IPAC2018 - List of Authors (Bertwistle, D.)

Paper	Title	Page
TUPMF039	Recommissioning of the Canadian Light Source Booster Synchrotron	1338
	W.A. Wurtz, D. Bertwistle, L.O. Dallin, X. Shen, J.M. Vogt CLS, Saskatoon, Saskatchewan, Canada
	The Canadian Light Source booster synchrotron was originally commissioned in 2002 and has worked reliably for many years. However, the operating point was not the design operating point and the booster suffered from poor quantum lifetime at the extraction energy. The low quantum lifetime caused current loss of approximately 25% in the microseconds before extraction. We have recommissioned the booster using the design optics, and the current loss before extraction is now only 6%. In this paper, we discuss the measurements and simulations involved in our recommissioning work.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF039
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMF021	Magnet Design Considerations for an Ultralow Emittance Canadian Light Source	2413
	L.O. Dallin, D. Bertwistle CLS, Saskatoon, Saskatchewan, Canada
	The strong focusing requirements for ultralow emittance light sources result in high field magnets that are very close together. High fields are readily achieved by using small magnet gaps. This is possible due to the small beam sizes involved. Reduction in the physical aperture and the reduction in the good field region requirements results in magnets with compact transverse dimensions. The very strong focusing of the magnets results in very small drift spaces between the various magnetic elements. To keep these drift spaces clear magnets with recessed coils have been studied. In such magnets the coils do not stick out beyond the end of the magnet yoke in the longitudinal direction. By placing the coils on the outer yoke loss of efficiency can be avoided while maintaining good control of the higher order field harmonics. This is very well suited for quadrupole magnets where only two coils are required. Possible designs for gradient dipoles and sexutpoles are also considered.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMF021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Recommissioning of the Canadian Light Source Booster Synchrotron

1338

W.A. Wurtz, D. Bertwistle, L.O. Dallin, X. Shen, J.M. Vogt
CLS, Saskatoon, Saskatchewan, Canada

The Canadian Light Source booster synchrotron was originally commissioned in 2002 and has worked reliably for many years. However, the operating point was not the design operating point and the booster suffered from poor quantum lifetime at the extraction energy. The low quantum lifetime caused current loss of approximately 25% in the microseconds before extraction. We have recommissioned the booster using the design optics, and the current loss before extraction is now only 6%. In this paper, we discuss the measurements and simulations involved in our recommissioning work.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF039

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMF021

Magnet Design Considerations for an Ultralow Emittance Canadian Light Source

2413

L.O. Dallin, D. Bertwistle
CLS, Saskatoon, Saskatchewan, Canada

The strong focusing requirements for ultralow emittance light sources result in high field magnets that are very close together. High fields are readily achieved by using small magnet gaps. This is possible due to the small beam sizes involved. Reduction in the physical aperture and the reduction in the good field region requirements results in magnets with compact transverse dimensions. The very strong focusing of the magnets results in very small drift spaces between the various magnetic elements. To keep these drift spaces clear magnets with recessed coils have been studied. In such magnets the coils do not stick out beyond the end of the magnet yoke in the longitudinal direction. By placing the coils on the outer yoke loss of efficiency can be avoided while maintaining good control of the higher order field harmonics. This is very well suited for quadrupole magnets where only two coils are required. Possible designs for gradient dipoles and sexutpoles are also considered.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMF021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)