IPAC2018 - List of Authors (Guo, J.)

Paper	Title	Page
TUPAL068	The Development of a Nw Fast Harmonic Kicker for the JLEIC Circulator Cooling Ring	1171
	G.-T. Park, F. Fors, J. Guo, R.A. Rimmer, H. Wang, S. Wang JLab, Newport News, Virginia, USA
	Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. After the first half-scale, 5 harmonic kicker cavity prototyping * for the JLEIC's CCR/ERL electron cooler and the beam dynamic simulation study of the 10-turn CCR *. The optimized circulation cooling turns has been changed to 11 and only 5 odd-harmonic modes from 86.6 MHz to 779.4 MHz plus a DC bias are needed for the harmonic RF kicker system. The new cavity design including the electromagnetic and thermal cooling optimization and its 11 turns beam bunch tracking simulation with the new numerology of RF deflecting voltages will be presented. Further design specifications for its RF harmonic drive and the broadband RF window, coupler and circulator component will be given for handling 5 kW of total RF power. Y, Huang, H. Wang et al., Physical Review Accelerators and Beams 19, 122001 (2016). ** Y. Huang, H. Wang et al., Physical Review Accelerators and Beams 19, 084201 (2016).
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL068
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAK122	Longitudinal Coupled Bunch Instability in JLEIC	3530
	R. Li, J. Guo, F. Marhauser, S. Wang JLab, Newport News, Virginia, USA
	Funding: This work is supported by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. The luminosity performance of the JLEIC design is achieved by using a high bunch repetition rate (476MHz) with moderate bunch charges, similar to the strategy employed in modern lepton colliders. Such a bunch configuration will make single bunch instabilities less probable, yet makes the machine more prone to the onset of longitudinal and transverse coupled bunch instabilities. Consequently, this will set higher demands on the bunch-by-bunch feedback systems to mitigate the multi-bunch instabilities. In this paper we present our detailed analysis of the growth rate of the coupled bunch instabilities for beams in both the electron and ion rings in JLEIC at the collision scenario. The implication of the growth rate on the feedback system will be discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK122
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAL134	Commissioning of the Prototype C75 Cavities in a CEBAF Cryomodule	3961
	M.A. Drury, G. Cheng, G. Ciovati, E. Daly, G.K. Davis, J. Guo, R.A. Legg, F. Marhauser, T. Powers, A.V. Reilly, R.A. Rimmer JLab, Newport News, Virginia, USA
	Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177 Prototype cavities have been built at Jefferson Lab to increase the energy of future refurbished CEBAF cryomodules to 75 MeV in the most cost efficient way. Three such cavities, named "C75", have been built from ingot Nb material of different purity and have been processed and tested. The two better performing cavities have been assembled into a "cavity pair" and installed in the latest refurbished original CEBAF cryomodule. The cryomodule was installed and commissioned in CEBAF. The results from the commissioning of the C75 cavities, compared with the original CEBAF cavities, are presented in this article. The vertical test performance of the C75 cavities was preserved in the cryomodule with one of the cavities achieving the performance specification of an accelerating gradient of 19 MV/m with a quality factor of ~8×10⁹ at 2.07 K. The performance in terms of microphonics and tuner operation was similar to that of original CEBAF cavities, as expected, and the high-order modes are properly damped. The quality factor of the two C75 cavities was the highest achieved in a CEBAF cryomodule, possibly due to the better magnetic flux expulsion of ingot Nb than standard fine-grain Nb.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL134
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAL144	952.6 MHz SRF Cavity Development for JLEIC	3982
	R.A. Rimmer, W.A. Clemens, F. Fors, J. Guo, F.E. Hannon, J. Henry, F. Marhauser, L. Turlington, H. Wang, S. Wang JLab, Newport News, Virginia, USA
	Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177 JLab is developing new SRF cavity designs at 952.6 MHz for the proposed Jefferson Lab Electron-Ion Collider (JLEIC). New cavities will be required for the ion ring, cooler ERL and booster and eventually for an upgrade of the electron ring to allow the highest possible bunch collision rate. The challenges include the need for high fundamental mode power couplers and strong HOM damping, with high HOM power capability. Initial focus is on the cooler ERL 5-cell cavity as this is a critical component for the strong, high energy, bunched-beam cooling concept. 1-cell and 5-cell Nb prototype cavities have been designed and fabricated. Details concerning the cavity fabrication and test results will be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL144
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMK108	Production of Magnetized Electron Beam from a DC High Voltage Photogun	4567
	M.A. Mamun, P.A. Adderley, J. F. Benesch, D.B. Bullard, J.R. Delayen, J.M. Grames, J. Guo, F.E. Hannon, J. Hansknecht, C. Hernandez-Garcia, R. Kazimi, G.A. Krafft, M. Poelker, R. Suleiman, M.G. Tiefenback, Y.W. Wang, S. Zhang JLab, Newport News, Virginia, USA S.A.K. Wijethunga ODU, Norfolk, Virginia, USA
	Funding: This work is supported by the Department of Energy, Laboratory Directed Research and Development funding, under contract DE-AC05-06OR23177 Bunched-beam electron cooling is a key feature of all proposed designs of the future electron-ion collider, and a requirement for achieving the highest promised collision luminosity. At the Jefferson Lab Electron Ion Collider (JLEIC), fast cooling of ion beams will be accomplished via so-called 'magnetized cooling' implemented using a recirculator ring that employs an energy recovery linac. In this contribution, we describe the production of magnetized electron beam using a compact 300 kV DC high voltage photogun with an inverted insulator geometry, and using alkali-antimonide photocathodes. Beam magnetization was assessed using a modest diagnostic beamline that includes YAG view screens used to measure the rotation of the electron beamlet passing through a narrow upstream aperture. Magnetization results are presented for different gun bias voltages and for different laser spot sizes at the photocathode, using 532 nm lasers with DC and RF time structure. Photocathode lifetime was measured at currents up to 4.5 mA, with and without beam magnetization.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK108
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPML095	Improvement of Wire-Stretching Technique to the RF Measurements of E-Center and Multipole Field for the Dipole Cavities	4885
	G.-T. Park, J. Guo, H. Wang JLab, Newport News, Virginia, USA A. Overstreet ODU, Norfolk, Virginia, USA B. P. Xiao, T. Xin BNL, Upton, Long Island, New York, USA
	Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. After the first publication* of wire-stretching technique from its principle to measure the electrical center of a deflecting cavity, more refinements of this techniques including the review of its analytical and simulation results, RF circuit improvement to improve the signal to noise ratio and its application to other cavities have been developed. These applications include the electrical center measurements for the LHC RFD and DQW crabbing cavity prototypes, multi-frequency harmonic kicker cavity for JLEIC electron cooler, TE011 cavity developed for the beam magnetization measurement, and a separator cavity at BNL**. Further development of measurement calibration, error reduction, alignment of cavity installation to the machine beam line, and multipole field analysis for the beam dynamics will be presented. H. Wang, Proceedings of NAPAC2016, pp225-228 S. A. Overstreet, BS Thesis 2017, Guilford College, Greensboro, NC J. Guo et al. these proceedings ***T. Xin et al, these proceedings
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPML095
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPML096	A Non-Invasive Magnetic Momentum Monitor Using a TE011 Cavity	4889
	J. Guo, J. Henry, M. Poelker, R.A. Rimmer, R. Suleiman, H. Wang JLab, Newport News, Virginia, USA
	Funding: Authored by Jefferson Science Associates, LLC with Laboratory Directed Research and Development funding, under U.S. DOE Contract No. DE-AC05-06OR23177. The Jefferson Lab Electron-Ion Collider (JLEIC) design relies on cooling of the ion beam with bunched electron beam. The bunched beam cooler complex consists of a high current magnetized electron source, an energy recovery linac, a circulating ring, and a pair of long solenoids where the cooling takes place. A non-invasive real time monitoring system is highly desired to quantify electron beam magnetization. The authors propose to use a passive copper RF cavity in TE011 mode as such a monitor. In this paper, we will show the mechanism and scaling law of this device, as well as the design and testing results of the prototype cavity.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPML096
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The Development of a Nw Fast Harmonic Kicker for the JLEIC Circulator Cooling Ring

1171

G.-T. Park, F. Fors, J. Guo, R.A. Rimmer, H. Wang, S. Wang
JLab, Newport News, Virginia, USA

Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177.
After the first half-scale, 5 harmonic kicker cavity prototyping * for the JLEIC's CCR/ERL electron cooler and the beam dynamic simulation study of the 10-turn CCR **. The optimized circulation cooling turns has been changed to 11 and only 5 odd-harmonic modes from 86.6 MHz to 779.4 MHz plus a DC bias are needed for the harmonic RF kicker system. The new cavity design including the electromagnetic and thermal cooling optimization and its 11 turns beam bunch tracking simulation with the new numerology of RF deflecting voltages will be presented. Further design specifications for its RF harmonic drive and the broadband RF window, coupler and circulator component will be given for handling 5 kW of total RF power.
* Y, Huang, H. Wang et al., Physical Review Accelerators and Beams 19, 122001 (2016).
** Y. Huang, H. Wang et al., Physical Review Accelerators and Beams 19, 084201 (2016).

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL068

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAK122

Longitudinal Coupled Bunch Instability in JLEIC

3530

R. Li, J. Guo, F. Marhauser, S. Wang
JLab, Newport News, Virginia, USA

Funding: This work is supported by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177.
The luminosity performance of the JLEIC design is achieved by using a high bunch repetition rate (476MHz) with moderate bunch charges, similar to the strategy employed in modern lepton colliders. Such a bunch configuration will make single bunch instabilities less probable, yet makes the machine more prone to the onset of longitudinal and transverse coupled bunch instabilities. Consequently, this will set higher demands on the bunch-by-bunch feedback systems to mitigate the multi-bunch instabilities. In this paper we present our detailed analysis of the growth rate of the coupled bunch instabilities for beams in both the electron and ion rings in JLEIC at the collision scenario. The implication of the growth rate on the feedback system will be discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK122

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAL134

Commissioning of the Prototype C75 Cavities in a CEBAF Cryomodule

3961

M.A. Drury, G. Cheng, G. Ciovati, E. Daly, G.K. Davis, J. Guo, R.A. Legg, F. Marhauser, T. Powers, A.V. Reilly, R.A. Rimmer
JLab, Newport News, Virginia, USA

Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177
Prototype cavities have been built at Jefferson Lab to increase the energy of future refurbished CEBAF cryomodules to 75 MeV in the most cost efficient way. Three such cavities, named "C75", have been built from ingot Nb material of different purity and have been processed and tested. The two better performing cavities have been assembled into a "cavity pair" and installed in the latest refurbished original CEBAF cryomodule. The cryomodule was installed and commissioned in CEBAF. The results from the commissioning of the C75 cavities, compared with the original CEBAF cavities, are presented in this article. The vertical test performance of the C75 cavities was preserved in the cryomodule with one of the cavities achieving the performance specification of an accelerating gradient of 19 MV/m with a quality factor of ~8×10⁹ at 2.07 K. The performance in terms of microphonics and tuner operation was similar to that of original CEBAF cavities, as expected, and the high-order modes are properly damped. The quality factor of the two C75 cavities was the highest achieved in a CEBAF cryomodule, possibly due to the better magnetic flux expulsion of ingot Nb than standard fine-grain Nb.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL134

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAL144

952.6 MHz SRF Cavity Development for JLEIC

3982

R.A. Rimmer, W.A. Clemens, F. Fors, J. Guo, F.E. Hannon, J. Henry, F. Marhauser, L. Turlington, H. Wang, S. Wang
JLab, Newport News, Virginia, USA

Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177
JLab is developing new SRF cavity designs at 952.6 MHz for the proposed Jefferson Lab Electron-Ion Collider (JLEIC). New cavities will be required for the ion ring, cooler ERL and booster and eventually for an upgrade of the electron ring to allow the highest possible bunch collision rate. The challenges include the need for high fundamental mode power couplers and strong HOM damping, with high HOM power capability. Initial focus is on the cooler ERL 5-cell cavity as this is a critical component for the strong, high energy, bunched-beam cooling concept. 1-cell and 5-cell Nb prototype cavities have been designed and fabricated. Details concerning the cavity fabrication and test results will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL144

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMK108

Production of Magnetized Electron Beam from a DC High Voltage Photogun

4567

M.A. Mamun, P.A. Adderley, J. F. Benesch, D.B. Bullard, J.R. Delayen, J.M. Grames, J. Guo, F.E. Hannon, J. Hansknecht, C. Hernandez-Garcia, R. Kazimi, G.A. Krafft, M. Poelker, R. Suleiman, M.G. Tiefenback, Y.W. Wang, S. Zhang
JLab, Newport News, Virginia, USA
S.A.K. Wijethunga
ODU, Norfolk, Virginia, USA

Funding: This work is supported by the Department of Energy, Laboratory Directed Research and Development funding, under contract DE-AC05-06OR23177
Bunched-beam electron cooling is a key feature of all proposed designs of the future electron-ion collider, and a requirement for achieving the highest promised collision luminosity. At the Jefferson Lab Electron Ion Collider (JLEIC), fast cooling of ion beams will be accomplished via so-called 'magnetized cooling' implemented using a recirculator ring that employs an energy recovery linac. In this contribution, we describe the production of magnetized electron beam using a compact 300 kV DC high voltage photogun with an inverted insulator geometry, and using alkali-antimonide photocathodes. Beam magnetization was assessed using a modest diagnostic beamline that includes YAG view screens used to measure the rotation of the electron beamlet passing through a narrow upstream aperture. Magnetization results are presented for different gun bias voltages and for different laser spot sizes at the photocathode, using 532 nm lasers with DC and RF time structure. Photocathode lifetime was measured at currents up to 4.5 mA, with and without beam magnetization.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK108

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPML095

Improvement of Wire-Stretching Technique to the RF Measurements of E-Center and Multipole Field for the Dipole Cavities

4885

G.-T. Park, J. Guo, H. Wang
JLab, Newport News, Virginia, USA
A. Overstreet
ODU, Norfolk, Virginia, USA
B. P. Xiao, T. Xin
BNL, Upton, Long Island, New York, USA

Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177.
After the first publication* of wire-stretching technique from its principle to measure the electrical center of a deflecting cavity, more refinements of this techniques including the review of its analytical and simulation results, RF circuit improvement to improve the signal to noise ratio and its application to other cavities have been developed. These applications include the electrical center measurements for the LHC RFD and DQW crabbing cavity prototypes, multi-frequency harmonic kicker cavity for JLEIC electron cooler**, TE011 cavity developed for the beam magnetization measurement***, and a separator cavity at BNL****. Further development of measurement calibration, error reduction, alignment of cavity installation to the machine beam line, and multipole field analysis for the beam dynamics will be presented.
*H. Wang, Proceedings of NAPAC2016, pp225-228
**S. A. Overstreet, BS Thesis 2017, Guilford College, Greensboro, NC
***J. Guo et al. these proceedings
****T. Xin et al, these proceedings

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPML095

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPML096

A Non-Invasive Magnetic Momentum Monitor Using a TE011 Cavity

4889

J. Guo, J. Henry, M. Poelker, R.A. Rimmer, R. Suleiman, H. Wang
JLab, Newport News, Virginia, USA

Funding: Authored by Jefferson Science Associates, LLC with Laboratory Directed Research and Development funding, under U.S. DOE Contract No. DE-AC05-06OR23177.
The Jefferson Lab Electron-Ion Collider (JLEIC) design relies on cooling of the ion beam with bunched electron beam. The bunched beam cooler complex consists of a high current magnetized electron source, an energy recovery linac, a circulating ring, and a pair of long solenoids where the cooling takes place. A non-invasive real time monitoring system is highly desired to quantify electron beam magnetization. The authors propose to use a passive copper RF cavity in TE011 mode as such a monitor. In this paper, we will show the mechanism and scaling law of this device, as well as the design and testing results of the prototype cavity.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPML096

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)