SRF2021 - List of Authors (Ostroumov, P.N.)

Paper	Title	Page
SUPCAV018	First N-Doping and Mid-T Baking of Medium-ß 644 MHz 5-Cell Elliptical Superconducting RF Cavities for Michigan State University’s Facility for Rare Isotope Beams	53
	K.E. McGee, S.H. Kim, P.N. Ostroumov, A. Taylor FRIB, East Lansing, Michigan, USA G.V. Eremeev, M. Martinello, A.V. Netepenko Fermilab, Batavia, Illinois, USA M.P. Kelly, T. Reid ANL, Lemont, Illinois, USA
	Funding: Work supported by the 2020 US DoE, Office of Science Graduate Student Research award (SCGSR), and US DoE, Office of Science, High Energy Physics under Cooperative Agreement award number DE-SC0018362 Two hadron linacs currently under development in the US, the PIP-II linac at Fermi National Accelerator Laboratory (FNAL) and the upgrade for Michigan State University’s Facility For Rare Isotope Beams (FRIB), will employ 650 and 644 MHz ß-0.6 elliptical superconducting cavities respectively to meet their design energy requirements. The desired CW operation modes of these two linacs sets Q-factor requirements well above any previously achieved for cavities at this operating frequency and velocity, driving the need to explore new high-Q treatments. The N-doping technique developed at FNAL and employed at an industrial scale to the LCLS-II cryomodules is a strong candidate for high-Q treatments, but work is needed to refine the treatment to the lower operating frequency and velocity regime. We present the first results of the first N-doping tests and a "mid-T" bake test in the FRIB 644 MHz 5-cell elliptical cavities.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-SUPCAV018
About •	Received ※ 23 June 2021 — Revised ※ 16 November 2021 — Accepted ※ 08 May 2022 — Issue date ※ 08 May 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOOFAV10	Completion of FRIB Superconducting Linac and Phased Beam Commissioning	197
	T. Xu, Y. Al-Mahmoud, H. Ao, J. Asciutto, B. Bird, J. Bonofiglio, B. Bullock, N.K. Bultman, F. Casagrande, W. Chang, Y. Choi, C. Compton, J.C. Curtin, K.D. Davidson, K. Elliott, A. Facco, V. Ganni, A. Ganshyn, J. Gao, P.E. Gibson, Y. Hao, W. Hartung, N.M. Hasan, L. Hodges, K. Holland, J.D. Hulbert, M. Ikegami, T. Kanemura, S.H. Kim, P. Knudsen, Z. Li, S.M. Lidia, G. Machicoane, C. Magsig, P.E. Manwiller, F. Marti, T. Maruta, K.E. McGee, E.S. Metzgar, S.J. Miller, D.G. Morris, H. Nguyen, P.N. Ostroumov, A.S. Plastun, J.T. Popielarski, L. Popielarski, X. Rao, M.A. Reaume, H.T. Ren, K. Saito, M. Shuptar, A. Stolz, A. Taylor, B.P. Tousignant, A.D.F. Victory, D.R. Victory, J. Wei, E.M. Wellman, J.D. Wenstrom, Y. Yamazaki, C. Zhang, Q. Zhao, S. Zhao FRIB, East Lansing, Michigan, USA K. Hosoyama KEK, Ibaraki, Japan M.P. Kelly ANL, Lemont, Illinois, USA R.E. Laxdal TRIUMF, Vancouver, Canada M. Wiseman JLab, Newport News, Virginia, USA
	Funding: This work is supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661. The Facility for Rare Isotope Beams (FRIB) is an ac-celerator-based facility funded by the US Department of Energy for nuclear physics research. FRIB is nearing the end of technical construction, with first user beams ex-pected in Summer 2022. Key features are the delivery of a variety of rare isotopes with a beam energy of ’ 200 MeV/u and a beam power of up to 400 kW. The facility is upgradable to 400 MeV/u and multi-user capability. The FRIB driver linac consists of 324 superconducting resonators and 69 superconducting solenoids in 46 cry-omodules. FRIB is the first linac to deploy a large number of HWRs (220) and the first heavy ion linac to operate at 2 K. We report on the completion of production and in-stallation of the FRIB cryomodules and phased beam commissioning results.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-MOOFAV10
About •	Received ※ 12 August 2021 — Revised ※ 16 August 2021 — Accepted ※ 21 August 2021 — Issue date ※ 04 May 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPCAV005	Toward Qualifications of HB and LB 650 MHz Cavities for the Prototype Cryomodules for the PIP-II Project	448
	M. Martinello, D.J. Bice, C. Boffo, S.K. Chandrasekaran, G.V. Eremeev, F. Furuta, T.N. Khabiboulline, K.E. McGee, A.V. Netepenko, J.P. Ozelis, A.I. Sukhanov, G. Wu Fermilab, Batavia, Illinois, USA M. Bagre, V. Jain, A. Puntambekar, S. Raghvendra, P. Shrivastava RRCAT, Indore (M.P.), India M. Bertucci, A. Bosotti, C. Pagani, R. Paparella INFN/LASA, Segrate (MI), Italy P. Bhattacharyya, S. Ghosh, S. Ghosh, A. Mandal, S. Seth, S. Som VECC, Kolkata, India M.P. Kelly, T. Reid ANL, Lemont, Illinois, USA S.H. Kim, K.E. McGee, P.N. Ostroumov FRIB, East Lansing, Michigan, USA K.K. Mistri, P.N. Prakash IUAC, New Delhi, India
	High-beta (HB) and low-beta (LB) 650 MHz cryomodules are key components of the Proton Improvement Plan II (PIP-II) project. In this contribution we present the results of several 5-cell HB650 cavities that have been processed and tested with the purpose of qualifying them for the prototype cryomodule assembly, which will take place later this year. We also present the first results obtained in LB650 single-cell cavities process optimization. Taking advantage of their very similar geometry, we are also analyzing the effect of different surface treatments in FRIB’s 5-cell medium-beta 644MHz cavities. Cavities processed with N-doping and mid-T baking showed very promising results in term of both Q-factors and accelerating gradient for these low-beta structures.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-TUPCAV005
About •	Received ※ 01 July 2021 — Accepted ※ 02 November 2021 — Issue date ※ 16 May 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

First N-Doping and Mid-T Baking of Medium-ß 644 MHz 5-Cell Elliptical Superconducting RF Cavities for Michigan State University’s Facility for Rare Isotope Beams

53

K.E. McGee, S.H. Kim, P.N. Ostroumov, A. Taylor
FRIB, East Lansing, Michigan, USA
G.V. Eremeev, M. Martinello, A.V. Netepenko
Fermilab, Batavia, Illinois, USA
M.P. Kelly, T. Reid
ANL, Lemont, Illinois, USA

Funding: Work supported by the 2020 US DoE, Office of Science Graduate Student Research award (SCGSR), and US DoE, Office of Science, High Energy Physics under Cooperative Agreement award number DE-SC0018362
Two hadron linacs currently under development in the US, the PIP-II linac at Fermi National Accelerator Laboratory (FNAL) and the upgrade for Michigan State University’s Facility For Rare Isotope Beams (FRIB), will employ 650 and 644 MHz ß-0.6 elliptical superconducting cavities respectively to meet their design energy requirements. The desired CW operation modes of these two linacs sets Q-factor requirements well above any previously achieved for cavities at this operating frequency and velocity, driving the need to explore new high-Q treatments. The N-doping technique developed at FNAL and employed at an industrial scale to the LCLS-II cryomodules is a strong candidate for high-Q treatments, but work is needed to refine the treatment to the lower operating frequency and velocity regime. We present the first results of the first N-doping tests and a "mid-T" bake test in the FRIB 644 MHz 5-cell elliptical cavities.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-SUPCAV018

About •

Received ※ 23 June 2021 — Revised ※ 16 November 2021 — Accepted ※ 08 May 2022 — Issue date ※ 08 May 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOOFAV10

Completion of FRIB Superconducting Linac and Phased Beam Commissioning

197

T. Xu, Y. Al-Mahmoud, H. Ao, J. Asciutto, B. Bird, J. Bonofiglio, B. Bullock, N.K. Bultman, F. Casagrande, W. Chang, Y. Choi, C. Compton, J.C. Curtin, K.D. Davidson, K. Elliott, A. Facco, V. Ganni, A. Ganshyn, J. Gao, P.E. Gibson, Y. Hao, W. Hartung, N.M. Hasan, L. Hodges, K. Holland, J.D. Hulbert, M. Ikegami, T. Kanemura, S.H. Kim, P. Knudsen, Z. Li, S.M. Lidia, G. Machicoane, C. Magsig, P.E. Manwiller, F. Marti, T. Maruta, K.E. McGee, E.S. Metzgar, S.J. Miller, D.G. Morris, H. Nguyen, P.N. Ostroumov, A.S. Plastun, J.T. Popielarski, L. Popielarski, X. Rao, M.A. Reaume, H.T. Ren, K. Saito, M. Shuptar, A. Stolz, A. Taylor, B.P. Tousignant, A.D.F. Victory, D.R. Victory, J. Wei, E.M. Wellman, J.D. Wenstrom, Y. Yamazaki, C. Zhang, Q. Zhao, S. Zhao
FRIB, East Lansing, Michigan, USA
K. Hosoyama
KEK, Ibaraki, Japan
M.P. Kelly
ANL, Lemont, Illinois, USA
R.E. Laxdal
TRIUMF, Vancouver, Canada
M. Wiseman
JLab, Newport News, Virginia, USA

Funding: This work is supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661.
The Facility for Rare Isotope Beams (FRIB) is an ac-celerator-based facility funded by the US Department of Energy for nuclear physics research. FRIB is nearing the end of technical construction, with first user beams ex-pected in Summer 2022. Key features are the delivery of a variety of rare isotopes with a beam energy of ’ 200 MeV/u and a beam power of up to 400 kW. The facility is upgradable to 400 MeV/u and multi-user capability. The FRIB driver linac consists of 324 superconducting resonators and 69 superconducting solenoids in 46 cry-omodules. FRIB is the first linac to deploy a large number of HWRs (220) and the first heavy ion linac to operate at 2 K. We report on the completion of production and in-stallation of the FRIB cryomodules and phased beam commissioning results.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-MOOFAV10

About •

Received ※ 12 August 2021 — Revised ※ 16 August 2021 — Accepted ※ 21 August 2021 — Issue date ※ 04 May 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPCAV005

Toward Qualifications of HB and LB 650 MHz Cavities for the Prototype Cryomodules for the PIP-II Project

448

M. Martinello, D.J. Bice, C. Boffo, S.K. Chandrasekaran, G.V. Eremeev, F. Furuta, T.N. Khabiboulline, K.E. McGee, A.V. Netepenko, J.P. Ozelis, A.I. Sukhanov, G. Wu
Fermilab, Batavia, Illinois, USA
M. Bagre, V. Jain, A. Puntambekar, S. Raghvendra, P. Shrivastava
RRCAT, Indore (M.P.), India
M. Bertucci, A. Bosotti, C. Pagani, R. Paparella
INFN/LASA, Segrate (MI), Italy
P. Bhattacharyya, S. Ghosh, S. Ghosh, A. Mandal, S. Seth, S. Som
VECC, Kolkata, India
M.P. Kelly, T. Reid
ANL, Lemont, Illinois, USA
S.H. Kim, K.E. McGee, P.N. Ostroumov
FRIB, East Lansing, Michigan, USA
K.K. Mistri, P.N. Prakash
IUAC, New Delhi, India

High-beta (HB) and low-beta (LB) 650 MHz cryomodules are key components of the Proton Improvement Plan II (PIP-II) project. In this contribution we present the results of several 5-cell HB650 cavities that have been processed and tested with the purpose of qualifying them for the prototype cryomodule assembly, which will take place later this year. We also present the first results obtained in LB650 single-cell cavities process optimization. Taking advantage of their very similar geometry, we are also analyzing the effect of different surface treatments in FRIB’s 5-cell medium-beta 644MHz cavities. Cavities processed with N-doping and mid-T baking showed very promising results in term of both Q-factors and accelerating gradient for these low-beta structures.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-TUPCAV005

About •

Received ※ 01 July 2021 — Accepted ※ 02 November 2021 — Issue date ※ 16 May 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)