IIT, Chicago, Illinois
Fermilab, Batavia, Illinois
Illinois Institute of Technology, Chicago, Illinois
* Synergia: A 3D Accelerator Modelling Tool with 3D Space Charge. Journal of Computational Physics, Volume 211, Issue 1 , 1 January 2006, Pages 229-248.
ANL, Argonne, Illinois
SLAC, Menlo Park, California
Illinois Institute of Technology, Chicago, Illinois
A study of breakdown mechanism has been initiated at the Argonne Wakefield Accelerator Facility (AWA). Breakdown may include several factors such as local field enhancement, explosive electron emission, Ohmic heating, tensile stress produced by electric field, and others. The AWA is building a dedicated facility to test various models for breakdown mechanisms and to determine the roles of different factors in the breakdown. An imaging system is being put together to identify single emitters on the cathode surface. This will allow us to study dark current properties in the gun. We also plan to trigger breakdown events with a high-powered laser at various wavelengths (IR to UV). Another experimental idea follows from the recent work on a Schottky-enabled photoemission in an RF photoinjector that allows us to determine in situ the field enhancement factor on a cathode surface. Monitoring the field enhancement factor before and after can shed some light on a modification of metal surface after the breakdown.
ANL, Argonne, Illinois
Illinois Institute of Technology, Chicago, Illinois
Metamaterials (MTM) are artificial periodic structures made of small elements and designed to obtain specific electromagnetic properties. As long as the periodicity and the size of the elements are much smaller than the wavelength of interest, an artificial structure can be described by a permittivity and permeability, just like natural materials. Metamaterials can be customized to have the permittivity and permeability desired for a particular application. Waveguides loaded with metamaterials are of interest because the metamaterials can change the dispersion relation of the waveguide significantly. Slow backward waves, for example, can be produced in a LHM-loaded waveguide without corrugations. In this paper we present theoretical studies and computer modeling of waveguides loaded with 2D anisotropic metamaterials, including the dispersion relation for a MTM-loaded waveguide. The dispersion relation of a MTM-loaded waveguide has several interesting frequency bands which are described. It is shown theoretically that dipole mode suppression may be possible. Therefore, metamaterials can be used to suppress wakefields in accelerating structures.
ANL, Argonne, Illinois
Illinois Institute of Technology, Chicago, Illinois
For an ILC undulator-based positron source target configuration, a strong optical matching device (OMD) field is needed inside the target to increase the positron yield (by more than 40%)[1]. It is also required that the positron target is constantly rotated to reduce thermal and radiation damage. We report on a simulation of the rotating metal target wheel under a strong magnetic field. By rearranging Maxwell?s equations for a rotating frame and using FEMLAB, we have solved the detailed magnetic field distribution and eddy current of a rotating metal disk in magnetic field, and so the required power to drive the target wheel. In order to validate the simulation process, we have compared our results with previous experimental data [2] and found they are in very good agreement, but differ from previous approximate models [3]. Here we give detailed results on the proposed ILC target system, such as induced magnetic field (dipole and higher orders), eddy current distribution and the driving force requirements. The effect of these higher order fields on the positron beam dynamics is also considered.