. In order to solve this mutual coupling current, a decoupling controller is designed. From the experiment results indicate that it does not only solve the issue of coupling current but also shorten the rising time of the power supply current. This helps to increase the power supply bandwidth.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL049  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMK012 Reduction of Dynamic Multipole Content in Insertion Devices Using Flat Wires 4313
 
  • T.Y. Chung, S.D. Chen, M.-S. Chiu, S.J. Huang, C.-S. Hwang, J.C. Jan, C.Y. Kuo, Y.T. Li, C.Y. Wu
    NSRRC, Hsinchu, Taiwan
  • C.-S. Hwang
    NCTU, Hsinchu, Taiwan
 
  Multipole errors of an insertion device are generally corrected based on measurements and analysis of the magnetic field integrals. Multipole components in a strong and narrow non-uniform field of an insertion device appear as dynamic multipoles. Flat wires were installed and commissioned to determine if the dynamic multipoles can be eliminated in an APPLE-II type undulator. In this work, we will discuss and compare the reduction of the dynamic multipole content and it's beam dynamics effects with the flat wire through an analysis of field calculations and beam-based measurements in the storage ring.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK012  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)