SRF2019 - List of Authors (Roudier, D.)

Paper	Title	Page
MOP087	IFMIF Resonators Development and Performance	293
	G. Devanz, M. Baudrier, P. Carbonnier, F. Éozénou, E. Fayette, D. Roudier, P. Sahuquet, C. Servouin CEA-DRF-IRFU, France N. Bazin, S. Chel, L. Maurice CEA-IRFU, Gif-sur-Yvette, France
	The prototype IFMIF cryomodule encloses eight superconducting 175 MHz beta 0.09 Half-Wave Resonators (HWR). They are designed together with the power coupler to accelerate a high intensity deuteron beam (125 mA) from to 5 to 9 MeV. One prototype HWR and the 8 cavities to be hosted in the cryomodule have been manufactured, prepared and tested. The paper describes the phases of the cavities development, including fabrication, processing, and RF resonant frequency management. We focus on the results of the RF tests which have been performed for all bare and jacketed HWRs in a vertical cryostat.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP087
About •	paper received ※ 23 June 2019 paper accepted ※ 03 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP019	Status of High Temperature Vacuum Heat Treatment Program at IPN Orsay	438
	M. Fouaidy, F. Chatelet, V. Delpech, F. Galet, D. Le Dréan, R. Martret, G. Olry, T. Pépin-Donat Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France M. Baudrier, P. Carbonnier, E. Fayette, X. Hanus, Th. Proslier, D. Roudier, P. Sahuquet, C. Servouin CEA-DRF-IRFU, France E. Cenni, L. Maurice CEA-IRFU, Gif-sur-Yvette, France D. Longuevergne FLUO, Orsay, France
	In the framework of ESS, a vacuum furnace dedicated to High Temperature Heat Treatment under Vacuum (VH2T2) of SRF bulk Nb cavities was developed and commissioned in May 2016. This furnace is currently used for interstitial hydrogen removal (10h00 @ 650 °C) of two type of cavities: 1) the whole series of 26 ESS 352 MHz spoke resonators equipped with their Ti LHe tank well, 2) some prototypes of ESS high beta and medium beta cavities. Up to know IPN Orsay VH2T2 (10h00 @ 650 °C) was successfully applied to more than 16 cavities. In this paper we will first report about these VH2T2 tests. Finally, we have just started testing nitrogen infusion and nitrogen doping processes on samples and 1.3 GHz cavities: the preliminary results will be discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP019
About •	paper received ※ 03 July 2019 paper accepted ※ 04 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP096	ESS Prototype Cavities Developed at CEA Saclay	1143
	E. Cenni CEA-IRFU, Gif-sur-Yvette, France M. Baudrier, P. Carbonnier, G. Devanz, X. Hanus, L. Maurice, J. Plouin, D. Roudier, P. Sahuquet CEA-DRF-IRFU, France
	The ESS elliptical superconducting Linac consists of two types of 704.42 MHz cavities, medium and high beta, to accelerate the beam from 216 MeV up to the final energy at 2 GeV. The medium and high-beta parts of the Linac are composed of 36 and 84 elliptical cavities, with geometrical beta values of 0.67 and 0.86 respectively. CEA Saclay is in charge of the cavity prototypes that is designing, manufacturing, testing and integrating them into demonstrator cryomodules. We have manufactured 6 medium beta and 5 high beta cavities and we present here the latest results concerning these activities.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP096
About •	paper received ※ 22 June 2019 paper accepted ※ 02 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP097	Field Emission Studies on ESS Elliptical Prototype Cavities at CEA Saclay	1147
	E. Cenni, M. Baudrier, G. Devanz, L. Maurice, O. Piquet, D. Roudier CEA-DRF-IRFU, France
	CEA Saclay is in charge of the cavity prototypes that is designing, manufacturing, testing and integrating them into demonstrator cryomodules. We have manufactured 6 medium beta and 5 high beta cavities. As part of these activities we are interested in field emission as one of the limiting factors for cavity performances. We are currently collecting data from cavities operated in vertical cryostat and inside cryomodules. Analysis are carried out by means of particle tracking simulation and comparison with radiation dose monitor and scintillators.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP097
About •	paper received ※ 27 June 2019 paper accepted ※ 01 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

IFMIF Resonators Development and Performance

293

G. Devanz, M. Baudrier, P. Carbonnier, F. Éozénou, E. Fayette, D. Roudier, P. Sahuquet, C. Servouin
CEA-DRF-IRFU, France
N. Bazin, S. Chel, L. Maurice
CEA-IRFU, Gif-sur-Yvette, France

The prototype IFMIF cryomodule encloses eight superconducting 175 MHz beta 0.09 Half-Wave Resonators (HWR). They are designed together with the power coupler to accelerate a high intensity deuteron beam (125 mA) from to 5 to 9 MeV. One prototype HWR and the 8 cavities to be hosted in the cryomodule have been manufactured, prepared and tested. The paper describes the phases of the cavities development, including fabrication, processing, and RF resonant frequency management. We focus on the results of the RF tests which have been performed for all bare and jacketed HWRs in a vertical cryostat.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP087

About •

paper received ※ 23 June 2019 paper accepted ※ 03 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP019

Status of High Temperature Vacuum Heat Treatment Program at IPN Orsay

438

M. Fouaidy, F. Chatelet, V. Delpech, F. Galet, D. Le Dréan, R. Martret, G. Olry, T. Pépin-Donat
Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
M. Baudrier, P. Carbonnier, E. Fayette, X. Hanus, Th. Proslier, D. Roudier, P. Sahuquet, C. Servouin
CEA-DRF-IRFU, France
E. Cenni, L. Maurice
CEA-IRFU, Gif-sur-Yvette, France
D. Longuevergne
FLUO, Orsay, France

In the framework of ESS, a vacuum furnace dedicated to High Temperature Heat Treatment under Vacuum (VH2T2) of SRF bulk Nb cavities was developed and commissioned in May 2016. This furnace is currently used for interstitial hydrogen removal (10h00 @ 650 °C) of two type of cavities: 1) the whole series of 26 ESS 352 MHz spoke resonators equipped with their Ti LHe tank well, 2) some prototypes of ESS high beta and medium beta cavities. Up to know IPN Orsay VH2T2 (10h00 @ 650 °C) was successfully applied to more than 16 cavities. In this paper we will first report about these VH2T2 tests. Finally, we have just started testing nitrogen infusion and nitrogen doping processes on samples and 1.3 GHz cavities: the preliminary results will be discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP019

About •

paper received ※ 03 July 2019 paper accepted ※ 04 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP096

ESS Prototype Cavities Developed at CEA Saclay

1143

E. Cenni
CEA-IRFU, Gif-sur-Yvette, France
M. Baudrier, P. Carbonnier, G. Devanz, X. Hanus, L. Maurice, J. Plouin, D. Roudier, P. Sahuquet
CEA-DRF-IRFU, France

The ESS elliptical superconducting Linac consists of two types of 704.42 MHz cavities, medium and high beta, to accelerate the beam from 216 MeV up to the final energy at 2 GeV. The medium and high-beta parts of the Linac are composed of 36 and 84 elliptical cavities, with geometrical beta values of 0.67 and 0.86 respectively. CEA Saclay is in charge of the cavity prototypes that is designing, manufacturing, testing and integrating them into demonstrator cryomodules. We have manufactured 6 medium beta and 5 high beta cavities and we present here the latest results concerning these activities.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP096

About •

paper received ※ 22 June 2019 paper accepted ※ 02 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP097

Field Emission Studies on ESS Elliptical Prototype Cavities at CEA Saclay

1147

E. Cenni, M. Baudrier, G. Devanz, L. Maurice, O. Piquet, D. Roudier
CEA-DRF-IRFU, France

CEA Saclay is in charge of the cavity prototypes that is designing, manufacturing, testing and integrating them into demonstrator cryomodules. We have manufactured 6 medium beta and 5 high beta cavities. As part of these activities we are interested in field emission as one of the limiting factors for cavity performances. We are currently collecting data from cavities operated in vertical cryostat and inside cryomodules. Analysis are carried out by means of particle tracking simulation and comparison with radiation dose monitor and scintillators.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP097

About •

paper received ※ 27 June 2019 paper accepted ※ 01 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)