IPAC2018 - List of Authors (Dou, W.P.)

Paper	Title	Page
TUPAL050	Progress Work on a CW Deuteron RFQ with Magnetic Coupling Windows	1123
SUSPF054	use link to see paper's listing under its alternate paper code
	Q. Fu, M.J. Easton, P.P. Gan, S.L. Gao, H.P. Li, Y.R. Lu, Q.Y. Tan, Z. Wang, K. Zhu PKU, Beijing, People's Republic of China W.P. Dou, Y. He IMP/CAS, Lanzhou, People's Republic of China
	Funding: This work was supported by the National Basic Research Program of China (Grant No. 2014CB845503). A new 162.5 MHz RFQ has been built for a joint 973 project between Peking University (PKU) and Institute of Modern Physics (IMP). It is designed to deliver 50-mA deuteron beams to 1 MeV in CW mode, with an inter-voltage of 60 kV and a length of 1.809 m. Due to its window-type structure, the RFQ has compact cross-section, sufficient mode separation and high specific shunt impedance. It consists of two segments fabricated and installed at IMP. The assembling error of the cavity is less than 0.05 mm. The RF measurements show good electrical properties of the resonant cavity with a measured unloaded quality factor equal to 96.4% of the simulated value. After tuning, we obtained the nominal frequency and field unbalance within 1.0%. Preparation of high-power test of this RFQ is underway. This paper will cover the fabrication details and RF measurements, as well as the progress of high-power test.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL050
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

TUPAL050

Progress Work on a CW Deuteron RFQ with Magnetic Coupling Windows

1123

SUSPF054

use link to see paper's listing under its alternate paper code

Q. Fu, M.J. Easton, P.P. Gan, S.L. Gao, H.P. Li, Y.R. Lu, Q.Y. Tan, Z. Wang, K. Zhu
PKU, Beijing, People's Republic of China
W.P. Dou, Y. He
IMP/CAS, Lanzhou, People's Republic of China

Funding: This work was supported by the National Basic Research Program of China (Grant No. 2014CB845503).
A new 162.5 MHz RFQ has been built for a joint 973 project between Peking University (PKU) and Institute of Modern Physics (IMP). It is designed to deliver 50-mA deuteron beams to 1 MeV in CW mode, with an inter-voltage of 60 kV and a length of 1.809 m. Due to its window-type structure, the RFQ has compact cross-section, sufficient mode separation and high specific shunt impedance. It consists of two segments fabricated and installed at IMP. The assembling error of the cavity is less than 0.05 mm. The RF measurements show good electrical properties of the resonant cavity with a measured unloaded quality factor equal to 96.4% of the simulated value. After tuning, we obtained the nominal frequency and field unbalance within 1.0%. Preparation of high-power test of this RFQ is underway. This paper will cover the fabrication details and RF measurements, as well as the progress of high-power test.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL050

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)