IPAC2018 - List of Authors (Cousineau, S.M.)

Paper	Title	Page
TUPAL044	Technical Workings of the 6D Phase Measurement at SNS	1107
SUSPF053	use link to see paper's listing under its alternate paper code
	B.L. Cathey ORNL RAD, Oak Ridge, Tennessee, USA A.V. Aleksandrov, S.M. Cousineau, A.P. Zhukov ORNL, Oak Ridge, Tennessee, USA
	Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy. This work has been partially supported by NSF Accelerator Science grant 1535312. The Beam Test Facility (BTF) is a functional duplicate of the Spallation Neutron Source (SNS) frontend with a 2.5 MeV beam on which the first six-dimensional phase space measurement has been completed. This presentation will show the technical underpinnings involved in performing the 6D scan with the BTF. The first part will examine the diagnostic setup involving apertures, a screen, and a bunch shape monitor and how the integrated system functions. The next part will cover the scan logic used in the software. The last part will briefly discuss ongoing efforts to analyze 6D measurements and identify correlations.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL044
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAL045	Towards Operational Scalability for H⁻ Laser Assisted Charge Exchange	1110
	S.M. Cousineau, A.V. Aleksandrov, T.V. Gorlov, Y. Liu, M.A. Plum, A. Rakhman, A.P. Shishlo ORNL, Oak Ridge, Tennessee, USA D.E. Johnson, S. Nagaitsev Fermilab, Batavia, Illinois, USA M.J. Kay UTK, Knoxville, Tennessee, USA
	The experimental development of H⁻ laser assisted charge exchange, a.k.a. laser stripping, has been ongoing at the SNS accelerator since 2006 in a three-phase approach. The first two phases associated with proof-of-principle and proof-of-practicality experiments have been successfully completed and demonstrated >95% H⁻ stripping efficiency for up to 10 us. The final phase is a proof-of-scalability stage to demonstrate that the method can be deployed for realistic beam duty factors. The experimental component of this effort is centered on achieving high efficiency stripping through the use of a laser power amplification scheme to recycle the macropulse laser light at the interaction point of the H⁻ stripping. Such a recycling cavity will be necessary for any future operational laser stripping system with at least millisecond duration H⁻ pulses. A second component of the proof-of-scalability phase is to develop a conceptual design for a realistic laser stripping scheme. The status of these efforts and challenges associated with deploying the recycling cavity into the laser stripping experiment will be described in this talk.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL045
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THXGBE1	6D Beam Measurement, Challenges and Possibilities	2890
	A.V. Aleksandrov, S.M. Cousineau, A.P. Zhukov ORNL, Oak Ridge, Tennessee, USA B.L. Cathey ORNL RAD, Oak Ridge, Tennessee, USA
	A system to measure the full 6D beam parameters (not 3x2D) has been built at the SNS RFQ test stand. Such a measurement will allow detailed analysis of the beam physics from a properly measured input term. This invited provides an overview of the principles and design of this system, and reports on status and results.
	Slides THXGBE1 [4.471 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THXGBE1
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAK067	Progress Toward a Self-Consistent Beam at the Spallation Neutron Source	3382
	J.A. Holmes, S.M. Cousineau, T.V. Gorlov, M.A. Plum ORNL, Oak Ridge, Tennessee, USA N.J. Evans ORNL RAD, Oak Ridge, Tennessee, USA
	Funding: ORNL is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the US DOE. This research was supported by the DOE Office of Science, Accelerator and Detector Research Program. We have proposed to inject a self-consistent "rotating" beam into the Spallation Neutron Source (SNS). Self-consistent beam distributions are defined to be ellipsoidal, or elliptical in 2D, distributions that have uniform density and that retain these properties under all linear transformations. We have made much progress since the original proposal. We have demonstrated computationally the feasibility of injecting a rotating beam under realistic physics assumptions. We have optimized the injection scheme with respect to beam loss and to minimum necessary hardware changes. We have also determined how existing SNS beam diagnostic equipment can be used to verify the self-consistency of the injected beam. This paper will report the details of this work as well as the status of plans to carry out the self-consistency experiments.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK067
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

TUPAL044

Technical Workings of the 6D Phase Measurement at SNS

1107

SUSPF053

use link to see paper's listing under its alternate paper code

B.L. Cathey
ORNL RAD, Oak Ridge, Tennessee, USA
A.V. Aleksandrov, S.M. Cousineau, A.P. Zhukov
ORNL, Oak Ridge, Tennessee, USA

Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy. This work has been partially supported by NSF Accelerator Science grant 1535312.
The Beam Test Facility (BTF) is a functional duplicate of the Spallation Neutron Source (SNS) frontend with a 2.5 MeV beam on which the first six-dimensional phase space measurement has been completed. This presentation will show the technical underpinnings involved in performing the 6D scan with the BTF. The first part will examine the diagnostic setup involving apertures, a screen, and a bunch shape monitor and how the integrated system functions. The next part will cover the scan logic used in the software. The last part will briefly discuss ongoing efforts to analyze 6D measurements and identify correlations.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL044

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAL045

Towards Operational Scalability for H⁻ Laser Assisted Charge Exchange

1110

S.M. Cousineau, A.V. Aleksandrov, T.V. Gorlov, Y. Liu, M.A. Plum, A. Rakhman, A.P. Shishlo
ORNL, Oak Ridge, Tennessee, USA
D.E. Johnson, S. Nagaitsev
Fermilab, Batavia, Illinois, USA
M.J. Kay
UTK, Knoxville, Tennessee, USA

The experimental development of H⁻ laser assisted charge exchange, a.k.a. laser stripping, has been ongoing at the SNS accelerator since 2006 in a three-phase approach. The first two phases associated with proof-of-principle and proof-of-practicality experiments have been successfully completed and demonstrated >95% H⁻ stripping efficiency for up to 10 us. The final phase is a proof-of-scalability stage to demonstrate that the method can be deployed for realistic beam duty factors. The experimental component of this effort is centered on achieving high efficiency stripping through the use of a laser power amplification scheme to recycle the macropulse laser light at the interaction point of the H⁻ stripping. Such a recycling cavity will be necessary for any future operational laser stripping system with at least millisecond duration H⁻ pulses. A second component of the proof-of-scalability phase is to develop a conceptual design for a realistic laser stripping scheme. The status of these efforts and challenges associated with deploying the recycling cavity into the laser stripping experiment will be described in this talk.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL045

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THXGBE1

6D Beam Measurement, Challenges and Possibilities

2890

A.V. Aleksandrov, S.M. Cousineau, A.P. Zhukov
ORNL, Oak Ridge, Tennessee, USA
B.L. Cathey
ORNL RAD, Oak Ridge, Tennessee, USA

A system to measure the full 6D beam parameters (not 3x2D) has been built at the SNS RFQ test stand. Such a measurement will allow detailed analysis of the beam physics from a properly measured input term. This invited provides an overview of the principles and design of this system, and reports on status and results.

Slides THXGBE1 [4.471 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THXGBE1

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAK067

Progress Toward a Self-Consistent Beam at the Spallation Neutron Source

3382

J.A. Holmes, S.M. Cousineau, T.V. Gorlov, M.A. Plum
ORNL, Oak Ridge, Tennessee, USA
N.J. Evans
ORNL RAD, Oak Ridge, Tennessee, USA

Funding: ORNL is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the US DOE. This research was supported by the DOE Office of Science, Accelerator and Detector Research Program.
We have proposed to inject a self-consistent "rotating" beam into the Spallation Neutron Source (SNS). Self-consistent beam distributions are defined to be ellipsoidal, or elliptical in 2D, distributions that have uniform density and that retain these properties under all linear transformations. We have made much progress since the original proposal. We have demonstrated computationally the feasibility of injecting a rotating beam under realistic physics assumptions. We have optimized the injection scheme with respect to beam loss and to minimum necessary hardware changes. We have also determined how existing SNS beam diagnostic equipment can be used to verify the self-consistency of the injected beam. This paper will report the details of this work as well as the status of plans to carry out the self-consistency experiments.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK067

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)