Paper |
Title |
Page |
THPD03 |
PLC Controlled Search & Secure Safety Interlock System for Accelerator |
142 |
|
- V. Sharma, S. Acharya, S. Gond, K.C. Mittal, R.N. Rajan
BARC, Mumbai, India
|
|
|
PLC based search and scram system is designed and commissioned to ensure the accelerator cell being free from any human occupancy before we start the accelerator. Search and Scram units which are controlled by PLC have been installed at different places inside the cell area. The operator of the accelerator has to clear all the units by pressing the secure button. Clearing each of the unit and pressing the button ensures that there is nobody left inside the cell after all the units are cleared. If someone remains trapped inside cell even after search and secure operation successfully performed, he can press any emergency button located on each of the Scram unit to switch off the accelerator immediately. The operation is time limited so if the operator fails to do the search operation in time, the entire system will get tripped and will require to the operator to do the entire operation again. This system generates HV ON enable signal. If any of the door is opened or Scram is pressed the HV supply switches off and radiation ceases off immediately. This system has the merit that it offers timing and sequence flexibility but retains the safety merit of hard wired circuit.
|
|
|
Poster THPD03 [0.571 MB]
|
|
|