SRF2021 - List of Authors (Pezzato, L.)

Paper	Title	Page
TUPCAV003	1.3 GHz Seamless Copper Cavities via CNC Spinning Technique	440
	F. Sciarrabba, O. Azzolini, G. Keppel, C. Pira INFN/LNL, Legnaro (PD), Italy I. Calliari, R. Guggia, L. Pezzato, M. Pigato UNIPD, Padova, Italy
	The spinning process is an established technology for the production of seamless resonant cavities. The main drawback is that, so far, a manual process is adopted, so the quality of the product is subject to the worker’s skills. The Compute Numerical Controlled (CNC) applied to the spinning process can be used to limit this problem and increase the reproducibility and geometrical accuracy of the cavities obtained. This work reports the first 1.3 GHz SRF seamless copper cavities produced by CNC spinning at the Laboratori Nazionali di Legnaro of INFN. For this purpose, metrological analysis were conducted to verify the geometrical accuracy of the cavities after different steps of forming and thermal treatments; axial profile and wall thickness measurements were carried out, investigating different zones of the cavity profile. The cavities were also characterized through mechanical and microstructural analysis, to identify the effect of the automatic forming process applied to the production process of the 1.3 GHz SRF seamless copper cavities.
	Poster TUPCAV003 [1.030 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-TUPCAV003
About •	Received ※ 21 June 2021 — Revised ※ 12 July 2021 — Accepted ※ 23 August 2021 — Issue date ※ 24 December 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

1.3 GHz Seamless Copper Cavities via CNC Spinning Technique

440

F. Sciarrabba, O. Azzolini, G. Keppel, C. Pira
INFN/LNL, Legnaro (PD), Italy
I. Calliari, R. Guggia, L. Pezzato, M. Pigato
UNIPD, Padova, Italy

The spinning process is an established technology for the production of seamless resonant cavities. The main drawback is that, so far, a manual process is adopted, so the quality of the product is subject to the worker’s skills. The Compute Numerical Controlled (CNC) applied to the spinning process can be used to limit this problem and increase the reproducibility and geometrical accuracy of the cavities obtained. This work reports the first 1.3 GHz SRF seamless copper cavities produced by CNC spinning at the Laboratori Nazionali di Legnaro of INFN. For this purpose, metrological analysis were conducted to verify the geometrical accuracy of the cavities after different steps of forming and thermal treatments; axial profile and wall thickness measurements were carried out, investigating different zones of the cavity profile. The cavities were also characterized through mechanical and microstructural analysis, to identify the effect of the automatic forming process applied to the production process of the 1.3 GHz SRF seamless copper cavities.

Poster TUPCAV003 [1.030 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-TUPCAV003

About •

Received ※ 21 June 2021 — Revised ※ 12 July 2021 — Accepted ※ 23 August 2021 — Issue date ※ 24 December 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)