SRF2021 - List of Authors (Capatina, O.)

Paper	Title	Page
MOPCAV016	HOM Couplers and RF Antennas for HL-LHC Crab Cavities: Developments for Manufacturing	303
	S. Barrière, S. Atieh, B. Bulat, R. Calaga, S.J. Calvo, O. Capatina, T. Demazière, G. Favre, A. Gallifa Terricabras, M. Garlasché, J.-M. Geisser, J.A. Mitchell, E. Montesinos, F. Motschmann, P. Naisson, R. Ninet, L. Prever-Loiri, L.R.A. Renaglia, K. Scibor, N. Villanti CERN, Meyrin, Switzerland
	Superconducting RF crab cavities are being manufactured as part of the HL-LHC upgrade at CERN. Amongst its related ancillaries, radiofrequency HOM (High Order Modes) suppressors and field antennas are essential for reaching nominal performance during operation with high energy beams, as they monitor and control the electromagnetic fields in the cavities. Several concepts of such equipment have been engineered and manufactured, for both design validation and RF performance assessment. The following paper highlights manufacturing process definition, its challenges and the assembly strategies focusing on the ongoing RFD prototypes for the SPS beam tests. Specific tooling development and test campaigns are also described.
	Poster MOPCAV016 [1.457 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-MOPCAV016
About •	Received ※ 21 June 2021 — Revised ※ 10 July 2021 — Accepted ※ 11 November 2021 — Issue date ※ 18 November 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOCAV03	RF Dipole Crab Cavity Testing for HL-LHC	687
	N. Valverde Alonso, R. Calaga, S.J. Calvo, O. Capatina, O. Capatina, A. Castilla, M. Chiodini, C. Duval, L.M.A. Ferreira, M. Gourragne, P.J. Kohler, T. Mikkola, J.A. Mitchell, E. Montesinos, C. Pasquino, G. Pechaud, N. Stapley, M. Therasse, K. Turaj, J.D. Walker CERN, Meyrin, Switzerland A. Castilla Cockcroft Institute, Lancaster University, Lancaster, United Kingdom A. Castilla Lancaster University, Lancaster, United Kingdom
	RF Crab Cavities are an essential element of the High Luminosity LHC (HL-LHC) upgrade at CERN. Two RF dipole crab cavity used for the compensation of the horizontal crossing angle were recently manufactured and integrated into Titanium Helium tank and RF ancillaries necessary for the beam operation. The two cavities will be integrated into a cryomodule in collaboration with UK-STFC and tested with proton beams in the SPS in 2023. This paper will highlight the RF measurements during the important manufacturing steps, surface preparation and cavity performance at 2K.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-WEOCAV03
About •	Received ※ 18 June 2021 — Revised ※ 07 September 2021 — Accepted ※ 16 September 2021 — Issue date ※ 22 November 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

HOM Couplers and RF Antennas for HL-LHC Crab Cavities: Developments for Manufacturing

303

S. Barrière, S. Atieh, B. Bulat, R. Calaga, S.J. Calvo, O. Capatina, T. Demazière, G. Favre, A. Gallifa Terricabras, M. Garlasché, J.-M. Geisser, J.A. Mitchell, E. Montesinos, F. Motschmann, P. Naisson, R. Ninet, L. Prever-Loiri, L.R.A. Renaglia, K. Scibor, N. Villanti
CERN, Meyrin, Switzerland

Superconducting RF crab cavities are being manufactured as part of the HL-LHC upgrade at CERN. Amongst its related ancillaries, radiofrequency HOM (High Order Modes) suppressors and field antennas are essential for reaching nominal performance during operation with high energy beams, as they monitor and control the electromagnetic fields in the cavities. Several concepts of such equipment have been engineered and manufactured, for both design validation and RF performance assessment. The following paper highlights manufacturing process definition, its challenges and the assembly strategies focusing on the ongoing RFD prototypes for the SPS beam tests. Specific tooling development and test campaigns are also described.

Poster MOPCAV016 [1.457 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-MOPCAV016

About •

Received ※ 21 June 2021 — Revised ※ 10 July 2021 — Accepted ※ 11 November 2021 — Issue date ※ 18 November 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOCAV03

RF Dipole Crab Cavity Testing for HL-LHC

687

N. Valverde Alonso, R. Calaga, S.J. Calvo, O. Capatina, O. Capatina, A. Castilla, M. Chiodini, C. Duval, L.M.A. Ferreira, M. Gourragne, P.J. Kohler, T. Mikkola, J.A. Mitchell, E. Montesinos, C. Pasquino, G. Pechaud, N. Stapley, M. Therasse, K. Turaj, J.D. Walker
CERN, Meyrin, Switzerland
A. Castilla
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
A. Castilla
Lancaster University, Lancaster, United Kingdom

RF Crab Cavities are an essential element of the High Luminosity LHC (HL-LHC) upgrade at CERN. Two RF dipole crab cavity used for the compensation of the horizontal crossing angle were recently manufactured and integrated into Titanium Helium tank and RF ancillaries necessary for the beam operation. The two cavities will be integrated into a cryomodule in collaboration with UK-STFC and tested with proton beams in the SPS in 2023. This paper will highlight the RF measurements during the important manufacturing steps, surface preparation and cavity performance at 2K.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-WEOCAV03

About •

Received ※ 18 June 2021 — Revised ※ 07 September 2021 — Accepted ※ 16 September 2021 — Issue date ※ 22 November 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)