IPAC2018 - List of Authors (Bernhard, A.)

Paper	Title	Page
TUPML035	FELs Driven by Laser Plasma Accelerators Operated with Transverse Gradient Undulators	1615
	F. Jafarinia, R.W. Aßmann, F. Burkart, U. Dorda, C. Lechner, B. Marchetti, R. Rossmanith, P.A. Walker DESY, Hamburg, Germany A. Bernhard, R. Rossmanith KIT, Karlsruhe, Germany
	Laser Plasma Accelerators produce beams with a significantly higher energy spread (up to a few percent) compared to conventional electron sources. The high energy spread increases significantly the gain length when used for an FEL. In order to reduce the gain length of the FEL the Transverse Gradient Undulators (TGUs) instead of conventional undulators were proposed. In this paper the limits of this concept are discussed using a modified Version of the GENESIS program. Zhirong Huang et al., Phys. Rev. Lett., 109, 204801
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPML035
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAL029	FLUTE Diagnostics Integration	2227
	M. Yan, A. Bernhard, E. Bründermann, S. Funkner, A. Malygin, S. Marsching, W. Mexner, A. Mochihashi, A.-S. Müller, M.J. Nasse, G. Niehues, R. Ruprecht, T. Schmelzer, M. Schuh, N.J. Smale, P. Wesolowski, S. Wüstling KIT, Karlsruhe, Germany I. Križnar Cosylab, Ljubljana, Slovenia
	FLUTE (Ferninfrarot Linac- Und Test-Experiment) will be a new compact versatile linear accelerator at KIT. Its primary goal is to serve as a platform for a variety of accelerator studies as well as to generate strong ultra-short THz pulses for photon science. The machine consists of an RF gun, a traveling wave linac and a D-shaped bunch compressor chicane with corresponding diagnostics sections. In this contribution, we report on the latest developments of the diagnostics components. An overview of the readout and control system integration will be given.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL029
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMG006	Experimental Setup to Characterize the Radiation Hardness of Cryogenic Bypass Diodes for the HL-LHC Inner Triplet Circuits	2620
	A. Will, G. D'Angelo, R. Denz, M.F. Favre, D. Hagedorn, G. Kirby, T. Koettig, A. Monteuuis, F. Rodriguez-Mateos, A.P. Siemko, K. Stachon, M. Valette, A.P. Verweij, D. Wollmann CERN, Geneva, Switzerland A. Bernhard, A.-S. Müller KIT, Karlsruhe, Germany L. Kistrup KEA, Copenhagen, Denmark
	Funding: Work supported by the Wolfgang Gentner Programme of the German Federal Ministry of Education and Research For the high luminosity upgrade of the Large Hadron Collider (LHC), it is planned to replace the existing triplet quadrupole magnets with Nb₃Sn quadrupole magnets, which provide a comparable integrated field gradient with a significantly increased aperture. These magnets will be powered through a novel superconducting link based on MgB₂ cables. One option for the powering layout of this triplet circuit is the use of cryogenic bypass diodes, where the diodes are located inside an extension to the magnet cryostat and operated in superfluid helium. Hence, they are exposed to radiation. For this reason the radiation hardness of existing LHC type bypass diodes and more radiation tolerant prototype diodes needs to be tested up to the radiation doses expected at their planned position during their lifetime. A first irradiation test is planned in CERN's CHARM facility starting in spring 2018. Therefore, a cryo-cooler based cryostat to irradiate and test LHC type diodes in-situ has been designed and constructed. This paper will describe the properties of the sample diodes, the experimental roadmap and the setup installed in CHARM. Finally, the first measurement results will be discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMG006
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAK029	Studies of the Micro-Bunching Instability in the Presence of a Damping Wiggler	3273
	M. Brosi, A. Bernhard, J. Gethmann, B. Kehrer, A.-S. Müller, A.I. Papash, P. Schreiber, P. Schönfeldt, J.L. Steinmann KIT, Karlsruhe, Germany
	Funding: Funded by BMBF (grant: 05K16VKA) & Helmholtz (contract: VH-NG-320). Supported by the Helmholtz International Research School for Teratronics & Karlsruhe School of Elementary and Astroparticle Physics. At the KIT storage ring KARA (KArlsruhe Research Accelerator), the momentum compaction factor can be reduced leading to natural bunch lengths in the ps range. Due to the high degree of longitudinal compression the micro-bunching instability arises. During this longitudinal instability the bunches emit bursts of intense coherent synchrotron radiation in the THz frequency range caused by the complex longitudinal dynamics. The temporal pattern of the emitted bursts depends on given machine parameters, like momentum compaction factor, acceleration voltage, and damping time. In this paper the influence of the damping time is studied by utilizing the CLIC damping wiggler prototype installed in KARA as well as by simulations using the Vlasov-Fokker-Planck solver Inovesa.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK029
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF068	Commissioning Status of FLUTE	4229
	A. Malygin, A. Bernhard, E. Bründermann, A. Böhm, S. Funkner, S. Marsching, W. Mexner, A. Mochihashi, A.-S. Müller, M.J. Nasse, G. Niehues, R. Ruprecht, T. Schmelzer, M. Schuh, N.J. Smale, P. Wesolowski, M. Yan KIT, Karlsruhe, Germany I. Križnar Cosylab, Ljubljana, Slovenia M. Schwarz CERN, Geneva, Switzerland
	FLUTE (Ferninfrarot Linac- Und Test-Experiment) will be a new compact versatile linear accelerator at the KIT. Its primary goal is to serve as a platform for a variety of accelerator studies as well as to generate strong ultra-short THz pulses for photon science. The phase I of the project, which includes the RF photo injector providing electrons at beam energy of 7 MeV and a corresponding diagnostics section, is currently being commissioned. In this contribution, we report on the latest progress of the commissioning phase. The status of the gun conditioning will be given, followed by an overview of the RF system and the laser system.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF068
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

FELs Driven by Laser Plasma Accelerators Operated with Transverse Gradient Undulators

1615

F. Jafarinia, R.W. Aßmann, F. Burkart, U. Dorda, C. Lechner, B. Marchetti, R. Rossmanith, P.A. Walker
DESY, Hamburg, Germany
A. Bernhard, R. Rossmanith
KIT, Karlsruhe, Germany

Laser Plasma Accelerators produce beams with a significantly higher energy spread (up to a few percent) compared to conventional electron sources. The high energy spread increases significantly the gain length when used for an FEL. In order to reduce the gain length of the FEL the Transverse Gradient Undulators (TGUs) instead of conventional undulators were proposed. In this paper the limits of this concept are discussed using a modified Version of the GENESIS program*.
*Zhirong Huang et al., Phys. Rev. Lett., 109, 204801

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPML035

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAL029

FLUTE Diagnostics Integration

2227

M. Yan, A. Bernhard, E. Bründermann, S. Funkner, A. Malygin, S. Marsching, W. Mexner, A. Mochihashi, A.-S. Müller, M.J. Nasse, G. Niehues, R. Ruprecht, T. Schmelzer, M. Schuh, N.J. Smale, P. Wesolowski, S. Wüstling
KIT, Karlsruhe, Germany
I. Križnar
Cosylab, Ljubljana, Slovenia

FLUTE (Ferninfrarot Linac- Und Test-Experiment) will be a new compact versatile linear accelerator at KIT. Its primary goal is to serve as a platform for a variety of accelerator studies as well as to generate strong ultra-short THz pulses for photon science. The machine consists of an RF gun, a traveling wave linac and a D-shaped bunch compressor chicane with corresponding diagnostics sections. In this contribution, we report on the latest developments of the diagnostics components. An overview of the readout and control system integration will be given.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL029

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMG006

Experimental Setup to Characterize the Radiation Hardness of Cryogenic Bypass Diodes for the HL-LHC Inner Triplet Circuits

2620

A. Will, G. D'Angelo, R. Denz, M.F. Favre, D. Hagedorn, G. Kirby, T. Koettig, A. Monteuuis, F. Rodriguez-Mateos, A.P. Siemko, K. Stachon, M. Valette, A.P. Verweij, D. Wollmann
CERN, Geneva, Switzerland
A. Bernhard, A.-S. Müller
KIT, Karlsruhe, Germany
L. Kistrup
KEA, Copenhagen, Denmark

Funding: Work supported by the Wolfgang Gentner Programme of the German Federal Ministry of Education and Research
For the high luminosity upgrade of the Large Hadron Collider (LHC), it is planned to replace the existing triplet quadrupole magnets with Nb₃Sn quadrupole magnets, which provide a comparable integrated field gradient with a significantly increased aperture. These magnets will be powered through a novel superconducting link based on MgB₂ cables. One option for the powering layout of this triplet circuit is the use of cryogenic bypass diodes, where the diodes are located inside an extension to the magnet cryostat and operated in superfluid helium. Hence, they are exposed to radiation. For this reason the radiation hardness of existing LHC type bypass diodes and more radiation tolerant prototype diodes needs to be tested up to the radiation doses expected at their planned position during their lifetime. A first irradiation test is planned in CERN's CHARM facility starting in spring 2018. Therefore, a cryo-cooler based cryostat to irradiate and test LHC type diodes in-situ has been designed and constructed. This paper will describe the properties of the sample diodes, the experimental roadmap and the setup installed in CHARM. Finally, the first measurement results will be discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMG006

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAK029

Studies of the Micro-Bunching Instability in the Presence of a Damping Wiggler

3273

M. Brosi, A. Bernhard, J. Gethmann, B. Kehrer, A.-S. Müller, A.I. Papash, P. Schreiber, P. Schönfeldt, J.L. Steinmann
KIT, Karlsruhe, Germany

Funding: Funded by BMBF (grant: 05K16VKA) & Helmholtz (contract: VH-NG-320). Supported by the Helmholtz International Research School for Teratronics & Karlsruhe School of Elementary and Astroparticle Physics.
At the KIT storage ring KARA (KArlsruhe Research Accelerator), the momentum compaction factor can be reduced leading to natural bunch lengths in the ps range. Due to the high degree of longitudinal compression the micro-bunching instability arises. During this longitudinal instability the bunches emit bursts of intense coherent synchrotron radiation in the THz frequency range caused by the complex longitudinal dynamics. The temporal pattern of the emitted bursts depends on given machine parameters, like momentum compaction factor, acceleration voltage, and damping time. In this paper the influence of the damping time is studied by utilizing the CLIC damping wiggler prototype installed in KARA as well as by simulations using the Vlasov-Fokker-Planck solver Inovesa.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK029

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF068

Commissioning Status of FLUTE

4229

A. Malygin, A. Bernhard, E. Bründermann, A. Böhm, S. Funkner, S. Marsching, W. Mexner, A. Mochihashi, A.-S. Müller, M.J. Nasse, G. Niehues, R. Ruprecht, T. Schmelzer, M. Schuh, N.J. Smale, P. Wesolowski, M. Yan
KIT, Karlsruhe, Germany
I. Križnar
Cosylab, Ljubljana, Slovenia
M. Schwarz
CERN, Geneva, Switzerland

FLUTE (Ferninfrarot Linac- Und Test-Experiment) will be a new compact versatile linear accelerator at the KIT. Its primary goal is to serve as a platform for a variety of accelerator studies as well as to generate strong ultra-short THz pulses for photon science. The phase I of the project, which includes the RF photo injector providing electrons at beam energy of 7 MeV and a corresponding diagnostics section, is currently being commissioned. In this contribution, we report on the latest progress of the commissioning phase. The status of the gun conditioning will be given, followed by an overview of the RF system and the laser system.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF068

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)