ICALEPCS2019 - List of Authors (Ghabrous Larrea, C.)

Paper	Title	Page
MOPHA105	Adaptation of CERN Power Converter Controls for Integration into Other Laboratories using EPICS and TANGO	462
	S.T. Page, J. Afonso, C. Ghabrous Larrea, J. Herttuainen, Q. King, B. Todd CERN, Geneva, Switzerland
	Modern power converters (power supplies) at CERN use proprietary controls hardware, which is integrated into the wider control system by software device servers developed specifically for the CERN environment, built using CERN libraries and communication protocols. There is a growing need to allow other HEP laboratories to make use of power converters that were originally developed for CERN and, consequently, a desire to allow for their efficient integration into control systems used at those laboratories, which are generally based upon either of the EPICS and Tango frameworks. This paper gives an overview of power converter equipment and software currently being provided to other laboratories through CERN’s Knowledge and Technology Transfer program and describes differences identified between CERN’s control system model and that of EPICS, which needed to be accounted for. A reference EPICS implementation provided by CERN to other laboratories to facilitate integration of the CERN power converter controls is detailed and the prospects for the development of a Tango equivalent in the future are also covered.
	Poster MOPHA105 [2.417 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOPHA105
About •	paper received ※ 27 September 2019 paper accepted ※ 11 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPHA106	FGC3.2: A New Generation of Embedded Controls Computer for Power Converters at CERN	468
	S.T. Page, C. Ghabrous Larrea, Q. King, B. Todd, S. Uznanski, D.J. Zielinski CERN, Geneva, Switzerland
	Modern power converters (power supplies) at CERN are controlled by devices known as Function Generator/Controllers (FGCs), which are embedded computer systems providing function generation, current and field regulation, and state control. FGCs were originally conceived for the LHC in the early 2000s, though later generations are now increasingly being deployed in the accelerators in the LHC Injector Chain (Linac4, Booster, Proton Synchrotron and SPS) to replace obsolete equipment. A new generation of FGC known as the FGC3.2 is currently in development, which will provide for the evolving needs of the CERN accelerator complex and additionally be supplied to other HEP laboratories through CERN’s Knowledge and Technology Transfer program. This paper describes the evolution of FGCs, summarizes tests performed to evaluate candidate components for the FGC3.2 and details the final hardware and software architectures which were chosen. The new controller will make use of a multi-core ARM-based system-on-chip (SoC) running an embedded Linux operating system in contrast to earlier generations which combined a microcontroller and DSP with software running on ’bare metal’.
	Poster MOPHA106 [2.986 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOPHA106
About •	paper received ※ 27 September 2019 paper accepted ※ 10 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Adaptation of CERN Power Converter Controls for Integration into Other Laboratories using EPICS and TANGO

462

S.T. Page, J. Afonso, C. Ghabrous Larrea, J. Herttuainen, Q. King, B. Todd
CERN, Geneva, Switzerland

Modern power converters (power supplies) at CERN use proprietary controls hardware, which is integrated into the wider control system by software device servers developed specifically for the CERN environment, built using CERN libraries and communication protocols. There is a growing need to allow other HEP laboratories to make use of power converters that were originally developed for CERN and, consequently, a desire to allow for their efficient integration into control systems used at those laboratories, which are generally based upon either of the EPICS and Tango frameworks. This paper gives an overview of power converter equipment and software currently being provided to other laboratories through CERN’s Knowledge and Technology Transfer program and describes differences identified between CERN’s control system model and that of EPICS, which needed to be accounted for. A reference EPICS implementation provided by CERN to other laboratories to facilitate integration of the CERN power converter controls is detailed and the prospects for the development of a Tango equivalent in the future are also covered.

Poster MOPHA105 [2.417 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOPHA105

About •

paper received ※ 27 September 2019 paper accepted ※ 11 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPHA106

FGC3.2: A New Generation of Embedded Controls Computer for Power Converters at CERN

468

S.T. Page, C. Ghabrous Larrea, Q. King, B. Todd, S. Uznanski, D.J. Zielinski
CERN, Geneva, Switzerland

Modern power converters (power supplies) at CERN are controlled by devices known as Function Generator/Controllers (FGCs), which are embedded computer systems providing function generation, current and field regulation, and state control. FGCs were originally conceived for the LHC in the early 2000s, though later generations are now increasingly being deployed in the accelerators in the LHC Injector Chain (Linac4, Booster, Proton Synchrotron and SPS) to replace obsolete equipment. A new generation of FGC known as the FGC3.2 is currently in development, which will provide for the evolving needs of the CERN accelerator complex and additionally be supplied to other HEP laboratories through CERN’s Knowledge and Technology Transfer program. This paper describes the evolution of FGCs, summarizes tests performed to evaluate candidate components for the FGC3.2 and details the final hardware and software architectures which were chosen. The new controller will make use of a multi-core ARM-based system-on-chip (SoC) running an embedded Linux operating system in contrast to earlier generations which combined a microcontroller and DSP with software running on ’bare metal’.

Poster MOPHA106 [2.986 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOPHA106

About •

paper received ※ 27 September 2019 paper accepted ※ 10 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)