IPAC2018 - List of Authors (Konrad, M.G.)

Paper	Title	Page
TUPAL039	Commissioning of the FRIB RFQ	1090
	H.T. Ren, J.F. Brandon, N.K. Bultman, M.G. Konrad, H. Maniar, D.G. Morris, P. Morrison, G. Pozdeyev, X. Rao, R. Walker, S. Zhao FRIB, East Lansing, USA
	Funding: This work is supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661 #wei@frib.msu.edu The radio-frequency quadrupole (RFQ) at the Facility for Rare Isotope Beams (FRIB) is a 4-vane type cavity designed to accelerate heavy ion beams with charge states Q/A between 1/7 and 1/3 from 12 keV/u to 0.5 MeV/u. The RFQ was assembled in the FRIB tunnel in November 2016. Bead-pull measurements and tuning were performed with low RF power. The RFQ has been conditioned to 59 kW in August 2017, which is sufficient to accelerate the Key Performance Parameter (KPP) beams, Argon and Krypton. The RFQ has been successful-ly commissioned with KPP beams in CW regime in Octo-ber 2017. 40Ar⁹⁺ and 86Kr¹⁷⁺ beams were accelerated by the FRIB RFQ in the CW regime to the designed energy of 0.5 MeV/u. With the multi-harmonic buncher operation-al, the FRIB RFQ commissioning has been completed with bunched beam in February 2018. The beam trans-mission efficiency through the RFQ was in good agree-ment with PARMTEQ simulation results. The detailed results from the FRIB RFQ tuning, high power condition-ing and beam commissioning will be presented in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL039
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEXGBF3	RF System for FRIB Accelerator	1765
	D.G. Morris, J. Brandon, N.K. Bultman, K.D. Davidson, A. Facco, P.E. Gibson, L. Hodges, M.G. Konrad, T.L. Larter, H. Maniar, P. Morrison, P.N. Ostroumov, J.T. Popielarski, G. Pozdeyev, H.T. Ren, T. Russo, K. Schrock, R. Walker, J. Wei, T. Xu, Y. Xu, S. Zhao FRIB, East Lansing, USA A. Facco INFN/LNL, Legnaro (PD), Italy
	The RF system of the FRIB driver accelerator includes solid state amplifiers up to 18 kW operating at frequencies from 80.5 MHz to 322 MHz. Much higher power is required for the normal conducting RFQ, ~100 kW, and it is based on vacuum tubes. This invited talk presents the performance of solid state amplifiers and LLRF in off-line testing and on-line testing of the RFQ amplifier.
	Slides WEXGBF3 [14.107 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEXGBF3
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Commissioning of the FRIB RFQ

1090

H.T. Ren, J.F. Brandon, N.K. Bultman, M.G. Konrad, H. Maniar, D.G. Morris, P. Morrison, G. Pozdeyev, X. Rao, R. Walker, S. Zhao
FRIB, East Lansing, USA

Funding: This work is supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661 #wei@frib.msu.edu
The radio-frequency quadrupole (RFQ) at the Facility for Rare Isotope Beams (FRIB) is a 4-vane type cavity designed to accelerate heavy ion beams with charge states Q/A between 1/7 and 1/3 from 12 keV/u to 0.5 MeV/u. The RFQ was assembled in the FRIB tunnel in November 2016. Bead-pull measurements and tuning were performed with low RF power. The RFQ has been conditioned to 59 kW in August 2017, which is sufficient to accelerate the Key Performance Parameter (KPP) beams, Argon and Krypton. The RFQ has been successful-ly commissioned with KPP beams in CW regime in Octo-ber 2017. 40Ar⁹⁺ and 86Kr¹⁷⁺ beams were accelerated by the FRIB RFQ in the CW regime to the designed energy of 0.5 MeV/u. With the multi-harmonic buncher operation-al, the FRIB RFQ commissioning has been completed with bunched beam in February 2018. The beam trans-mission efficiency through the RFQ was in good agree-ment with PARMTEQ simulation results. The detailed results from the FRIB RFQ tuning, high power condition-ing and beam commissioning will be presented in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL039

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEXGBF3

RF System for FRIB Accelerator

1765

D.G. Morris, J. Brandon, N.K. Bultman, K.D. Davidson, A. Facco, P.E. Gibson, L. Hodges, M.G. Konrad, T.L. Larter, H. Maniar, P. Morrison, P.N. Ostroumov, J.T. Popielarski, G. Pozdeyev, H.T. Ren, T. Russo, K. Schrock, R. Walker, J. Wei, T. Xu, Y. Xu, S. Zhao
FRIB, East Lansing, USA
A. Facco
INFN/LNL, Legnaro (PD), Italy

The RF system of the FRIB driver accelerator includes solid state amplifiers up to 18 kW operating at frequencies from 80.5 MHz to 322 MHz. Much higher power is required for the normal conducting RFQ, ~100 kW, and it is based on vacuum tubes. This invited talk presents the performance of solid state amplifiers and LLRF in off-line testing and on-line testing of the RFQ amplifier.

Slides WEXGBF3 [14.107 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEXGBF3

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)