RuPAC2021 - List of Authors (Lalayan, M.V.)

Paper	Title	Page
THA01	Status of the SC HWR Cavities Production for NICA Project	85
	M. Gusarova, M.V. Lalayan, S.V. Matsievskiy, R.E. Nemchenko, S.M. Polozov, V.L. Shatokhin, N.P. Sobenin MEPhI, Moscow, Russia A.V. Butenko, M.V. Lalayan, E. Syresin, G.V. Trubnikov JINR, Dubna, Moscow Region, Russia D. Bychanok, S.A. Maksimenko INP BSU, Minsk, Belarus V.S. Petrakovsky, I.L. Pobol, A.I. Pokrovsky, A. Shvedov, S.V. Yurevich, V.G. Zaleski Physical-Technical Institute of the National Academy of Sciences of Belarus, Minsk, Belarus G.V. Trubnikov JINR/VBLHEP, Dubna, Moscow region, Russia
	Since 2015 the superconducting (SC) linac-injector development for Nuclotron NICA (JINR, Dubna, Russia) is carried out by the collaboration of JINR, NRNU MEPhI, INP BSU, PTI NASB. This new SC linac is to accelerate protons up to 20 MeV and light ions to 7.5 MeV/u with possible energy upgrade up to 50 MeV for proton beam. This paper reports the current status of the development and manufacturing of superconducting accelerating cavities for a new linear accelerator of the injection complex of the Nuclotron-NICA project.
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-THA01
About •	Received ※ 26 September 2021 — Revised ※ 27 September 2021 — Accepted ※ 09 October 2021 — Issued ※ 24 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPSA16	Design and Characteristics of Cryostat for Testing of Low-Beta 325 MHz Half-Wave Resonators	165
	D. Bychanok, V. Bayev, S. Huseu, S.A. Maksimenko, A.E. Sukhotski, E. Vasilevich INP BSU, Minsk, Belarus A.V. Butenko, D. Nikiforov, E. Syresin JINR, Dubna, Moscow Region, Russia M. Gusarova, M.V. Lalayan, S.M. Polozov MEPhI, Moscow, Russia V.S. Petrakovsky, A.I. Pokrovsky, A. Shvedov, S.V. Yurevich Physical-Technical Institute of the National Academy of Sciences of Belarus, Minsk, Belarus
	Design of the prototype cryomodule for testing low-beta 325 MHz half-wave cavities is currently undergoing at INP BSU. The cryomodule allows performing intermediate vacuum-, temperature-, and rf-tests during the fabrication of half-wave resonators. The first experimental results of cryomodule cooling down to liquid nitrogen temperatures are presented and discussed. The pressure and temperature control allow us to estimate the main cooling/heating characteristics of the cryostat at different operation stages. The presented test cryomodule will be used for further development and production of superconductive niobium cavities for the Nuclotron-based Ion Collider fAcility (NICA) injector.
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA16
About •	Received ※ 16 September 2021 — Revised ※ 18 September 2021 — Accepted ※ 23 September 2021 — Issued ※ 26 September 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPSA42	Compact S-Band Accelerating Structure for Medical Applications	186
	M.V. Lalayan, A. Batov, M. Gusarova, S.M. Polozov, R.A. Zbruev MEPhI, Moscow, Russia
	This paper describes electromagnetic design results for the compact 6.3 MeV electron linac for the radiation therapy facility. Linac is based on S-band biperiodic accelerating structure with inner coupling cells with an increased coupling coefficient.
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA42
About •	Received ※ 01 October 2021 — Revised ※ 02 October 2021 — Accepted ※ 09 October 2021 — Issued ※ 11 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUB07	The Conceptual Design of the 7.5 MeV/u Light Ion Injector	51
	S.M. Polozov, A.E. Aksentyev, M.M. Bulgacheva, O.V. Deryabochkin, M.S. Dmitriyev, V.V. Dmitriyeva, M.V. Dyakonov, V.S. Dyubkov, A.V. Gerasimenko, A.A. Gorchakov, M. Gusarova, M.A. Guzov, E.N. Indiushnii, A.M. Korshunov, K.I. Kozlovskiy, A.S. Krasnov, M.V. Lalayan, Y. Lozeev, T.A. Lozeeva, A.I. Makarov, S.V. Matsievskiy, A.P. Melekhov, O.V. Murygin, R.E. Nemchenko, G.G. Novikov, A.E. Novozhilov, A.S. Panishev, V.N. Pashentsev, A.G. Ponomarenko, A.V. Prokopenko, V.I. Rashchikov, A.V. Samoshin, A.A. Savchik, V.L. Shatokhin, A.E. Shikanov, K.D. Smirnov, G.A. Tsarev, S.A. Tumanov, I.A. Yurin, M.I. Zhigailova MEPhI, Moscow, Russia M.L. Smetanin, A.V. Telnov VNIIEF, Sarov, Russia N.V. Zavyalov RFNC-VNIIEF, Sarov, Nizhniy Novgorod region, Russia
	The new linac for light ion beam injection is under development at MEPhI. Such linac was proposed for acceleration of 7.5 MeV/u ion beam with A/Z=1-3 and current up to 5 mA for proton and 0.4 pmA for light ions. The linac general layout will include two types of ion sources: ECR ion source for proton anf He ions and laser ion source for ions form Li to O. Following the LEBT ions will be bunched and accelerated to the final energy using RFQ section and 14 IH cavities. These IH-cavities will be identical (divided into two groups) and independently phased. All cavities will operate on 81 MHz. Results of the beam dynamics simulations and the cavities design will presented in the report.
	Slides TUB07 [5.210 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-TUB07
About •	Received ※ 16 September 2021 — Revised ※ 25 September 2021 — Accepted ※ 27 September 2021 — Issued ※ 14 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPSC03	Multipactor Discharge in Short 5-Gap 80 MHz IH Structures	343
	M.M. Bulgacheva, M. Gusarova, M.V. Lalayan MEPhI, Moscow, Russia
	The results of numerical simulations of multipacting discharge in accelerating Interdigital H-type (IH) cavities are presented in this paper. Optimal design parameters were selected to reduce the number of multipactor electrons. The localization of multipactor trajectories in the short 5-gap 80 MHz IH cavities at various levels of accelerating voltage is considered.
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-WEPSC03
About •	Received ※ 26 September 2021 — Revised ※ 27 September 2021 — Accepted ※ 09 October 2021 — Issued ※ 17 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPSC12	Preliminary Calculation of the Power Coupler for the SYLA Storage Ring RF Cavity	364
	S.V. Matsievskiy, M. Gusarova, M.V. Lalayan, Ya.V. Shashkov MEPhI, Moscow, Russia
	Several new accelerator facilities will be built in Russia in the next few years. One of those facilities is a 6 GeV storage ring light source, the Ultimate Source of Synchrotron Radiation to be built in Protvino, near Moscow. This paper considers storage ring RF cavity power coupler design issues and provides preliminary calculations of the device.
	Poster WEPSC12 [0.741 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-WEPSC12
About •	Received ※ 08 September 2021 — Accepted ※ 27 September 2021 — Issued ※ 22 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPSC13	Accelerating Cavities with HOM Damping for USSR-4 Storage Ring	367
	Ya.V. Shashkov, M. Gusarova, M.V. Lalayan, N.Yu. Samarokov MEPhI, Moscow, Russia M. Gusarova NRC, Moscow, Russia
	Preliminary results on accelerating cavities for USSR-4 facility (also known as SYLA - SYnchrotron and free-electron LAser) project are presented. This facility is under development by collaboration hosted by National Research Center "Kurchatov Institute". SYLA is synchro-tron radiation facility based on injector linac and 6 GeV storage ring. Beam energy loss in storage ring is to be compensated by several modified pillbox cavities. Cavity geometry features, its operation frequency choice and induced HOM parameters are discussed. HOM damping technique using corrugated cylindrical waveguides were studied. Longitudinal impedance values of HOM are presented for initial accelerating cavity and structure with waveguides.
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-WEPSC13
About •	Received ※ 18 September 2021 — Revised ※ 30 September 2021 — Accepted ※ 09 October 2021 — Issued ※ 21 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Status of the SC HWR Cavities Production for NICA Project

85

M. Gusarova, M.V. Lalayan, S.V. Matsievskiy, R.E. Nemchenko, S.M. Polozov, V.L. Shatokhin, N.P. Sobenin
MEPhI, Moscow, Russia
A.V. Butenko, M.V. Lalayan, E. Syresin, G.V. Trubnikov
JINR, Dubna, Moscow Region, Russia
D. Bychanok, S.A. Maksimenko
INP BSU, Minsk, Belarus
V.S. Petrakovsky, I.L. Pobol, A.I. Pokrovsky, A. Shvedov, S.V. Yurevich, V.G. Zaleski
Physical-Technical Institute of the National Academy of Sciences of Belarus, Minsk, Belarus
G.V. Trubnikov
JINR/VBLHEP, Dubna, Moscow region, Russia

Since 2015 the superconducting (SC) linac-injector development for Nuclotron NICA (JINR, Dubna, Russia) is carried out by the collaboration of JINR, NRNU MEPhI, INP BSU, PTI NASB. This new SC linac is to accelerate protons up to 20 MeV and light ions to 7.5 MeV/u with possible energy upgrade up to 50 MeV for proton beam. This paper reports the current status of the development and manufacturing of superconducting accelerating cavities for a new linear accelerator of the injection complex of the Nuclotron-NICA project.

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-THA01

About •

Received ※ 26 September 2021 — Revised ※ 27 September 2021 — Accepted ※ 09 October 2021 — Issued ※ 24 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPSA16

Design and Characteristics of Cryostat for Testing of Low-Beta 325 MHz Half-Wave Resonators

165

D. Bychanok, V. Bayev, S. Huseu, S.A. Maksimenko, A.E. Sukhotski, E. Vasilevich
INP BSU, Minsk, Belarus
A.V. Butenko, D. Nikiforov, E. Syresin
JINR, Dubna, Moscow Region, Russia
M. Gusarova, M.V. Lalayan, S.M. Polozov
MEPhI, Moscow, Russia
V.S. Petrakovsky, A.I. Pokrovsky, A. Shvedov, S.V. Yurevich
Physical-Technical Institute of the National Academy of Sciences of Belarus, Minsk, Belarus

Design of the prototype cryomodule for testing low-beta 325 MHz half-wave cavities is currently undergoing at INP BSU. The cryomodule allows performing intermediate vacuum-, temperature-, and rf-tests during the fabrication of half-wave resonators. The first experimental results of cryomodule cooling down to liquid nitrogen temperatures are presented and discussed. The pressure and temperature control allow us to estimate the main cooling/heating characteristics of the cryostat at different operation stages. The presented test cryomodule will be used for further development and production of superconductive niobium cavities for the Nuclotron-based Ion Collider fAcility (NICA) injector.

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA16

About •

Received ※ 16 September 2021 — Revised ※ 18 September 2021 — Accepted ※ 23 September 2021 — Issued ※ 26 September 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPSA42

Compact S-Band Accelerating Structure for Medical Applications

186

M.V. Lalayan, A. Batov, M. Gusarova, S.M. Polozov, R.A. Zbruev
MEPhI, Moscow, Russia

This paper describes electromagnetic design results for the compact 6.3 MeV electron linac for the radiation therapy facility. Linac is based on S-band biperiodic accelerating structure with inner coupling cells with an increased coupling coefficient.

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA42

About •

Received ※ 01 October 2021 — Revised ※ 02 October 2021 — Accepted ※ 09 October 2021 — Issued ※ 11 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUB07

The Conceptual Design of the 7.5 MeV/u Light Ion Injector

51

S.M. Polozov, A.E. Aksentyev, M.M. Bulgacheva, O.V. Deryabochkin, M.S. Dmitriyev, V.V. Dmitriyeva, M.V. Dyakonov, V.S. Dyubkov, A.V. Gerasimenko, A.A. Gorchakov, M. Gusarova, M.A. Guzov, E.N. Indiushnii, A.M. Korshunov, K.I. Kozlovskiy, A.S. Krasnov, M.V. Lalayan, Y. Lozeev, T.A. Lozeeva, A.I. Makarov, S.V. Matsievskiy, A.P. Melekhov, O.V. Murygin, R.E. Nemchenko, G.G. Novikov, A.E. Novozhilov, A.S. Panishev, V.N. Pashentsev, A.G. Ponomarenko, A.V. Prokopenko, V.I. Rashchikov, A.V. Samoshin, A.A. Savchik, V.L. Shatokhin, A.E. Shikanov, K.D. Smirnov, G.A. Tsarev, S.A. Tumanov, I.A. Yurin, M.I. Zhigailova
MEPhI, Moscow, Russia
M.L. Smetanin, A.V. Telnov
VNIIEF, Sarov, Russia
N.V. Zavyalov
RFNC-VNIIEF, Sarov, Nizhniy Novgorod region, Russia

The new linac for light ion beam injection is under development at MEPhI. Such linac was proposed for acceleration of 7.5 MeV/u ion beam with A/Z=1-3 and current up to 5 mA for proton and 0.4 pmA for light ions. The linac general layout will include two types of ion sources: ECR ion source for proton anf He ions and laser ion source for ions form Li to O. Following the LEBT ions will be bunched and accelerated to the final energy using RFQ section and 14 IH cavities. These IH-cavities will be identical (divided into two groups) and independently phased. All cavities will operate on 81 MHz. Results of the beam dynamics simulations and the cavities design will presented in the report.

Slides TUB07 [5.210 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-TUB07

About •

Received ※ 16 September 2021 — Revised ※ 25 September 2021 — Accepted ※ 27 September 2021 — Issued ※ 14 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPSC03

Multipactor Discharge in Short 5-Gap 80 MHz IH Structures

343

M.M. Bulgacheva, M. Gusarova, M.V. Lalayan
MEPhI, Moscow, Russia

The results of numerical simulations of multipacting discharge in accelerating Interdigital H-type (IH) cavities are presented in this paper. Optimal design parameters were selected to reduce the number of multipactor electrons. The localization of multipactor trajectories in the short 5-gap 80 MHz IH cavities at various levels of accelerating voltage is considered.

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-WEPSC03

About •

Received ※ 26 September 2021 — Revised ※ 27 September 2021 — Accepted ※ 09 October 2021 — Issued ※ 17 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPSC12

Preliminary Calculation of the Power Coupler for the SYLA Storage Ring RF Cavity

364

S.V. Matsievskiy, M. Gusarova, M.V. Lalayan, Ya.V. Shashkov
MEPhI, Moscow, Russia

Several new accelerator facilities will be built in Russia in the next few years. One of those facilities is a 6 GeV storage ring light source, the Ultimate Source of Synchrotron Radiation to be built in Protvino, near Moscow. This paper considers storage ring RF cavity power coupler design issues and provides preliminary calculations of the device.

Poster WEPSC12 [0.741 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-WEPSC12

About •

Received ※ 08 September 2021 — Accepted ※ 27 September 2021 — Issued ※ 22 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPSC13

Accelerating Cavities with HOM Damping for USSR-4 Storage Ring

367

Ya.V. Shashkov, M. Gusarova, M.V. Lalayan, N.Yu. Samarokov
MEPhI, Moscow, Russia
M. Gusarova
NRC, Moscow, Russia

Preliminary results on accelerating cavities for USSR-4 facility (also known as SYLA - SYnchrotron and free-electron LAser) project are presented. This facility is under development by collaboration hosted by National Research Center "Kurchatov Institute". SYLA is synchro-tron radiation facility based on injector linac and 6 GeV storage ring. Beam energy loss in storage ring is to be compensated by several modified pillbox cavities. Cavity geometry features, its operation frequency choice and induced HOM parameters are discussed. HOM damping technique using corrugated cylindrical waveguides were studied. Longitudinal impedance values of HOM are presented for initial accelerating cavity and structure with waveguides.

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-WEPSC13

About •

Received ※ 18 September 2021 — Revised ※ 30 September 2021 — Accepted ※ 09 October 2021 — Issued ※ 21 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)