SRF2019 - List of Authors (Muhs, A.)

Paper	Title	Page
THP080	Status of the All Superconducting Gun Cavity at DESY	1087
	E. Vogel, S. Barbanotti, A. Brinkmann, Th. Buettner, J.I. Iversen, K. Jensch, D. Klinke, D. Kostin, W.-D. Möller, A. Muhs, J. Schaffran, M. Schmökel, J.K. Sekutowicz, S. Sievers, L. Steder, N. Steinhau-Kühl, A. Sulimov, J.H. Thie, H. Weise, M. Wenskat, M. Wiencek, L. Winkelmann, B. van der Horst DESY, Hamburg, Germany
	At DESY, the development of a 1.6-cell, 1.3 GHz all superconducting gun cavity with a lead cathode attached to its back wall is ongoing. The special features of the structure like the back wall of the half-cell and cathode hole require adaptations of the procedures used for the treatment of nine-cell TESLA cavities. Unsatisfactory test results of two prototype cavities motivated us to re-consider the back-wall design and production steps. In this contribution we present the status of the modified cavity design including accessories causing accelerating field asymmetries, like a pick up antenna located at the back wall and fundamental power- and HOM couplers. Additionally, we discuss preliminary considerations for the compensation of kicks caused by these components.
	Poster THP080 [7.365 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP080
About •	paper received ※ 20 June 2019 paper accepted ※ 02 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP100	Insight into DESY’s Test Laboratory for Niobium Raw Material and Semi-finished Products	1157
	J.I. Iversen, A. Brinkmann, A. Ermakov, A. Muhs, J. Ziegler DESY, Hamburg, Germany
	DESY has started setting up a test laboratory for niobium more than 20 years ago. The initial application was to assure required surface quality of niobium sheets before its forming to half cells for the 1.3 GHz SRF Tesla shape cavities. As a first test equipment DESY developed a basic eddy current test device which was refined continuously. Since that time the laboratory grew with the requirements on R&D activities for niobium raw material and its semi-finished products. To be able to assure the Quality of niobium products needed for the European XFEL series cavity production, the Lab¿s infrastructure was updated significantly. Now the capabilities of the test laboratory cover the investigation of the fundamental physical properties of various materials including for example mechanical properties, surface, microstructure and chemical composition analysis. The Quality Assurance for the European XFEL was performed successfully on an outstanding level and in the meantime the laboratory was used for several other projects like LCLS-II and ESS. We present DESY’s test infrastructure as well as applied methods for the Quality Assurance and R&D activities and we report about experiences.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP100
About •	paper received ※ 25 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Status of the All Superconducting Gun Cavity at DESY

1087

E. Vogel, S. Barbanotti, A. Brinkmann, Th. Buettner, J.I. Iversen, K. Jensch, D. Klinke, D. Kostin, W.-D. Möller, A. Muhs, J. Schaffran, M. Schmökel, J.K. Sekutowicz, S. Sievers, L. Steder, N. Steinhau-Kühl, A. Sulimov, J.H. Thie, H. Weise, M. Wenskat, M. Wiencek, L. Winkelmann, B. van der Horst
DESY, Hamburg, Germany

At DESY, the development of a 1.6-cell, 1.3 GHz all superconducting gun cavity with a lead cathode attached to its back wall is ongoing. The special features of the structure like the back wall of the half-cell and cathode hole require adaptations of the procedures used for the treatment of nine-cell TESLA cavities. Unsatisfactory test results of two prototype cavities motivated us to re-consider the back-wall design and production steps. In this contribution we present the status of the modified cavity design including accessories causing accelerating field asymmetries, like a pick up antenna located at the back wall and fundamental power- and HOM couplers. Additionally, we discuss preliminary considerations for the compensation of kicks caused by these components.

Poster THP080 [7.365 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP080

About •

paper received ※ 20 June 2019 paper accepted ※ 02 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP100

Insight into DESY’s Test Laboratory for Niobium Raw Material and Semi-finished Products

1157

J.I. Iversen, A. Brinkmann, A. Ermakov, A. Muhs, J. Ziegler
DESY, Hamburg, Germany

DESY has started setting up a test laboratory for niobium more than 20 years ago. The initial application was to assure required surface quality of niobium sheets before its forming to half cells for the 1.3 GHz SRF Tesla shape cavities. As a first test equipment DESY developed a basic eddy current test device which was refined continuously. Since that time the laboratory grew with the requirements on R&D activities for niobium raw material and its semi-finished products. To be able to assure the Quality of niobium products needed for the European XFEL series cavity production, the Lab¿s infrastructure was updated significantly. Now the capabilities of the test laboratory cover the investigation of the fundamental physical properties of various materials including for example mechanical properties, surface, microstructure and chemical composition analysis. The Quality Assurance for the European XFEL was performed successfully on an outstanding level and in the meantime the laboratory was used for several other projects like LCLS-II and ESS. We present DESY’s test infrastructure as well as applied methods for the Quality Assurance and R&D activities and we report about experiences.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP100

About •

paper received ※ 25 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)