| Paper | Title | Page |
|---|---|---|
| TUPMF068 | Beam Dynamics on a Coupling Resonance at PETRA III | 1417 |
|
||
| Working on a coupling resonance is a usual way of producing round beams in a synchrotron. The beam dynamics in this regime is however more complicated, and the emittance is sensitive to the working point, coupling correction, and bunch current drop with time, which complicates the operation. We present experience with optics setup for working on a coupling resonance in PETRA III, including linear and nonlinear beam optics characteristics, and the measurement of the horizontal and vertical beam emittances with a 2D interferometer. Beam dynamics on a coupling resonance for PETRA IV, the MBA upgrade of PETRA III currently under consideration, is also presented. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF068 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| TUPMF072 | Microwave Instability and Energy Spread Measurement via Vertical Dispersion Bump in PETRA III | 1427 |
|
||
|
The recent measurement of bunch length versus current indicated that the longitudinal impedance (Z/n) is 0.15 Ω in close agreement with the impedance model*. Naive application of Keil-Schnell criteria predicts the threshold of microwave instability at 0.25 mA. Since the single bunch intensity is in the range of 0.2-2.5 mA depending on the fill-pattern of PETRA III, we expect to observe the fill-pattern dependent energy spread according to the theory. However, the 3rd generation light sources comparable to PETRA III often reported the observation which was much greater than the theoretical one. In order to induce the beam size variation we had used skew quadrupoles to generate the dispersion in vertical plane. In particular we made dispersion bump at the undulator sector so that we were able to use the X-ray optics for the precise determination of small vertical beam size. In this paper we report the experimental setup and measurement data with the estimate on the instability threshold. We also report the vertical emittance and energy spread based on the X-ray beam size measurement as well as the RF signal which was excited by the beam at the longitudinal feedback cavity.
* K. Balewski, R. Wanzenberg, "OBSERVATION OF INTENSITY DEPENDENT SINGLE BUNCH EFFECTS AT THE SYNCHROTRON LIGHT SOURCE PETRA III", Proc. of IPAC2011, p. 730. |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF072 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| TUPMF083 | Influence of Intrabeam Scattering on the Emittance of PETRA III | 1463 |
|
||
| PETRA~III is a 6 GeV hard X-ray synchrotron radiation source at DESY in Hamburg (Germany) and is in user operation since~2010. The natural emittance of PETRA III is extremely low with 1.3 nm*rad and the coupling is typically less than 1%. PETRA III is operated with a beam current of 100 mA using two different filling modes: a continuous mode with 960 bunches and a timing mode with 40 bunches. It has been observed that the horizontal emittance depends on the filling pattern and is in timing mode slightly larger compared to the emittance in the continuous mode. Despite the high energy of 6 GeV intrabeam scattering contributes for a slight emittance growth due to the small natural emittance and coupling of the machine. The increase of the emittance as a function of the single bunch current has been measured by using different filling patterns at a fixed beam current of 100 mA. The measurements of the emittance and the lifetime as a function of the single bunch current will be compared with theoretical expectations of the emittance growth due to intrabeam scattering and the Touschek lifetime. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF083 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| TUPMF084 | Optimization of the Injection Kicker Bump Leakage at PETRA III | 1467 |
|
||
| PETRA III is a third generation synchrotron light source at DESY delivering high brightness photon beams for users at 21 beam lines. It is operated at 6 GeV with a beam current of 100 mA in top-up mode and is in operation for users since 2010. An off-axis injection scheme is used to accumulate beam from the booster synchrotron DESY II in PETRA III. Three fast injection kicker magnets generate a closed orbit bump for one turn to move the stored beam near to the injection septum magnet. Ideally the orbit bump generated by the 10 μs long half-sine pulses of the kickers should be closed. Due to differences in pulse shape as well as timing and amplitude errors of the pulses there is some leakage of the injection bump which disturbs the closed orbit and affects the beam quality during top-up operation. Turn-by-turn data from the beam position monitor (BPM) system of PETRA III have been used to measure the bump leakage for different bucket positions in the filling pattern. The procedure to reduce the injection kicker bump leakage and the achieved improvement will be discussed. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF084 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| TUPMF086 | Status of the ARES RF Gun at SINBAD: From its Characterization and Installation towards Commissioning | 1474 |
|
||
| The SINBAD facility (Short and INnovative Bunches and Accelerators at DESY) is foreseen to host multiple experiments relating to the production of ultra-short electron bunches and novel high gradient acceleration techniques. The SINBAD-ARES linac will be a conventional S-band linear RF accelerator allowing the production of low charge (0.5 pC - tens pC) ultra-short electron bunches (FWHM length =< 1 fs - few fs) with 100 MeV energy. The installation of the linac will proceed in stages. In this paper we report on the status of the characterization of the ARES RF gun and the installations of the related infrastructure. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF086 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |