SRF2017 - List of Keywords (coupling)

Paper	Title	Other Keywords	Page
MOPB069	Design of the High Power Input Coupler for CEPC Main Ring Cavity *	ion, cavity, vacuum, cryogenics	216
	T.M. Huang, Q. Ma, J.Y. Zhai IHEP, Beijing, People's Republic of China K.X. Gu Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People's Republic of China
	The main ring cavities of CEPC project are two-cell el-liptical superconducting cavities operating at 650 MHz in CW mode. Each cavity equips with one high power input coupler and each coupler has to deliver at least 300 kW of CW RF power to the beam. A variable coupling from 10⁵ to 2·10⁶ is required to meet different operation modes. Considering the cavities working with high quali-ty factor up to 2·10¹⁰, the coupler assembled with cavity in class 10 clean room is strongly recommended to protect the cavity from contamination. Also, low cryogenic heat loss is one of the important issues for a large scale CW operation machine. Some of the above requirements should be compromise. Therefore, it's a big challenge to design a high power input coupler fulfilling the above requirements simultaneously. A new coupler that employs 75 Ω coaxial line sections, a planar ceramic disk win-dow, a coaxial to waveguide transition and a coupling adjusting actuator has been designed. In this paper, the RF design, thermal stress analysis and preliminary me-chanical design of the coupler are presented.
	Poster MOPB069 [0.735 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-MOPB069
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPB078	Power Coupler Design for the LUCRECE Project	ion, simulation, radiation, cavity	245
	H. Guler, D. Auguste, J. Bonis, O. Bouras, M. El Khaldi, W. Kaabi LAL, Orsay, France
	The LUCRECE project aims at developing an elementary RF system (cavity, power source, LLRF and controls) suitable for continuous (CW) operation at 1.3 GHz. This effort is made in the framework of the advanced and compact FEL project LUNEX5 (free electron Laser Using a New accelerator for the Exploitation of X-ray radiation of 5th generation), using superconducting linac technology for high repetition rate and multi-user operation (http://www.lunex5.com). In this context, based on its large experience on coupler design and RF conditioning, LAL Laboratory is in charge of the design and the fabrication of RF couplers that could operate at up to 15-20 kW in CW mode. For this purpose, couplers based on CORNELL 65kW CW couplers (RF power couplers for the Cornell ERL injector) are under consideration and will be adapted to the LUCRECE needs. Electromagnetic simulations and associated thermal heating will be discussed. Methods to decrease the thermal impact will be considered.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-MOPB078
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPB070	INFN-LASA Cavity Design for PIP-II LB650 Cavity	cavity, ion, HOM, operation	547
	C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy M. Bertucci, A. Bignami, A. Bosotti, J.F. Chen, P. Michelato, L. Monaco, R. Paparella, D. Sertore INFN/LASA, Segrate (MI), Italy S. Pirani ESS, Lund, Sweden
	INFN-LASA is going to join the international partnership for Fermilab PIP-II project and to provide a novel design for the 650 MHz cavity of the 0.61 beta linac section, plug compatible with the Fermilab Cryomodule design. This paper reports the cavity design features both from the electro-magnetic and mechanical aspects, with focus on the rationales at the basis of the choice of main parameters. Furthermore, the current plans for the future R&D activity are here reported, including the production of two single cells and two complete cavities.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-TUPB070
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOPB069

Design of the High Power Input Coupler for CEPC Main Ring Cavity *

ion, cavity, vacuum, cryogenics

216

T.M. Huang, Q. Ma, J.Y. Zhai
IHEP, Beijing, People's Republic of China
K.X. Gu
Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People's Republic of China

The main ring cavities of CEPC project are two-cell el-liptical superconducting cavities operating at 650 MHz in CW mode. Each cavity equips with one high power input coupler and each coupler has to deliver at least 300 kW of CW RF power to the beam. A variable coupling from 10⁵ to 2·10⁶ is required to meet different operation modes. Considering the cavities working with high quali-ty factor up to 2·10¹⁰, the coupler assembled with cavity in class 10 clean room is strongly recommended to protect the cavity from contamination. Also, low cryogenic heat loss is one of the important issues for a large scale CW operation machine. Some of the above requirements should be compromise. Therefore, it's a big challenge to design a high power input coupler fulfilling the above requirements simultaneously. A new coupler that employs 75 Ω coaxial line sections, a planar ceramic disk win-dow, a coaxial to waveguide transition and a coupling adjusting actuator has been designed. In this paper, the RF design, thermal stress analysis and preliminary me-chanical design of the coupler are presented.

Poster MOPB069 [0.735 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-MOPB069

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPB078

Power Coupler Design for the LUCRECE Project

ion, simulation, radiation, cavity

245

H. Guler, D. Auguste, J. Bonis, O. Bouras, M. El Khaldi, W. Kaabi
LAL, Orsay, France

The LUCRECE project aims at developing an elementary RF system (cavity, power source, LLRF and controls) suitable for continuous (CW) operation at 1.3 GHz. This effort is made in the framework of the advanced and compact FEL project LUNEX5 (free electron Laser Using a New accelerator for the Exploitation of X-ray radiation of 5th generation), using superconducting linac technology for high repetition rate and multi-user operation (http://www.lunex5.com). In this context, based on its large experience on coupler design and RF conditioning, LAL Laboratory is in charge of the design and the fabrication of RF couplers that could operate at up to 15-20 kW in CW mode. For this purpose, couplers based on CORNELL 65kW CW couplers (RF power couplers for the Cornell ERL injector) are under consideration and will be adapted to the LUCRECE needs. Electromagnetic simulations and associated thermal heating will be discussed. Methods to decrease the thermal impact will be considered.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-MOPB078

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPB070

INFN-LASA Cavity Design for PIP-II LB650 Cavity

cavity, ion, HOM, operation

547

C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy
M. Bertucci, A. Bignami, A. Bosotti, J.F. Chen, P. Michelato, L. Monaco, R. Paparella, D. Sertore
INFN/LASA, Segrate (MI), Italy
S. Pirani
ESS, Lund, Sweden

INFN-LASA is going to join the international partnership for Fermilab PIP-II project and to provide a novel design for the 650 MHz cavity of the 0.61 beta linac section, plug compatible with the Fermilab Cryomodule design. This paper reports the cavity design features both from the electro-magnetic and mechanical aspects, with focus on the rationales at the basis of the choice of main parameters. Furthermore, the current plans for the future R&D activity are here reported, including the production of two single cells and two complete cavities.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-TUPB070

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)