| Paper | Title | Page |
|---|---|---|
| THPAL081 | A 3 GHz SRF Reduced-beta Cavity for the S-DALINAC | 3838 |
|
||
|
Funding: Work supported by DFG through GRK 2128 In order to reduce the energy spread and to be able to use a 200 keV spin-polarized electron source, the initial part of the injector linac of the superconducting Darmstadt electron linear accelerator S-DALINAC needs to be upgraded. The decisions on the cavity type, number of cells and value of geometric beta are motivated. The main part of this work is dedicated to the mechanical design of the cavity. A precise evaluation of the mechanical characteristics of an SRF cavity is necessary during the design stage. The dependence of the resonant frequency of the fundamental mode on external mechanical loads needs to be investigated for developing the tuning procedures. The results of the multiphysics simulations and of the optimization of the mechanical design are presented. |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL081 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPMK100 | Setup for Cooled GaAs Cathodes With Increased Charge Lifetime | 4542 |
| SUSPF024 | use link to see paper's listing under its alternate paper code | |
|
||
|
Funding: DFG (GRK 2128) BMBF (05H15RDRB1) GaAs photocathode lifetime is limited, and to ensure re- liable operation for high power-applications it is necessary to maximize its charge lifetime. By using a cryogenic sub- volume it is expected to improve the local vacuum condi- tions due to cryogenic adsorption of reactive residual gas molecules. Yielding an enhanced lifetime of the negative- electron-affinity surface of the cathode. Furthermore the cooling of the cathode itself ishould allow higher laser power deposition in the material. Introducing an electrostatic bend is expected to reduces the ion-backbombardment on the cath- ode surface. A dedicated set-up is being developed at the Photo-CATCH test facility in Darmstadt, Germany to measure the charac- teristics of such a cryogenic source. This contribution updates the report given at PSTP 2017. |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK100 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPMK101 | Inverted Geometry Photo-Electron Gun Research and Development at TU Darmstadt | 4545 |
|
||
|
Funding: Work supported by the Deutsche Forschungsgemeinschaft through GRK 2128 'AccelencE' The Institute for nuclear physics at TU Darmstadt houses the Superconducting Darmstadt Linear Accelerator S-DALINAC. A photo-electron gun using GaAs photocathodes to provide pulsed and/or polarized electron beams, the S-DALINAC Polarized Injector SPIn, has been installed * for future nuclear-structure investigations**. In order to conduct research and development for this source, a test facility for Photo-Cathode Activation, Test and Cleaning using atomic-Hydrogen (Photo-CATCH) has been constructed***. This setup provides several chambers for photocathode handling and a 60 keV beamline for photo-gun design studies****. Currently, an upgraded inverted insulator geometry is under investigation for Photo-CATCH that is supposed to be implemented at SPIn. We will present the current developments at Photo-CATCH and future measurements. * Y. Poltoratska et al., J. Phys.: Conf. Series 298 (2011) ** J. Enders, AIP Conf. Proc. 1563, 223 (2013) *** M. Espig, Diss., TU Darmstadt (2016) **** N. Kurichiyanil, Diss., TU Darmstadt (2016) |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK101 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |