SRF2019 - List of Authors (Imao, H.)

Paper	Title	Page
TUP037	Construction of Superconducting Linac Booster for Heavy-Ion Linac at RIKEN Nishina Center	502
	K. Yamada, T. Dantsuka, H. Imao, O. Kamigaito, K. Kusaka, H. Okuno, K. Ozeki, N. Sakamoto, K. Suda, T. Watanabe, Y. Watanabe RIKEN Nishina Center, Wako, Japan H. Hara, A. Miyamoto, K. Sennyu, T. Yanagisawa MHI-MS, Kobe, Japan E. Kako, H. Nakai, H. Sakai, K. Umemori KEK, Ibaraki, Japan
	At RIKEN Nishina Center, the RIKEN Heavy-Ion Linac (RILAC) is undergoing an upgrade of its acceleration voltage in order to allow it further investigation of new super-heavy elements. In this project, a new superconducting (SC) booster linac, so-called SRILAC, is being developed and constructed. The SRILAC consists of 10 TEM quarter-wavelength resonators made of pure niobium sheets which operate at 4 K. The target performance of each cavity is set as Q₀ of 1×10⁹ with its accelerating gradient of 6.8 MV/m. Recently we succeeded to develop high performance SC-cavities which satisfies the requirement with a wide margin. The cryomodule assembly is under way, and installation of cryomodules and He liquefaction system will be completed by the end of FY2018. The cooling-down test is scheduled in the Q1 of FY2019. This contribution makes a report on the construction status of the SRILAC.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP037
About •	paper received ※ 02 July 2019 paper accepted ※ 04 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WETEB1	Development of Superconducting Quarter-Wave Resonator and Cryomodule for Low-Beta Ion Accelerators at RIKEN Radioactive Isotope Beam Factory	750
	N. Sakamoto, T. Dantsuka, M. Fujimaki, H. Imao, O. Kamigaito, K. Kusaka, H. Okuno, K. Ozeki, K. Suda, A. Uchiyama, T. Watanabe, Y. Watanabe, K. Yamada RIKEN Nishina Center, Wako, Japan H. Hara, A. Miyamoto, K. Sennyu, T. Yanagisawa MHI-MS, Kobe, Japan E. Kako, H. Nakai, H. Sakai, K. Umemori KEK, Ibaraki, Japan
	A prototype cryomodule with a superconducting quarter- wave resonator (SC QWR) has been developed at RIKEN Radioactive Isotope Beam Factory (RIBF). During the last SRF conference, we presented the performance of our first SC QWR and the first cool-down test of its cryomodule. Since then, we have continued our efforts to improve cavity performance and succeeded in recovering deteriorated Q₀. In this paper, we report what we constructed and learned from the prototype, including design issues with the cavity and its cryomodule. Design issues related to the new SC QWRs and their cryomodules for the SC linac booster of the RIKEN Heavy-Ion Linac (RILAC) are described as well.
	Slides WETEB1 [120.252 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-WETEB1
About •	paper received ※ 24 June 2019 paper accepted ※ 05 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP013	Non-Evaporative Getter-Based Differential Pumping System for SRILAC at RIBF	419
	H. Imao RIKEN Nishina Center for Accelerator-Based Science, Wako, Saitama, Japan O. Kamigaito, N. Sakamoto, T. Watanabe, Y. Watanabe, K. Yamada RIKEN Nishina Center, Wako, Japan K. Oyamada SHI Accelerator Service Ltd., Tokyo, Japan
	Upgrades of the RIKEN heavy-ion linac (RILAC) involving a new superconducting linac (SRILAC) are undergoing to promote super-heavy element searches at the RIKEN radioactive isotope beam factory (RIBF). Stable ultra-high vacuum (<10^-8 Pa) and particulate-free conditions are strictly necessary for keeping the performance of the superconductive radio frequency (SRF) cavities of the SRILAC. It is crucially important to develop neighboring warm sections to prevent contamination from the existing old RILAC and beamlines built almost four decades ago. In the present study, non-evaporative getter-based differential pumping systems were newly developed to achieve the pressure reduction from the existing beamline vacuum (10^-5–10^-6 Pa ) to the ultra-high vacuum within very limited length (<80 cm) ensuring the large beam aperture of more than 40 mm. They are also equipped with compact electrostatic particle removers. We will describe and discuss details of the design, construction and performance of the system.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP013
About •	paper received ※ 03 July 2019 paper accepted ※ 14 August 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Construction of Superconducting Linac Booster for Heavy-Ion Linac at RIKEN Nishina Center

502

K. Yamada, T. Dantsuka, H. Imao, O. Kamigaito, K. Kusaka, H. Okuno, K. Ozeki, N. Sakamoto, K. Suda, T. Watanabe, Y. Watanabe
RIKEN Nishina Center, Wako, Japan
H. Hara, A. Miyamoto, K. Sennyu, T. Yanagisawa
MHI-MS, Kobe, Japan
E. Kako, H. Nakai, H. Sakai, K. Umemori
KEK, Ibaraki, Japan

At RIKEN Nishina Center, the RIKEN Heavy-Ion Linac (RILAC) is undergoing an upgrade of its acceleration voltage in order to allow it further investigation of new super-heavy elements. In this project, a new superconducting (SC) booster linac, so-called SRILAC, is being developed and constructed. The SRILAC consists of 10 TEM quarter-wavelength resonators made of pure niobium sheets which operate at 4 K. The target performance of each cavity is set as Q₀ of 1×10⁹ with its accelerating gradient of 6.8 MV/m. Recently we succeeded to develop high performance SC-cavities which satisfies the requirement with a wide margin. The cryomodule assembly is under way, and installation of cryomodules and He liquefaction system will be completed by the end of FY2018. The cooling-down test is scheduled in the Q1 of FY2019. This contribution makes a report on the construction status of the SRILAC.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP037

About •

paper received ※ 02 July 2019 paper accepted ※ 04 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WETEB1

Development of Superconducting Quarter-Wave Resonator and Cryomodule for Low-Beta Ion Accelerators at RIKEN Radioactive Isotope Beam Factory

750

N. Sakamoto, T. Dantsuka, M. Fujimaki, H. Imao, O. Kamigaito, K. Kusaka, H. Okuno, K. Ozeki, K. Suda, A. Uchiyama, T. Watanabe, Y. Watanabe, K. Yamada
RIKEN Nishina Center, Wako, Japan
H. Hara, A. Miyamoto, K. Sennyu, T. Yanagisawa
MHI-MS, Kobe, Japan
E. Kako, H. Nakai, H. Sakai, K. Umemori
KEK, Ibaraki, Japan

A prototype cryomodule with a superconducting quarter- wave resonator (SC QWR) has been developed at RIKEN Radioactive Isotope Beam Factory (RIBF). During the last SRF conference, we presented the performance of our first SC QWR and the first cool-down test of its cryomodule. Since then, we have continued our efforts to improve cavity performance and succeeded in recovering deteriorated Q₀. In this paper, we report what we constructed and learned from the prototype, including design issues with the cavity and its cryomodule. Design issues related to the new SC QWRs and their cryomodules for the SC linac booster of the RIKEN Heavy-Ion Linac (RILAC) are described as well.

Slides WETEB1 [120.252 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-WETEB1

About •

paper received ※ 24 June 2019 paper accepted ※ 05 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP013

Non-Evaporative Getter-Based Differential Pumping System for SRILAC at RIBF

419

H. Imao
RIKEN Nishina Center for Accelerator-Based Science, Wako, Saitama, Japan
O. Kamigaito, N. Sakamoto, T. Watanabe, Y. Watanabe, K. Yamada
RIKEN Nishina Center, Wako, Japan
K. Oyamada
SHI Accelerator Service Ltd., Tokyo, Japan

Upgrades of the RIKEN heavy-ion linac (RILAC) involving a new superconducting linac (SRILAC) are undergoing to promote super-heavy element searches at the RIKEN radioactive isotope beam factory (RIBF). Stable ultra-high vacuum (<10^-8 Pa) and particulate-free conditions are strictly necessary for keeping the performance of the superconductive radio frequency (SRF) cavities of the SRILAC. It is crucially important to develop neighboring warm sections to prevent contamination from the existing old RILAC and beamlines built almost four decades ago. In the present study, non-evaporative getter-based differential pumping systems were newly developed to achieve the pressure reduction from the existing beamline vacuum (10^-5–10^-6 Pa ) to the ultra-high vacuum within very limited length (<80 cm) ensuring the large beam aperture of more than 40 mm. They are also equipped with compact electrostatic particle removers. We will describe and discuss details of the design, construction and performance of the system.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP013

About •

paper received ※ 03 July 2019 paper accepted ※ 14 August 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)