RuPAC2021 - List of Authors (Samofalova, Y.A.)

Paper	Title	Page
MOB02	Linear Electron Accelerator LINAC-200, Status of Work and Prospects
	V.V. Kobets, M. Gostkin, M.A. Nozdrin, Y.A. Samofalova, G. Shirkov, A. Trifonov, K. Yunenko, A. Zhemchugov JINR, Dubna, Moscow Region, Russia A.E. Brukva JINR/DLNP, Dubna, Moscow region, Russia V. Shabratov JINR/VBLHEP, Moscow, Russia
	The LINAC-200 linear electron accelerator is created on the basis of the MEA accelerator transported to JINR from NIKHEF (Netherlands) In August 2017, the physical launch of the LINAC-200 facility (the first stage of the LINAC-800 facility) with an electron energy of 220 MeV was carried out. The accelerator operates in a pulsed mode. The duration of the current pulse is 0.1 - 3.0 mcs, the amplitude is from 40 mA to single electrons. The energy of electrons can be smoothly changed within the range of 30 - 200 MeV. This makes it possible to use the accelerator for testing detectors, as well as for studies of the radiation resistance of materials and other works.
	Slides MOB02 [8.073 MB]
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPSB44	Design and Simulation of an S-Band RF Photogun for a New Injector of the Accelerator Linac-200 at JINR	322
	Y.A. Samofalova, V.V. Kobets, M.A. Nozdrin, A. Zhemchugov JINR, Dubna, Moscow Region, Russia A.M. Barnyakov BINP SB RAS, Novosibirsk, Russia
	A new 2.856 GHz S-band RF photogun for the generation of ultrashort electron beams at the LINAC-200 accelerator at JINR is simulated. The beam parameters at the photogun output are determined to meet the requirements of the LINAC-200 injection. The general design of the photogun is presented. The electrodynamic parameters are determined and the accelerating field distribution is calculated. The particle dynamics is simulated and analyzed to obtain the required beam properties.
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-TUPSB44
About •	Received ※ 29 September 2021 — Revised ※ 01 October 2021 — Accepted ※ 09 October 2021 — Issued ※ 17 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

MOB02

Linear Electron Accelerator LINAC-200, Status of Work and Prospects

V.V. Kobets, M. Gostkin, M.A. Nozdrin, Y.A. Samofalova, G. Shirkov, A. Trifonov, K. Yunenko, A. Zhemchugov
JINR, Dubna, Moscow Region, Russia
A.E. Brukva
JINR/DLNP, Dubna, Moscow region, Russia
V. Shabratov
JINR/VBLHEP, Moscow, Russia

The LINAC-200 linear electron accelerator is created on the basis of the MEA accelerator transported to JINR from NIKHEF (Netherlands) In August 2017, the physical launch of the LINAC-200 facility (the first stage of the LINAC-800 facility) with an electron energy of 220 MeV was carried out. The accelerator operates in a pulsed mode. The duration of the current pulse is 0.1 - 3.0 mcs, the amplitude is from 40 mA to single electrons. The energy of electrons can be smoothly changed within the range of 30 - 200 MeV. This makes it possible to use the accelerator for testing detectors, as well as for studies of the radiation resistance of materials and other works.

Slides MOB02 [8.073 MB]

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPSB44

Design and Simulation of an S-Band RF Photogun for a New Injector of the Accelerator Linac-200 at JINR

322

Y.A. Samofalova, V.V. Kobets, M.A. Nozdrin, A. Zhemchugov
JINR, Dubna, Moscow Region, Russia
A.M. Barnyakov
BINP SB RAS, Novosibirsk, Russia

A new 2.856 GHz S-band RF photogun for the generation of ultrashort electron beams at the LINAC-200 accelerator at JINR is simulated. The beam parameters at the photogun output are determined to meet the requirements of the LINAC-200 injection. The general design of the photogun is presented. The electrodynamic parameters are determined and the accelerating field distribution is calculated. The particle dynamics is simulated and analyzed to obtain the required beam properties.

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-TUPSB44

About •

Received ※ 29 September 2021 — Revised ※ 01 October 2021 — Accepted ※ 09 October 2021 — Issued ※ 17 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)