UMD, College Park, Maryland
A common challenge for accelerator systems is to maintain beam quality and brightness over the usually long distance from the source to the target. In order to do so, knowledge of the beam distribution in both configuration and velocity space along the beam line is needed. However, measurement of the velocity distribution can be difficult, especially for beams with strong space charge. Here we present a simple and portable tomographic method to map the beam phase space, which can be used in the majority of accelerators. The tomographic reconstruction process has first been compared with results from simulations using the particle-in-cell code WARP. Results show excellent agreement even for beams with extreme space charge and exotic distributions. Our diagnostic has also been successfully demonstrated experimentally on the University of Maryland Electron Ring, a compact ring designed to study the transverse dynamics of beams in both emittance and space charge dominated regimes. Special emphasis is given to intense beams where our phase space tomography diagnostic is used to shed light on the consequences of the space charge forces on the transport of these beams.
UMD, College Park, Maryland
The University of Maryland Electron Ring (UMER) is a scaled storage ring using low-energy electrons to inexpensively model beams with high-space-charge. With the ability to inject such beams comes the problem of longitudinal end erosion of both the head and tail. It is important therefore to apply suitably designed longitudinal focusing forces to confine the beam and prevent it from its normal expansion. This paper presents the design and prototyping of an induction cell for this purpose. Successful operation of the induction cell would push the achievable number of turns and also enable us to perform studies of the longitudinal physics of such highly space-charge dominated beams. The pulsed voltage requirements for such a system on UMER would require ear-fields that switch 3kV in about 8ns or so for the most intense flat-top rectangular beam injected into the ring. This places a considerable challenge on the electronics used to deliver ideal waveforms with a compact module. Alternate waveforms are also being explored for other various injected beam shapes into UMER.
UMD, College Park, Maryland
Beam based alignment and control has been a critical issue for many accelerators. In this paper, we've developed a new approach that can correct the beam orbit using a systematic quad-scan method, where there is an insufficient number of beam position monitors. In this approach, we've proposed a calibrated response matrix. This matrix takes consideration of the different sensitivities of different quadrupoles in the lattice. With the calibrated response matrix, we can greatly enhance our ability to control the beam centroid motion and reduce the control effort.
UMD, College Park, Maryland
Circular accelerators and storage rings have traditionally been designed with limited intensity in order to avoid resonances and instabilities. The possibility of operating a ring beyond the Laslett tune shift limit has been suggested but little tested, apart from a pioneering experiment by Maschke at the BNL AGS in the early 1980s. We have recently circulated the highest-space-charge beam in a ring to date in the University of Maryland Electron Ring (UMER), achieving a breakthrough both in the number of turns and in the amount of current propagated. At undepressed tunes of up to 7.6, the space charge in UMER is sufficient to depress the tune by nearly a factor of 2, resulting in tune shifts up to 3.6. This makes the UMER beam the most intense beam that has been propagated to date in a circular lattice. This is an exciting and promising result for future circular accelerators, and the UMER beam can now be used as a platform to study intense space charge dynamics in rings.
UMD, College Park, Maryland
Longitudinal perturbations can be generated in the space-charge dominated regimes in which most beams of interest are born. To study the modification of transverse beam distributions by longitudinal beam dynamics, we have conducted experimental studies using low energy electron beams by taking time resolved images of a beam with longitudinal density perturbations. Two different diagnostics are used: optical transition radiation (OTR) produced from an intercepting silicon based aluminum screen and a fast (<5ns decay time) phosphor screen. It is found that the beam is significantly affected by the perturbation. However the OTR signal is very weak and requires over 45 minutes of frame integration. The fast phosphor screen has much better sensitivity (~1'000 times enhancement). In this paper, we also report on the time resolved measurement of a parabolic beam, showing interesting correlations between transverse and longitudinal distributions of the beam.
UMD, College Park, Maryland
The University of Maryland Electron Ring (UMER) is a scaled model to investigate the transverse and longitudinal physics of space charge dominated beams. It uses a 10-keV electron beam along with other scaled beam parameters that model the larger machines but at a lower cost. Understanding collective behavior of intense, charged particle beams due to their space charge effects is crucial for advanced accelerator research and applications. This paper presents the experimental study of longitudinal dynamics of an initial density modulation on a spacecharge dominated beam. A novel experimental technique of producing a perturbation using a laser is discussed. Using a laser to produce a perturbation provides the ability to launch a pure density modulation and to have better control over the amount of perturbation introduced. Collective effects like space charge waves and its propagation over long distances in a quadrupole channel are studied. One dimensional cold fluid model is used for theoretical analysis and simulations are carried out in WARP-RZ.