Author: He, F.S.
Paper Title Page
MOFAB4
 Overview and SRF Requirements of the CiADS Project  
 
  • Y. He, Q. Chen, Z. Gao, H. Guo, G. Huang, Y.L. Huang, T.C. Jiang, C.L. Li, S.H. Liu, T. Tan, Y.Q. Wan, F.F. Wang, J.Q. Wu, W.M. Yue, B. Zhang, J.H. Zhang, S.H. Zhang, S.X. Zhang
    IMP/CAS, Lanzhou, People’s Republic of China
  • J.P. Dai, F.S. He, Z.Q. Li, W.M. Pan
    IHEP, Beijing, People’s Republic of China
  • T.C. Jiang
    University of Chinese Academy of Sciences, Beijing, People’s Republic of China
  
  Chinese initiative Accelerator Driven System started constructing in 2018. It consists a superconducting linac with 500 MeV and 5 mA; an LEB coolant fast reactor with 7.5 MW. The first beam coupling with reactor will be in 2024. The sc linac employed 5 families of superconducting resonators, two types of HWRs (β=0.1 and β=0.19), one type of double spokes (β=0.42) and two types of ellipticals (β=0.62 and β=0.82). The whole system will operate in 2 K. A space has been reserved for future upgrading to 1 GeV. As a demo of front-end of ADS, the CAFe (China ADS Front-end demo linac) has been developed and commissioned to verify the SRF techniques, high power CW beam and RAMI. 45 kW proton beam has been delivered to the dump and lasted more than 100 hours at the beginning of 2019. According to the operation experience, the challenge is the stability and performance of cavities under the heavy beam loading, some phenomenas have been observed. Up to now, the design of bulk Nb cavities have been finished and the prototype fabrication is on going. The techniques of Nb/Cu cavity and Nb3Sn are also developed in IMP for the future project of ADS.  
slides icon Slides MOFAB4 [12.465 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOP049 Prototypes Fabrication of 1.3 GHz Superconducting Rf Components for SHINE 164
 
  • H.T. Hou, J.F. Chen, Z.Y. Ma, J. Shi, Y. Wang
    SARI-CAS, Pudong, Shanghai, People’s Republic of China
  • F.S. He
    IHEP, Beijing, People’s Republic of China
  • S.W. Quan
    PKU, Beijing, People’s Republic of China
  
  Aiming to high repetition rate hard X-ray facility, con-struction of Shanghai HIgh repetition rate XFEL aNd Extreme light facility (SHINE) project has been ap-proved. During the R & D phase, prototypes fabrication of key components of 1.3GHz superconducting rf system have been proposed, especially 1.3 GHz 9-cell niobium cavities. Here the paper will present the progress of the fabrication status and performance of the prototypes, together with the analysis of not only the quality factor and gradient of the cavities. Consideration of HOM feed-throughs and absorbers are also reported.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP049  
About • paper received ※ 23 June 2019       paper accepted ※ 30 June 2019       issue date ※ 14 August 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP089 Development of Superconducting RF Double Spoke Cavity at IHEP 1114
SUSP010   use link to see paper's listing under its alternate paper code  
 
  • Q. Zhou, F.S. He, W.M. Pan
    IHEP, Beijing, People’s Republic of China
  
  The China Spallation Neutron Source (CSNS) is de-signed to produce spallation neutrons. CSNS upgrade is planned to increase beam power by inserting a SRF linac after drift tube linac (DTL). IHEP is developing a 325MHz double spoke cavity at ¿0 of 0.5 for the CSNS SRF linac. The cavity shape was optimized to minimize Ep/Ea while keeping Bp/Ep reasonably low. Meanwhile, mechanical design was applied to check stress, Lorentz force detuning and microphonic effects, and to minimize pressure sensitivity. A new RF coupling scheme was pro-posed to avoid electrons hitting directly on ceramic win-dow. After fabrication and post processing of cavity, the cavity reached Bp of 120mT at Eacc = 13.8MV/m and Q0 = 1.72·1010 under vertical test at 2K.  
poster icon Poster THP089 [2.176 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP089  
About • paper received ※ 22 June 2019       paper accepted ※ 30 June 2019       issue date ※ 14 August 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
FRCAA5
 SRF Activities and Progress at IHEP  
 
  • F.S. He, F. Bing, J. Dai, C. Dong, T.M. Huang, S. Jin, D.B. Li, Z.Q. Li, H.Y. Lin, B.Q. Liu, Z.C. Liu, Q. Ma, F. Meng, Z.H. Mi, W.M. Pan, P. Sha, Q.Y. Wang, L.G. Xiao, F.Y. Yang, J.Y. Zhai, P. Zhang, X.Y. Zhang, H.J. Zheng, Q. Zhou
    IHEP, Beijing, People’s Republic of China
  
  There are several active SRF projects at IHEP, including HEPS, CEPC, CSNS upgrade, SHINE and PAPS SRF facility. Four cryomodules with 166.6 MHz β=1 QWR cavities are proposed for HEPS, while each cavity will providing 1.2 MV and 145 kW to the electron beam. The vertical and horizotal tests of the proof-of-principle cavities were recently conducted. 650 MHz 2-cell cavities and 1.3 GHz 9-cell cavities were proposed for the CEPC, and high Q technology is adopted by the project. Infrastructures are developed for the high Q study, while R&D on single-cell cavities are under-way. Efforts on learning mass-production of cavities and cavity-string were also made for both CEPC and SHINE projects. SRF linac from 80 MeV to over 300 MeV were adopted for the upgrade of CSNS, with 325 MHz Double-spoke cavities at β=0.50 and 650 MHz-5cell elliptical cavities at β=0.65. The PAPS SRF facility is biased on mass production for large SRF projects, i.e. aiming at assembly and testing of 200-400 cavities & couplers and 20 cryomodules per year. The equipment installation and commissioning is on going. The activities and progress of these SRF projects with be addressed in this presentation.  
slides icon Slides FRCAA5 [13.318 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)