• D. Dowell, E. N. Jongewaard, J. R. Lewandowski, Z. Li, C. Limborg-Deprey, J. F. Schmerge, A. E. Vlieks, J. W. Wang, L. Xiao
  SLAC, Menlo Park, California

The beam quality and operational requirements for the Linac Coherent Light Source (LCLS) currently being constructed at SLAC are exceptional, requiring the design of a new RF photocathode gun for the electron source. Based on operational experience at GTF at SLAC, SDL and ATF at BNL and other laboratories, the 1.6cell s-band (2856MHz) gun was chosen to be the best electron source for the LCLS injector, however a significant re-design was necessary to achieve the challenging parameters. Detailed 3-D analysis and design was used to produce nearly-perfect rotationally symmetric rf fields to achieve the emittance requirement. In addition, the thermo-mechanical design allows the gun to operate at 120Hz and a 140MV/m cathode field, or to an average power dissipation of 4kW. Both average and pulsed heating issues are addressed in the LCLS gun design. The first LCLS gun is now fabricated and has been operated with high-power RF. The results and analysis of these high-power tests will be presented.

• D. Dowell, E. N. Jongewaard, C. Limborg-Deprey, J. F. Schmerge, A. E. Vlieks
  SLAC, Menlo Park, California

The field emission was measured during the high-power testing of the LCLS photocathode RF gun. A careful study and analysis of the field emission electrons, or dark current is important in assessing the gun's internal surface quality in actual operation, especially those surfaces with high fields. The charge per 2 microsecond long RF pulse (the dark charge) was measured as a function of the peak cathode field for the 1.6 cell, 2.856GHz LCLS RF gun. Faraday cup data was taken for cathode peak RF fields up to 120MV/m producing a maximum of 0.6nC/RF pulse for a diamond-turned polycrystalline copper cathode installed in the gun. The field dependence of the dark charge is analyzed using a temperature-dependent Fowler-Nordheim (FN) theory to obtain the field enhancement factor and other emitter parameters. Digitized images of the dark charge were taken using a 100 micron thick YAG crystal for a range of solenoid fields to determine the location and angular distribution of the field emitters. The FN plots and emitter image analysis will be described in this paper.