SRF2019 - List of Authors (Marhauser, F.)

Paper	Title	Page
MOP015	RF Performance Sensitivity to Tuning of Nb₃Sn Coated CEBAF Cavities	55
	G.V. Eremeev, W. Crahen, J. Henry, F. Marhauser, C.E. Reece JLab, Newport News, Virginia, USA U. Pudasaini The College of William and Mary, Williamsburg, Virginia, USA
	Funding: Co-Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. Based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics. Nb₃Sn has the potential to surpass niobium as the material of choice for SRF applications. The potential of this material stems from a larger superconducting energy gap, which leads to expectations of a higher RF critical field and a lower RF surface resistance. The appeal of better superconducting properties is offset by the relative complexity of producing practical Nb₃Sn structures, and Nb₃Sn sensitivity to lattice disorder challenges the use of the material for practical applications. Such sensitivity is indirectly probed during SRF cavity development, when the cavity is tuned to match the desired accelerator frequency. In the course of recent experiments we have coated and tuned several multi-cell cavities. Cold RF measurements before and after tuning showed degradation in cavity performance after tuning. The results of RF measurement were compared against strain evolution on Nb₃Sn surface during tuning based on CST and ANSYS models.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP015
About •	paper received ※ 26 June 2019 paper accepted ※ 01 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP053	Optimal Thermal Gradient for Flux Expulsion in 600°C Heat-treated CEBAF 12 GeV Upgrade Cavities	550
	R.L. Geng, F. Marhauser, P.D. Owen JLab, Newport News, Virginia, USA
	We will present results on measurement of flux expulsion in CEBAF 12 GeV upgrade cavities and original CEBAF cavities and the search for optimal thermal gradient for reducing the trapped flux in cavities installed in CEBAF linacs. Preliminary measurements of one C100 cavities has shown that a nearly perfect flux expulsion can be achieved at an optimal thermal gradient - a surprising result contrary to the expectation of zero flux expulsion for 600°C heat treated niobium cavities. These results could lead to a cost-effective path for improving the quality factor of cavities installed in CEBAF and ultimately saving accelerator operation cost.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP053
About •	paper received ※ 24 June 2019 paper accepted ※ 29 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRCAA3	Industrial Cavity Production: Lessons Learned to Push the Boundaries of Nitrogen-Doping	1199
	D. Gonnella, S. Aderhold, A. Burrill, M.C. Ross SLAC, Menlo Park, California, USA E. Daly, G.K. Davis, F. Marhauser, A.D. Palczewski, K.M. Wilson JLab, Newport News, Virginia, USA A. Grassellino, C.J. Grimm, T.N. Khabiboulline, O.S. Melnychuk, S. Posen, D.A. Sergatskov Fermilab, Batavia, Illinois, USA
	Funding: Work supported by US DOE Contract DE-AC02-76SF00515. Nitrogen doping has been proven now in several labs to enhance Q₀ values of 1.3 GHz cavities in the gradient domain favored by CW operation. The choice of doping for the LCLS-II project has given the community a wealth of statistics and experience on the challenge of transferring the doping technology to industry. Overall, industry-produced nitrogen-doped cavities have shown excellent performance, however some technical issues have arisen. This talk focuses on lessons learned from the production of over 300 nitrogen-doped cavities for LCLS-II and how issues were mitigated to further improve performance. Finally, I will discuss pushing the boundaries of nitrogen-doping further by exploring different doping regimes in order to maintain excellent Q₀ performance, while reaching higher quench fields.
	Slides FRCAA3 [16.880 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-FRCAA3
About •	paper received ※ 02 July 2019 paper accepted ※ 03 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

RF Performance Sensitivity to Tuning of Nb₃Sn Coated CEBAF Cavities

55

G.V. Eremeev, W. Crahen, J. Henry, F. Marhauser, C.E. Reece
JLab, Newport News, Virginia, USA
U. Pudasaini
The College of William and Mary, Williamsburg, Virginia, USA

Funding: Co-Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. Based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics.
Nb₃Sn has the potential to surpass niobium as the material of choice for SRF applications. The potential of this material stems from a larger superconducting energy gap, which leads to expectations of a higher RF critical field and a lower RF surface resistance. The appeal of better superconducting properties is offset by the relative complexity of producing practical Nb₃Sn structures, and Nb₃Sn sensitivity to lattice disorder challenges the use of the material for practical applications. Such sensitivity is indirectly probed during SRF cavity development, when the cavity is tuned to match the desired accelerator frequency. In the course of recent experiments we have coated and tuned several multi-cell cavities. Cold RF measurements before and after tuning showed degradation in cavity performance after tuning. The results of RF measurement were compared against strain evolution on Nb₃Sn surface during tuning based on CST and ANSYS models.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP015

About •

paper received ※ 26 June 2019 paper accepted ※ 01 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP053

Optimal Thermal Gradient for Flux Expulsion in 600°C Heat-treated CEBAF 12 GeV Upgrade Cavities

550

R.L. Geng, F. Marhauser, P.D. Owen
JLab, Newport News, Virginia, USA

We will present results on measurement of flux expulsion in CEBAF 12 GeV upgrade cavities and original CEBAF cavities and the search for optimal thermal gradient for reducing the trapped flux in cavities installed in CEBAF linacs. Preliminary measurements of one C100 cavities has shown that a nearly perfect flux expulsion can be achieved at an optimal thermal gradient - a surprising result contrary to the expectation of zero flux expulsion for 600°C heat treated niobium cavities. These results could lead to a cost-effective path for improving the quality factor of cavities installed in CEBAF and ultimately saving accelerator operation cost.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP053

About •

paper received ※ 24 June 2019 paper accepted ※ 29 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRCAA3

Industrial Cavity Production: Lessons Learned to Push the Boundaries of Nitrogen-Doping

1199

D. Gonnella, S. Aderhold, A. Burrill, M.C. Ross
SLAC, Menlo Park, California, USA
E. Daly, G.K. Davis, F. Marhauser, A.D. Palczewski, K.M. Wilson
JLab, Newport News, Virginia, USA
A. Grassellino, C.J. Grimm, T.N. Khabiboulline, O.S. Melnychuk, S. Posen, D.A. Sergatskov
Fermilab, Batavia, Illinois, USA

Funding: Work supported by US DOE Contract DE-AC02-76SF00515.
Nitrogen doping has been proven now in several labs to enhance Q₀ values of 1.3 GHz cavities in the gradient domain favored by CW operation. The choice of doping for the LCLS-II project has given the community a wealth of statistics and experience on the challenge of transferring the doping technology to industry. Overall, industry-produced nitrogen-doped cavities have shown excellent performance, however some technical issues have arisen. This talk focuses on lessons learned from the production of over 300 nitrogen-doped cavities for LCLS-II and how issues were mitigated to further improve performance. Finally, I will discuss pushing the boundaries of nitrogen-doping further by exploring different doping regimes in order to maintain excellent Q₀ performance, while reaching higher quench fields.

Slides FRCAA3 [16.880 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-FRCAA3

About •

paper received ※ 02 July 2019 paper accepted ※ 03 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)