SRF2019 - List of Authors (Tan, T.)

Paper	Title	Page
MOFAB4	Overview and SRF Requirements of the CiADS Project
	Y. He, Q. Chen, Z. Gao, H. Guo, G. Huang, Y.L. Huang, T.C. Jiang, C.L. Li, S.H. Liu, T. Tan, Y.Q. Wan, F.F. Wang, J.Q. Wu, W.M. Yue, B. Zhang, J.H. Zhang, S.H. Zhang, S.X. Zhang IMP/CAS, Lanzhou, People’s Republic of China J.P. Dai, F.S. He, Z.Q. Li, W.M. Pan IHEP, Beijing, People’s Republic of China T.C. Jiang University of Chinese Academy of Sciences, Beijing, People’s Republic of China
	Chinese initiative Accelerator Driven System started constructing in 2018. It consists a superconducting linac with 500 MeV and 5 mA; an LEB coolant fast reactor with 7.5 MW. The first beam coupling with reactor will be in 2024. The sc linac employed 5 families of superconducting resonators, two types of HWRs (β=0.1 and β=0.19), one type of double spokes (β=0.42) and two types of ellipticals (β=0.62 and β=0.82). The whole system will operate in 2 K. A space has been reserved for future upgrading to 1 GeV. As a demo of front-end of ADS, the CAFe (China ADS Front-end demo linac) has been developed and commissioned to verify the SRF techniques, high power CW beam and RAMI. 45 kW proton beam has been delivered to the dump and lasted more than 100 hours at the beginning of 2019. According to the operation experience, the challenge is the stability and performance of cavities under the heavy beam loading, some phenomenas have been observed. Up to now, the design of bulk Nb cavities have been finished and the prototype fabrication is on going. The techniques of Nb/Cu cavity and Nb₃Sn are also developed in IMP for the future project of ADS.
	Slides MOFAB4 [12.465 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP064	The Cryostat Results of Carbon Contamination and Plasma Cleaning for the Field Emission on the SRF Cavity	1038
	A.D. Wu, Q.W. Chu, H. Guo, Y. He, S.C. Huang, C.L. Li, F. Pan, Y.K. Song, T. Tan, P.R. Xiong, W.M. Yue, S.H. Zhang, H.W. Zhao IMP/CAS, Lanzhou, People’s Republic of China
	The field emission effect is the mainly limitation for the operating of SRF cavities in higher gradient with stability. In this paper, the experiments were performed to evaluate the impact of the carbon contaminants and plasma cleaning on the performance of SRF cavity. Contamination mechanism was classified into cryogenic adsorption with weak strength and chemical deposition with strong strength. For the weak strength condition, the methane was injected into the SRF cavity during vertical test to make a cryogenic adsorption layer on the inner surface of the cavity. The results revealed that the performance of SRF cavity degraded by methane physical adsorption, but the performance can be recovered by thermal cycle the cavity to 300K and pump methane out. For the strong strength condition, the chemical deposited dirty layer of carbon contamination was produced by using of Ar/CH₄ mixed PECVD method, and the SRF cavity performance was deteriorated by the severe field emission. Finally, carbon deposited cavity was treated by the Ar/O2 plasma, and its results revealed that the field emission removed greatly and the gradient was increased.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP064
About •	paper received ※ 20 June 2019 paper accepted ※ 01 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRCAB3	The Design of an Automated High-Pressure Rinsing System for SRF Cavity and the Outlook for Future Automated Cleanroom on Strings Assembly	1216
	H. Guo, Q.W. Chu, Y. He, C.L. Li, Y.K. Song, T. Tan, Z.M. You IMP/CAS, Lanzhou, People’s Republic of China
	High-pressure rinsing (HPR) and cavity assembly are two critical steps in cavity post-processing. Traditionally, high-pressure rinsing processing is based on ultra pure water system, pump, rinsing wand and simple-functional control system; cavity assembly processing is based on simple fixtures, wrenches, bolts and nuts. Beside the equipments, at least two operators are required in either of these two processing. Operators and their actions could bring mistakes and cause extra airborne particle contamination in cleanroom. To avoid the risk from labors, a robot has been introduced in IMP cleanroom for HPR assisting and assembly assisting. Labor cost and cavity RF test results are compared between the circumstances with and without robot assisting. In this work, an automated HPR system that has been designed and will be installed in IMP cleanroom will be presented. In addition, a future automated cleanroom on strings assembly will be discussed as well.
	Slides FRCAB3 [6.203 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-FRCAB3
About •	paper received ※ 03 July 2019 paper accepted ※ 12 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

MOFAB4

Overview and SRF Requirements of the CiADS Project

Y. He, Q. Chen, Z. Gao, H. Guo, G. Huang, Y.L. Huang, T.C. Jiang, C.L. Li, S.H. Liu, T. Tan, Y.Q. Wan, F.F. Wang, J.Q. Wu, W.M. Yue, B. Zhang, J.H. Zhang, S.H. Zhang, S.X. Zhang
IMP/CAS, Lanzhou, People’s Republic of China
J.P. Dai, F.S. He, Z.Q. Li, W.M. Pan
IHEP, Beijing, People’s Republic of China
T.C. Jiang
University of Chinese Academy of Sciences, Beijing, People’s Republic of China

Chinese initiative Accelerator Driven System started constructing in 2018. It consists a superconducting linac with 500 MeV and 5 mA; an LEB coolant fast reactor with 7.5 MW. The first beam coupling with reactor will be in 2024. The sc linac employed 5 families of superconducting resonators, two types of HWRs (β=0.1 and β=0.19), one type of double spokes (β=0.42) and two types of ellipticals (β=0.62 and β=0.82). The whole system will operate in 2 K. A space has been reserved for future upgrading to 1 GeV. As a demo of front-end of ADS, the CAFe (China ADS Front-end demo linac) has been developed and commissioned to verify the SRF techniques, high power CW beam and RAMI. 45 kW proton beam has been delivered to the dump and lasted more than 100 hours at the beginning of 2019. According to the operation experience, the challenge is the stability and performance of cavities under the heavy beam loading, some phenomenas have been observed. Up to now, the design of bulk Nb cavities have been finished and the prototype fabrication is on going. The techniques of Nb/Cu cavity and Nb₃Sn are also developed in IMP for the future project of ADS.

Slides MOFAB4 [12.465 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP064

The Cryostat Results of Carbon Contamination and Plasma Cleaning for the Field Emission on the SRF Cavity

1038

A.D. Wu, Q.W. Chu, H. Guo, Y. He, S.C. Huang, C.L. Li, F. Pan, Y.K. Song, T. Tan, P.R. Xiong, W.M. Yue, S.H. Zhang, H.W. Zhao
IMP/CAS, Lanzhou, People’s Republic of China

The field emission effect is the mainly limitation for the operating of SRF cavities in higher gradient with stability. In this paper, the experiments were performed to evaluate the impact of the carbon contaminants and plasma cleaning on the performance of SRF cavity. Contamination mechanism was classified into cryogenic adsorption with weak strength and chemical deposition with strong strength. For the weak strength condition, the methane was injected into the SRF cavity during vertical test to make a cryogenic adsorption layer on the inner surface of the cavity. The results revealed that the performance of SRF cavity degraded by methane physical adsorption, but the performance can be recovered by thermal cycle the cavity to 300K and pump methane out. For the strong strength condition, the chemical deposited dirty layer of carbon contamination was produced by using of Ar/CH₄ mixed PECVD method, and the SRF cavity performance was deteriorated by the severe field emission. Finally, carbon deposited cavity was treated by the Ar/O2 plasma, and its results revealed that the field emission removed greatly and the gradient was increased.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP064

About •

paper received ※ 20 June 2019 paper accepted ※ 01 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRCAB3

The Design of an Automated High-Pressure Rinsing System for SRF Cavity and the Outlook for Future Automated Cleanroom on Strings Assembly

1216

H. Guo, Q.W. Chu, Y. He, C.L. Li, Y.K. Song, T. Tan, Z.M. You
IMP/CAS, Lanzhou, People’s Republic of China

High-pressure rinsing (HPR) and cavity assembly are two critical steps in cavity post-processing. Traditionally, high-pressure rinsing processing is based on ultra pure water system, pump, rinsing wand and simple-functional control system; cavity assembly processing is based on simple fixtures, wrenches, bolts and nuts. Beside the equipments, at least two operators are required in either of these two processing. Operators and their actions could bring mistakes and cause extra airborne particle contamination in cleanroom. To avoid the risk from labors, a robot has been introduced in IMP cleanroom for HPR assisting and assembly assisting. Labor cost and cavity RF test results are compared between the circumstances with and without robot assisting. In this work, an automated HPR system that has been designed and will be installed in IMP cleanroom will be presented. In addition, a future automated cleanroom on strings assembly will be discussed as well.

Slides FRCAB3 [6.203 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-FRCAB3

About •

paper received ※ 03 July 2019 paper accepted ※ 12 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)