SRF2021 - List of Authors (Kanareykin, A.)

Paper	Title	Page
SUPTEV010	Electrical and Thermal Properties of Cold-Sprayed Bulk Copper and Copper-Tungsten Samples at Cryogenic Temperatures	142
	H. Pokhrel ODU, Norfolk, Virginia, USA G. Ciovati, P. Dhakal, J.K. Spradlin JLab, Newport News, Virginia, USA C.-J. Jing, A. Kanareykin Euclid TechLabs, Solon, Ohio, USA
	Funding: Work supported by the U.S. Department of Energy, Office of Science, SBIR grant DE-SC00195589 The development of high thermal conductivity coatings with pure copper or copper-tungsten alloy could be beneficial to improve the heat transfer of bulk Nb cavities for conduction cooling applications and to increase the stiffness of bulk Nb cavities cooled by liquid helium. Cold-spray is an additive manufacturing technique suitable to grow thick coatings of either Cu or CuW on a Nb substrate. Bulk (~5 mm thick) coatings of Cu and CuW were deposited on standard 3 mm thick, high-purity Nb samples and smaller samples with 2 mm x 2 mm cross section were cut for measuring the thermal conductivity and the residual resistivity ratio. The samples were subjected to annealing at different temperatures and a maximum RRR of ~130 and ~40 were measured for the Cu samples and CuW samples, respectively.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-SUPTEV010
About •	Received ※ 21 June 2021 — Revised ※ 13 August 2021 — Accepted ※ 15 November 2021 — Issue date ※ 21 March 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOTEV05	Ferro-Electric Fast Reactive Tuners for SRF
	N.C. Shipman, M.R. Coly, F. Gerigk, A. Macpherson, N. Stapley, D. Valuch, W. Venturini Delsolaro CERN, Meyrin, Switzerland I. Ben-Zvi BNL, Upton, New York, USA C.-J. Jing, A. Kanareykin Euclid TechLabs, Solon, Ohio, USA
	A Ferro-Electric Fast Reactive Tuner (FE-FRT) is a new type of tuner, utilising a novel ferro-electric material, which can change the frequency of an RF cavity on the sub-microsecond timescale and has the potential to reduce a cavity’s RF power requirements by an order of magnitude in some cases. During operation, power is continuously coupled out of the cavity, through the tuner, and reflected back into the cavity. By applying a high voltage across a ferro-electric within the tuner, the reactive load seen by the cavity is altered which causes a frequency shift in the cavity. The extremely fast response times of FE-FRTs make them especially suited to the correction of frequency variations caused by microphonics. New closed loop tuning measurements at CERN with a prototype FE-FRT and superconducting RF cavity have recently demonstrated excellent suppression of the cavity’s microphonics. The experimental set-up and the recent test results will be presented and the capabilities of this approach contrasted with more common systems, such as piezoelectric based tuners.
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Electrical and Thermal Properties of Cold-Sprayed Bulk Copper and Copper-Tungsten Samples at Cryogenic Temperatures

142

H. Pokhrel
ODU, Norfolk, Virginia, USA
G. Ciovati, P. Dhakal, J.K. Spradlin
JLab, Newport News, Virginia, USA
C.-J. Jing, A. Kanareykin
Euclid TechLabs, Solon, Ohio, USA

Funding: Work supported by the U.S. Department of Energy, Office of Science, SBIR grant DE-SC00195589
The development of high thermal conductivity coatings with pure copper or copper-tungsten alloy could be beneficial to improve the heat transfer of bulk Nb cavities for conduction cooling applications and to increase the stiffness of bulk Nb cavities cooled by liquid helium. Cold-spray is an additive manufacturing technique suitable to grow thick coatings of either Cu or CuW on a Nb substrate. Bulk (~5 mm thick) coatings of Cu and CuW were deposited on standard 3 mm thick, high-purity Nb samples and smaller samples with 2 mm x 2 mm cross section were cut for measuring the thermal conductivity and the residual resistivity ratio. The samples were subjected to annealing at different temperatures and a maximum RRR of ~130 and ~40 were measured for the Cu samples and CuW samples, respectively.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-SUPTEV010

About •

Received ※ 21 June 2021 — Revised ※ 13 August 2021 — Accepted ※ 15 November 2021 — Issue date ※ 21 March 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOTEV05

Ferro-Electric Fast Reactive Tuners for SRF

N.C. Shipman, M.R. Coly, F. Gerigk, A. Macpherson, N. Stapley, D. Valuch, W. Venturini Delsolaro
CERN, Meyrin, Switzerland
I. Ben-Zvi
BNL, Upton, New York, USA
C.-J. Jing, A. Kanareykin
Euclid TechLabs, Solon, Ohio, USA

A Ferro-Electric Fast Reactive Tuner (FE-FRT) is a new type of tuner, utilising a novel ferro-electric material, which can change the frequency of an RF cavity on the sub-microsecond timescale and has the potential to reduce a cavity’s RF power requirements by an order of magnitude in some cases. During operation, power is continuously coupled out of the cavity, through the tuner, and reflected back into the cavity. By applying a high voltage across a ferro-electric within the tuner, the reactive load seen by the cavity is altered which causes a frequency shift in the cavity. The extremely fast response times of FE-FRTs make them especially suited to the correction of frequency variations caused by microphonics. New closed loop tuning measurements at CERN with a prototype FE-FRT and superconducting RF cavity have recently demonstrated excellent suppression of the cavity’s microphonics. The experimental set-up and the recent test results will be presented and the capabilities of this approach contrasted with more common systems, such as piezoelectric based tuners.

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)