SRF2013 - List of Authors (Pan, W.M.)

Paper

Title

Page

SRF Cavities for ADS Project in China

868

Y. He, W.M. Yue, S.H. Zhang
IMP, Lanzhou, People's Republic of China
J.P. Dai, Z.Q. Li, Z.C. Liu, W.M. Pan
IHEP, Beijing, People's Republic of China
X.Y. Lu
PKU, Beijing, People's Republic of China

The driver linac for ADS project in China is full superconducting downstream of Radio Frequecy Quadrupole Accelerator. It is a key technology R&D stage of the project from 2011 to 2015. Superconducting HWR, Spoke, and elliptical cavities are all involved in the project. The prototypes of 162.5 MHz HWR010, 325 MHz Spoke012, 325 MHz Spoke021, 325 MHz Spoke040, and 650 MHz elliptical 063 are being developed at IMP and IHEP in China. A small number of HWR010 and Spoke012 have been produced and vertically tested. The first prototype of Spoke021 were tested too. The design, performances, fabrication, suface processing, and testing of all cavities will be presented in the talk. The design improvement of the cavities in the future will also be discussed.

Slides THIOD01 [13.465 MB]

THP021

Design of the SSR021 Cavity for the Proton Accelerator Main Linac of China ADS

939

Z.Q. Li, Y.L. Chi, Q. Ma, W.M. Pan, Y. Sun, J.Y. Tang, Q.Y. Wang, B. Xu, X.Y. Zhang
IHEP, Beijing, People's Republic of China
Y. He, C. Zhang, S.H. Zhang, S.X. Zhang
IMP, Lanzhou, People's Republic of China
H.Y. Lin, P. Sha
Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People's Republic of China

China ADS is a high intensity proton machine based on CW superconducting technology. It includes two injectors and one main linac. The Institute of High Energy Physics (IHEP) and the Institute of Modern Physics (IMP) of the Chinese Academy of Sciences (CAS), are responsible for developing the main linac together. This paper introduces the physics and mechanical design of the single spoke resonator (SSR021, beta021 cavity), which is used for first section of the main linac.

THP022

DEVELOPMENT OF A VERY LOW BETA SUPERCONDUCTING SINGLE SPOKE CAVITY FOR CHINA-ADS LINAC*

942

H. Li, J.P. Dai, L.H. Li, H.Y. Lin, Q. Ma, W.M. Pan, Y. Sun, Q.Y. Wang, J. Zhang
IHEP, Beijing, People's Republic of China
H. Huang, P. Sha
Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People's Republic of China

Twelve very low Beta superconducting single spoke cavities whose Beta is only 0.12 (Spoke012) operating at 325MHz, are adopted in Injector I for China-ADS linac. This type of spoke cavity is believed to be one of the key challenges for its very low geometric Beta. So far, collaborated with Peking University and Harbin Institute of Technology, IHEP has designed, fabricated and tested the spoke012 prototype cavity successfully. This paper presents the details of the design, fabrication and vertical test results for Spoke012 prototype cavity.

THP028

The Research on Spoke 0.40 Cavity

959

P. Sha, H. Huang
Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People's Republic of China
W.M. Pan, X.Y. Zhang
IHEP, Beijing, People's Republic of China

Spoke superconducting cavity can be used in the low-energy section of the proton accelerator. It has many significant advantages: compact structure, high value of R/Q, etc. The Chinese ADS (Accelerator Driven System) project will adopt many spoke cavities with 3 different β values (0.12, 0.21, 0.40). Spoke040 cavities (β=0.40) are used to increase the proton energy from 34 MeV to 178 MeV. Now the physical design of spoke040 cavity has been finished, and the machining are going on right now. The vertical test would be held at the end of this year.

THP050

Development of Power Coupler for Superconducting Spoke Cavities for China ADS Proton Linac

1024

X. Chen, T.M. Huang, H.Y. Lin, Q. Ma, F. Meng, W.M. Pan, Y.H. Peng
IHEP, Beijing, People's Republic of China

Abstract: The China-ADS proton linac adopts β=0.12 superconducting Spoke cavities. Each cavity is powered via a 325MHz coaxial power coupler. The coupler is to feed 6kW maximum power though it is designed to handle at 15kW .Two coupler sets have been made by IHEP so far, and a 10kW RF power in continuous travelling wave mode has passed through the coupler during high power test in late January 2013. An introduction of this coupler design and the room temperature test results are presented in this paper.

Paper	Title	Page
THIOD01	SRF Cavities for ADS Project in China	868
	Y. He, W.M. Yue, S.H. Zhang IMP, Lanzhou, People's Republic of China J.P. Dai, Z.Q. Li, Z.C. Liu, W.M. Pan IHEP, Beijing, People's Republic of China X.Y. Lu PKU, Beijing, People's Republic of China
	The driver linac for ADS project in China is full superconducting downstream of Radio Frequecy Quadrupole Accelerator. It is a key technology R&D stage of the project from 2011 to 2015. Superconducting HWR, Spoke, and elliptical cavities are all involved in the project. The prototypes of 162.5 MHz HWR010, 325 MHz Spoke012, 325 MHz Spoke021, 325 MHz Spoke040, and 650 MHz elliptical 063 are being developed at IMP and IHEP in China. A small number of HWR010 and Spoke012 have been produced and vertically tested. The first prototype of Spoke021 were tested too. The design, performances, fabrication, suface processing, and testing of all cavities will be presented in the talk. The design improvement of the cavities in the future will also be discussed.
	Slides THIOD01 [13.465 MB]

THP021	Design of the SSR021 Cavity for the Proton Accelerator Main Linac of China ADS	939
	Z.Q. Li, Y.L. Chi, Q. Ma, W.M. Pan, Y. Sun, J.Y. Tang, Q.Y. Wang, B. Xu, X.Y. Zhang IHEP, Beijing, People's Republic of China Y. He, C. Zhang, S.H. Zhang, S.X. Zhang IMP, Lanzhou, People's Republic of China H.Y. Lin, P. Sha Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People's Republic of China
	China ADS is a high intensity proton machine based on CW superconducting technology. It includes two injectors and one main linac. The Institute of High Energy Physics (IHEP) and the Institute of Modern Physics (IMP) of the Chinese Academy of Sciences (CAS), are responsible for developing the main linac together. This paper introduces the physics and mechanical design of the single spoke resonator (SSR021, beta021 cavity), which is used for first section of the main linac.

THP022	DEVELOPMENT OF A VERY LOW BETA SUPERCONDUCTING SINGLE SPOKE CAVITY FOR CHINA-ADS LINAC*	942
	H. Li, J.P. Dai, L.H. Li, H.Y. Lin, Q. Ma, W.M. Pan, Y. Sun, Q.Y. Wang, J. Zhang IHEP, Beijing, People's Republic of China H. Huang, P. Sha Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People's Republic of China
	Twelve very low Beta superconducting single spoke cavities whose Beta is only 0.12 (Spoke012) operating at 325MHz, are adopted in Injector I for China-ADS linac. This type of spoke cavity is believed to be one of the key challenges for its very low geometric Beta. So far, collaborated with Peking University and Harbin Institute of Technology, IHEP has designed, fabricated and tested the spoke012 prototype cavity successfully. This paper presents the details of the design, fabrication and vertical test results for Spoke012 prototype cavity.

THP028	The Research on Spoke 0.40 Cavity	959
	P. Sha, H. Huang Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People's Republic of China W.M. Pan, X.Y. Zhang IHEP, Beijing, People's Republic of China
	Spoke superconducting cavity can be used in the low-energy section of the proton accelerator. It has many significant advantages: compact structure, high value of R/Q, etc. The Chinese ADS (Accelerator Driven System) project will adopt many spoke cavities with 3 different β values (0.12, 0.21, 0.40). Spoke040 cavities (β=0.40) are used to increase the proton energy from 34 MeV to 178 MeV. Now the physical design of spoke040 cavity has been finished, and the machining are going on right now. The vertical test would be held at the end of this year.

THP050	Development of Power Coupler for Superconducting Spoke Cavities for China ADS Proton Linac	1024
	X. Chen, T.M. Huang, H.Y. Lin, Q. Ma, F. Meng, W.M. Pan, Y.H. Peng IHEP, Beijing, People's Republic of China
	Abstract: The China-ADS proton linac adopts β=0.12 superconducting Spoke cavities. Each cavity is powered via a 325MHz coaxial power coupler. The coupler is to feed 6kW maximum power though it is designed to handle at 15kW .Two coupler sets have been made by IHEP so far, and a 10kW RF power in continuous travelling wave mode has passed through the coupler during high power test in late January 2013. An introduction of this coupler design and the room temperature test results are presented in this paper.