RuPAC2014 - List of Authors (Andrianov, S.L.)

Paper	Title	Page
TUPSA27	The First Design of Medium Resolution Mass Spectrometer (MRMS) High Voltage Platform in a SPES Project	94
	S.L. Andrianov ITEP, Moscow, Russia M.F. Moisio, C. R. Roncolato INFN/LNL, Legnaro (PD), Italy
	A new project of 150 kV high voltage platform (HVP) is developed in a Laboratori Nazionali di Lagnaro as part of SPES (Selective Production of Exotic Species) project for the production of the multiply charged RIB (rare ion beams). The HVP will be located after ECR ion source charge breeder. Medium resolution mass spectrometer (MRMS) is installed at the platform to provide high purity beams with mass resolution about 1/1000. The Draft of platform design including all beamline elements is discussed. There is a several way of feeding equipment on HVP proposed, required engineering services parameters (vacuum system, cooling system, power system and etc) were defined. Some safety measures are proposed.

TUPSA28	The Advanced Nanostructure Steel Modification by Gas Ions Beams	97
	S.L. Andrianov, B.B. Chalykh, P.A. Fedin, B. Kondratiev, A.V. Kozlov, R.P. Kuibeda, T. Kulevoy, A.A. Nikitin, S.V. Rogozhkin, A. Sitnikov ITEP, Moscow, Russia
	New constriction materials are under developing for the energy sector. They will provide: energy prodaction, store and transportation with high efficiency and ecology safety. One of the main modern direction of new materials developing are nanostructures steel which consolidation oxide dispersion strengthened (ODS). ODS and EK-181 steels have high hot, radiation and corrosion resistance. The experimental program for investigation of nanoclusters generation and growth (in ODS steels) under irradiation of N (and also Ti, V) ion beams is ongoing in ITEP. Ion irradiation is performed at the accelerator complex TIPr with gas ion source duoplasmatron. In this article the source installation and it's power systems development of, as well as the results of ion beam charge state distribution measurements and the first results of ODS materials irradiation by gas ions are described and discussed.

WEPSB27	Design of Multifunctional Facility Based on ECR Ion Source for Material Science	220
	A.V. Ziiatdinova, T. Kulevoy MEPhI, Moscow, Russia S.L. Andrianov, B.B. Chalykh, G. Kropachev, R.P. Kuibeda, T. Kulevoy, A.V. Ziiatdinova ITEP, Moscow, Russia M. Comunian INFN/LNL, Legnaro (PD), Italy
	The traditional experimental method for new materials radiation resistance investigation is a reactor irradiation. However, there are some difficulties during steel exposure in reactor. Simulation method based on ion irradiation allows accelerating the defect generation in the material under investigation. Also a modification of materials by ion beams represents the great practical interest for modern material science. Experiments in both directions are ongoing in ITEP. The paper presents the design of the test-bench based on ECR ion source and electrostatic acceleration which is under development in ITEP. This paper describes the results of beam dynamics simulation in the transport channels of the test-bench. Simulation was carried out in the "real" fields Continuous ion beam achievable at the test-bench enables beam fluence on the target up to 10¹⁶ particles/m2.

WEPSB48	Status of Experiments on Surface Modification of Materials on the Accelerator HIP-1	269
	S.L. Andrianov, A.A. Aleev, A. A. Andreev, D. Aparin, A.A. Bogachev, B.B. Chalykh, P.A. Fedin, A. Golubev, N.A. Iskandarov, G. Kropachev, R.P. Kuibeda, T. Kulevoy, A.A. Nikitin, N.N. Orlov, S.V. Rogozhkin, A. Sitnikov ITEP, Moscow, Russia
	Ion-implant doping is efficient method of modification for near-surface layers material which used in different technological applications. The most common example of its is increase wear, corrosion, heat resistance of various industrial steels, special alloys implantation for applications in biology and medicine, surface layers of polymers strengthening and changes in the morphology. Works in this direction is executing on TIPR-1 accelerator in ITEP. Bunches of titanium and vanadium which are generated in MEVVA and nitrogen beams are generated in duoplasmatron was mastered acceleration to provide of experimental work. Several series of experiments on the modification of the surface of samples for further study by atomic probe tomography and transmission electron microscopy executed. Nanostructure of the surface layers of oxide dispersion strengthened steels exposed to ion beams showed makeover.

Paper

Title

Page

The First Design of Medium Resolution Mass Spectrometer (MRMS) High Voltage Platform in a SPES Project

94

S.L. Andrianov
ITEP, Moscow, Russia
M.F. Moisio, C. R. Roncolato
INFN/LNL, Legnaro (PD), Italy

A new project of 150 kV high voltage platform (HVP) is developed in a Laboratori Nazionali di Lagnaro as part of SPES (Selective Production of Exotic Species) project for the production of the multiply charged RIB (rare ion beams). The HVP will be located after ECR ion source charge breeder. Medium resolution mass spectrometer (MRMS) is installed at the platform to provide high purity beams with mass resolution about 1/1000. The Draft of platform design including all beamline elements is discussed. There is a several way of feeding equipment on HVP proposed, required engineering services parameters (vacuum system, cooling system, power system and etc) were defined. Some safety measures are proposed.

TUPSA28

The Advanced Nanostructure Steel Modification by Gas Ions Beams

97

S.L. Andrianov, B.B. Chalykh, P.A. Fedin, B. Kondratiev, A.V. Kozlov, R.P. Kuibeda, T. Kulevoy, A.A. Nikitin, S.V. Rogozhkin, A. Sitnikov
ITEP, Moscow, Russia

New constriction materials are under developing for the energy sector. They will provide: energy prodaction, store and transportation with high efficiency and ecology safety. One of the main modern direction of new materials developing are nanostructures steel which consolidation oxide dispersion strengthened (ODS). ODS and EK-181 steels have high hot, radiation and corrosion resistance. The experimental program for investigation of nanoclusters generation and growth (in ODS steels) under irradiation of N (and also Ti, V) ion beams is ongoing in ITEP. Ion irradiation is performed at the accelerator complex TIPr with gas ion source duoplasmatron. In this article the source installation and it's power systems development of, as well as the results of ion beam charge state distribution measurements and the first results of ODS materials irradiation by gas ions are described and discussed.

WEPSB27

Design of Multifunctional Facility Based on ECR Ion Source for Material Science

220

A.V. Ziiatdinova, T. Kulevoy
MEPhI, Moscow, Russia
S.L. Andrianov, B.B. Chalykh, G. Kropachev, R.P. Kuibeda, T. Kulevoy, A.V. Ziiatdinova
ITEP, Moscow, Russia
M. Comunian
INFN/LNL, Legnaro (PD), Italy

The traditional experimental method for new materials radiation resistance investigation is a reactor irradiation. However, there are some difficulties during steel exposure in reactor. Simulation method based on ion irradiation allows accelerating the defect generation in the material under investigation. Also a modification of materials by ion beams represents the great practical interest for modern material science. Experiments in both directions are ongoing in ITEP. The paper presents the design of the test-bench based on ECR ion source and electrostatic acceleration which is under development in ITEP. This paper describes the results of beam dynamics simulation in the transport channels of the test-bench. Simulation was carried out in the "real" fields Continuous ion beam achievable at the test-bench enables beam fluence on the target up to 10¹⁶ particles/m2.

WEPSB48

Status of Experiments on Surface Modification of Materials on the Accelerator HIP-1

269

S.L. Andrianov, A.A. Aleev, A. A. Andreev, D. Aparin, A.A. Bogachev, B.B. Chalykh, P.A. Fedin, A. Golubev, N.A. Iskandarov, G. Kropachev, R.P. Kuibeda, T. Kulevoy, A.A. Nikitin, N.N. Orlov, S.V. Rogozhkin, A. Sitnikov
ITEP, Moscow, Russia

Ion-implant doping is efficient method of modification for near-surface layers material which used in different technological applications. The most common example of its is increase wear, corrosion, heat resistance of various industrial steels, special alloys implantation for applications in biology and medicine, surface layers of polymers strengthening and changes in the morphology. Works in this direction is executing on TIPR-1 accelerator in ITEP. Bunches of titanium and vanadium which are generated in MEVVA and nitrogen beams are generated in duoplasmatron was mastered acceleration to provide of experimental work. Several series of experiments on the modification of the surface of samples for further study by atomic probe tomography and transmission electron microscopy executed. Nanostructure of the surface layers of oxide dispersion strengthened steels exposed to ion beams showed makeover.