Author: Gethmann, J.
Paper Title Page
WEPAL028 Study of the Influence of the CSR Impedance on the Synchronous Phase Shift at KARA 2223
 
  • P. Schönfeldt, E. Blomley, M. Brosi, E. Bründermann, J. Gethmann, B. Kehrer, A.-S. Müller, A.I. Papash, J.L. Steinmann
    KIT, Karlsruhe, Germany
 
  Funding: This work has been supported by the German Federal Ministry of Education and Research (Grant No. 05K16VKA) and the Helmholtz Association (Contract No. VH-NG-320).
Measurements of the bunch current dependent synchronous phase shift are a standard method to characterize the impedance of a storage ring. To study this shift, different experimental approaches can be used. In this contribution, we first derive the phase shift caused by the impedance describing the emission of coherent synchrotron radiation (CSR) based on numerical simulations of the longitudinal phase space. The predicted shift is compared to measurement results obtained by time-correlated single photon counting.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL028  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAK029 Studies of the Micro-Bunching Instability in the Presence of a Damping Wiggler 3273
 
  • M. Brosi, A. Bernhard, J. Gethmann, B. Kehrer, A.-S. Müller, A.I. Papash, P. Schreiber, P. Schönfeldt, J.L. Steinmann
    KIT, Karlsruhe, Germany
 
  Funding: Funded by BMBF (grant: 05K16VKA) & Helmholtz (contract: VH-NG-320). Supported by the Helmholtz International Research School for Teratronics & Karlsruhe School of Elementary and Astroparticle Physics.
At the KIT storage ring KARA (KArlsruhe Research Accelerator), the momentum compaction factor can be reduced leading to natural bunch lengths in the ps range. Due to the high degree of longitudinal compression the micro-bunching instability arises. During this longitudinal instability the bunches emit bursts of intense coherent synchrotron radiation in the THz frequency range caused by the complex longitudinal dynamics. The temporal pattern of the emitted bursts depends on given machine parameters, like momentum compaction factor, acceleration voltage, and damping time. In this paper the influence of the damping time is studied by utilizing the CLIC damping wiggler prototype installed in KARA as well as by simulations using the Vlasov-Fokker-Planck solver Inovesa.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK029  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMF070 Non-Linear Optics and Low Alpha Operation at the Storage Ring KARA at KIT 4235
 
  • A.I. Papash, E. Blomley, M. Brosi, J. Gethmann, B. Kehrer, A.-S. Müller, M. Schuh, P. Schönfeldt, J.L. Steinmann
    KIT, Karlsruhe, Germany
 
  The storage ring Karlsruhe Research Accelerator (KARA) at KIT operate in a wide energy range from 0.5 to 2.5 GeV. Different non-linear effects, in particular, residual octupole components of the magnetic field of the CATACT wiggler at high field level (2.5 T), proximity of the working point to a vertical sextupole resonance Qy=8/3 and weak coupling octupole resonance 2Qx+2Qy=19, high chromaticity, etc. decrease the beam life time. This is because of the reduced dynamic aperture and momentum acceptance for off-momentum particles. A new operation point at high vertical tune Qy=2.81 was tested. For this, injection and ramping tables have been modified. First the values were optimized by simulations, then during beam tests, to minimize betatron tune shaking during beam-energy ramps. It stabilized high-current beams by the fast-feedback system the whole process: injection at 0.5 GeV, ramping, and operation at 1.3 GeV cycles. It essentially improved life time and beam current. In addition, new low-alpha tables have been created and tested, resulting in the reduction of the momentum compaction factor to 10-4. Short bunch operation at 0.5GeV injection energy was also tested successfully.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF070  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)