SRF2019 - List of Authors (Vogel, E.)

Paper	Title	Page
MOP034	European XFEL: Accelerating Module Repair at DESY	127
	D. Kostin, J. Eschke, K. Jensch, N. Krupka, D. Reschke, S. Saegebarth, J. Schaffran, M. Schalwat, P. Schilling, M. Schmökel, S. Sievers, N. Steinhau-Kühl, E. Vogel, H. Weise, M. Wiencek, B. van der Horst DESY, Hamburg, Germany
	The European XFEL is in operation since 2017. The design projected energy of 17.5 GeV was reached, even with the last 4 main linac accelerating modules not yet installed. 2 out of 4 not installed modules did suffer from strong cavity performance degradation, namely increased field emission, and required surface processing. The first of two modules is reassembled and tested. The module test results confirm a successful repair action. The module repair and test steps are described together with cavities performance evolution.
	Poster MOP034 [1.863 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP034
About •	paper received ※ 17 June 2019 paper accepted ※ 29 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP080	Status of the All Superconducting Gun Cavity at DESY	1087
	E. Vogel, S. Barbanotti, A. Brinkmann, Th. Buettner, J.I. Iversen, K. Jensch, D. Klinke, D. Kostin, W.-D. Möller, A. Muhs, J. Schaffran, M. Schmökel, J.K. Sekutowicz, S. Sievers, L. Steder, N. Steinhau-Kühl, A. Sulimov, J.H. Thie, H. Weise, M. Wenskat, M. Wiencek, L. Winkelmann, B. van der Horst DESY, Hamburg, Germany
	At DESY, the development of a 1.6-cell, 1.3 GHz all superconducting gun cavity with a lead cathode attached to its back wall is ongoing. The special features of the structure like the back wall of the half-cell and cathode hole require adaptations of the procedures used for the treatment of nine-cell TESLA cavities. Unsatisfactory test results of two prototype cavities motivated us to re-consider the back-wall design and production steps. In this contribution we present the status of the modified cavity design including accessories causing accelerating field asymmetries, like a pick up antenna located at the back wall and fundamental power- and HOM couplers. Additionally, we discuss preliminary considerations for the compensation of kicks caused by these components.
	Poster THP080 [7.365 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP080
About •	paper received ※ 20 June 2019 paper accepted ※ 02 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP081	A Cryocooled Normal Conducting and Superconducting Hybrid CW RF Gun	1091
	H.J. Qian, G. Shu, F. Stephan DESY Zeuthen, Zeuthen, Germany S. Barbanotti, B. Petersen, E. Vogel DESY, Hamburg, Germany A.A. Gorchakov, M. Gusarova MEPhI, Moscow, Russia
	Continuous wave (CW) photoinjectors have seen great progress in the last decades, such as DC gun, superconducting RF (SRF) gun and normal conducting (NC) gun. Developments of Free electron lasers and electron microscopy in the CW mode are pushing for further improvements of CW guns towards higher acceleration gradient, higher beam energy and compatibility with high QE cathodes for better beam brightness. Current SC gun gradient is limited by the cathode cell due to the complication of a cathode back plane and a normal conducting cathode plug, and R&D on SC gun improvement is ongoing. A high gradient cryocooled CW NC gun was proposed to house the high QE cathode, and a SC cavity immediately nearby gives further energy acceleration. In this paper, further RF optimization of the NC gun and ASTRA simulations of such a hybrid photoinjector are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP081
About •	paper received ※ 25 June 2019 paper accepted ※ 03 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

European XFEL: Accelerating Module Repair at DESY

127

D. Kostin, J. Eschke, K. Jensch, N. Krupka, D. Reschke, S. Saegebarth, J. Schaffran, M. Schalwat, P. Schilling, M. Schmökel, S. Sievers, N. Steinhau-Kühl, E. Vogel, H. Weise, M. Wiencek, B. van der Horst
DESY, Hamburg, Germany

The European XFEL is in operation since 2017. The design projected energy of 17.5 GeV was reached, even with the last 4 main linac accelerating modules not yet installed. 2 out of 4 not installed modules did suffer from strong cavity performance degradation, namely increased field emission, and required surface processing. The first of two modules is reassembled and tested. The module test results confirm a successful repair action. The module repair and test steps are described together with cavities performance evolution.

Poster MOP034 [1.863 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP034

About •

paper received ※ 17 June 2019 paper accepted ※ 29 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP080

Status of the All Superconducting Gun Cavity at DESY

1087

E. Vogel, S. Barbanotti, A. Brinkmann, Th. Buettner, J.I. Iversen, K. Jensch, D. Klinke, D. Kostin, W.-D. Möller, A. Muhs, J. Schaffran, M. Schmökel, J.K. Sekutowicz, S. Sievers, L. Steder, N. Steinhau-Kühl, A. Sulimov, J.H. Thie, H. Weise, M. Wenskat, M. Wiencek, L. Winkelmann, B. van der Horst
DESY, Hamburg, Germany

At DESY, the development of a 1.6-cell, 1.3 GHz all superconducting gun cavity with a lead cathode attached to its back wall is ongoing. The special features of the structure like the back wall of the half-cell and cathode hole require adaptations of the procedures used for the treatment of nine-cell TESLA cavities. Unsatisfactory test results of two prototype cavities motivated us to re-consider the back-wall design and production steps. In this contribution we present the status of the modified cavity design including accessories causing accelerating field asymmetries, like a pick up antenna located at the back wall and fundamental power- and HOM couplers. Additionally, we discuss preliminary considerations for the compensation of kicks caused by these components.

Poster THP080 [7.365 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP080

About •

paper received ※ 20 June 2019 paper accepted ※ 02 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP081

A Cryocooled Normal Conducting and Superconducting Hybrid CW RF Gun

1091

H.J. Qian, G. Shu, F. Stephan
DESY Zeuthen, Zeuthen, Germany
S. Barbanotti, B. Petersen, E. Vogel
DESY, Hamburg, Germany
A.A. Gorchakov, M. Gusarova
MEPhI, Moscow, Russia

Continuous wave (CW) photoinjectors have seen great progress in the last decades, such as DC gun, superconducting RF (SRF) gun and normal conducting (NC) gun. Developments of Free electron lasers and electron microscopy in the CW mode are pushing for further improvements of CW guns towards higher acceleration gradient, higher beam energy and compatibility with high QE cathodes for better beam brightness. Current SC gun gradient is limited by the cathode cell due to the complication of a cathode back plane and a normal conducting cathode plug, and R&D on SC gun improvement is ongoing. A high gradient cryocooled CW NC gun was proposed to house the high QE cathode, and a SC cavity immediately nearby gives further energy acceleration. In this paper, further RF optimization of the NC gun and ASTRA simulations of such a hybrid photoinjector are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP081

About •

paper received ※ 25 June 2019 paper accepted ※ 03 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)