RuPAC2021 - List of Authors (Yurevich, S.V.)

Paper	Title	Page
MOPSA16	Design and Characteristics of Cryostat for Testing of Low-Beta 325 MHz Half-Wave Resonators	165
	D. Bychanok, V. Bayev, S. Huseu, S.A. Maksimenko, A.E. Sukhotski, E. Vasilevich INP BSU, Minsk, Belarus A.V. Butenko, D. Nikiforov, E. Syresin JINR, Dubna, Moscow Region, Russia M. Gusarova, M.V. Lalayan, S.M. Polozov MEPhI, Moscow, Russia V.S. Petrakovsky, A.I. Pokrovsky, A. Shvedov, S.V. Yurevich Physical-Technical Institute of the National Academy of Sciences of Belarus, Minsk, Belarus
	Design of the prototype cryomodule for testing low-beta 325 MHz half-wave cavities is currently undergoing at INP BSU. The cryomodule allows performing intermediate vacuum-, temperature-, and rf-tests during the fabrication of half-wave resonators. The first experimental results of cryomodule cooling down to liquid nitrogen temperatures are presented and discussed. The pressure and temperature control allow us to estimate the main cooling/heating characteristics of the cryostat at different operation stages. The presented test cryomodule will be used for further development and production of superconductive niobium cavities for the Nuclotron-based Ion Collider fAcility (NICA) injector.
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA16
About •	Received ※ 16 September 2021 — Revised ※ 18 September 2021 — Accepted ※ 23 September 2021 — Issued ※ 26 September 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THA01	Status of the SC HWR Cavities Production for NICA Project	85
	M. Gusarova, M.V. Lalayan, S.V. Matsievskiy, R.E. Nemchenko, S.M. Polozov, V.L. Shatokhin, N.P. Sobenin MEPhI, Moscow, Russia A.V. Butenko, M.V. Lalayan, E. Syresin, G.V. Trubnikov JINR, Dubna, Moscow Region, Russia D. Bychanok, S.A. Maksimenko INP BSU, Minsk, Belarus V.S. Petrakovsky, I.L. Pobol, A.I. Pokrovsky, A. Shvedov, S.V. Yurevich, V.G. Zaleski Physical-Technical Institute of the National Academy of Sciences of Belarus, Minsk, Belarus G.V. Trubnikov JINR/VBLHEP, Dubna, Moscow region, Russia
	Since 2015 the superconducting (SC) linac-injector development for Nuclotron NICA (JINR, Dubna, Russia) is carried out by the collaboration of JINR, NRNU MEPhI, INP BSU, PTI NASB. This new SC linac is to accelerate protons up to 20 MeV and light ions to 7.5 MeV/u with possible energy upgrade up to 50 MeV for proton beam. This paper reports the current status of the development and manufacturing of superconducting accelerating cavities for a new linear accelerator of the injection complex of the Nuclotron-NICA project.
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-THA01
About •	Received ※ 26 September 2021 — Revised ※ 27 September 2021 — Accepted ※ 09 October 2021 — Issued ※ 24 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design and Characteristics of Cryostat for Testing of Low-Beta 325 MHz Half-Wave Resonators

165

D. Bychanok, V. Bayev, S. Huseu, S.A. Maksimenko, A.E. Sukhotski, E. Vasilevich
INP BSU, Minsk, Belarus
A.V. Butenko, D. Nikiforov, E. Syresin
JINR, Dubna, Moscow Region, Russia
M. Gusarova, M.V. Lalayan, S.M. Polozov
MEPhI, Moscow, Russia
V.S. Petrakovsky, A.I. Pokrovsky, A. Shvedov, S.V. Yurevich
Physical-Technical Institute of the National Academy of Sciences of Belarus, Minsk, Belarus

Design of the prototype cryomodule for testing low-beta 325 MHz half-wave cavities is currently undergoing at INP BSU. The cryomodule allows performing intermediate vacuum-, temperature-, and rf-tests during the fabrication of half-wave resonators. The first experimental results of cryomodule cooling down to liquid nitrogen temperatures are presented and discussed. The pressure and temperature control allow us to estimate the main cooling/heating characteristics of the cryostat at different operation stages. The presented test cryomodule will be used for further development and production of superconductive niobium cavities for the Nuclotron-based Ion Collider fAcility (NICA) injector.

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA16

About •

Received ※ 16 September 2021 — Revised ※ 18 September 2021 — Accepted ※ 23 September 2021 — Issued ※ 26 September 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THA01

Status of the SC HWR Cavities Production for NICA Project

85

M. Gusarova, M.V. Lalayan, S.V. Matsievskiy, R.E. Nemchenko, S.M. Polozov, V.L. Shatokhin, N.P. Sobenin
MEPhI, Moscow, Russia
A.V. Butenko, M.V. Lalayan, E. Syresin, G.V. Trubnikov
JINR, Dubna, Moscow Region, Russia
D. Bychanok, S.A. Maksimenko
INP BSU, Minsk, Belarus
V.S. Petrakovsky, I.L. Pobol, A.I. Pokrovsky, A. Shvedov, S.V. Yurevich, V.G. Zaleski
Physical-Technical Institute of the National Academy of Sciences of Belarus, Minsk, Belarus
G.V. Trubnikov
JINR/VBLHEP, Dubna, Moscow region, Russia

Since 2015 the superconducting (SC) linac-injector development for Nuclotron NICA (JINR, Dubna, Russia) is carried out by the collaboration of JINR, NRNU MEPhI, INP BSU, PTI NASB. This new SC linac is to accelerate protons up to 20 MeV and light ions to 7.5 MeV/u with possible energy upgrade up to 50 MeV for proton beam. This paper reports the current status of the development and manufacturing of superconducting accelerating cavities for a new linear accelerator of the injection complex of the Nuclotron-NICA project.

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-THA01

About •

Received ※ 26 September 2021 — Revised ※ 27 September 2021 — Accepted ※ 09 October 2021 — Issued ※ 24 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)