A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Piller, M. F.

Paper Title Page
MOPAS078 Digital RF Control for Spallation Neutron Source Accumulator Ring 611
 
  • H. Ma, M. S. Champion, M. T. Crofford, T. W. Hardek, K.-U. Kasemir, M. F. Piller, Y. Zhang
    ORNL, Oak Ridge, Tennessee
 
  Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U. S. Department of Energy.

The proposed upgrade plan for RF control of the Spallation Neutron Source (SNS) accumulator ring requires that the new digital field control module (FCM) support both the conventional narrow-band feed forward control and a new beam-based feed forward control. Both are necessary for compensating the heavy beam loading in SNS ring. The ring FCM also has the integrated control and monitoring features for the cavity bias, cavity resonance, and tetrode grid boost. A user-friendly Epics GUI for all these FCM functionalities is also a part of the requirement. The ring FCM under development is being implemented on the hardware of the proven FCM of SNS Linac. Both the controller architecture and the design code of the digital hardware for the Linac system will be largely reused in the ring system.

 
WEPMS081 Simulation and Initial Test Result of the SNS Ring RF System 2520
 
  • Y. Zhang, M. S. Champion, P. Chu, S. M. Cousineau, V. V. Danilov, T. W. Hardek, J. A. Holmes, H. Ma, M. F. Piller, M. A. Plum
    ORNL, Oak Ridge, Tennessee
 
  Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U. S. Department of Energy

A simulation code has been developed for the study of the Spallation Neutron Source (SNS) ring RF control. The code uses the time-domain solvers to compute beam-cavity interactions, and FFT methods to simulate time responses of the linear RF system. The important ingredients of the system are considered in the simulation model, which include the beam loading, dynamic cavity detuning, circuit bandwidth, loop delay, proportional-integral (P-I) controller for feedback and adaptive feed forward, stochastic noise, with-in-turn RF parameter change, beam current fluctuation and beam bunch leakage, etc. The beam loss in the accumulation ring goes up as the beam power increases, and thus a precise control of bunching voltage phase and amplitude is required to limit beam loss. This simulation tool will help the development a correct RF control and to achieve the goal of minimizing the beam loss.

 
FROAC01 The Spallation Neutron Source Accumulator Ring RF System 3795
 
  • T. W. Hardek, M. S. Champion, M. T. Crofford, H. Ma, M. F. Piller
    ORNL, Oak Ridge, Tennessee
  • K. Smith, A. Zaltsman
    BNL, Upton, Long Island, New York
 
  Funding: SNS is managed by UT-Batelle, LLC, under contract DE-AC05-00OR22725 for the U. S. Department of Energy.

The Spallation Neutron Source (SNS) accumulator ring is a fixed-frequency proton storage ring located at the output of the SNS Linear Accelerator (Linac). Its purpose is to convert 1 millisecond H- beam pulses from the SNS Linac into high-intensity 695 nanosecond pulses of protons for delivery to the neutron target. The RF bunching system controls longitudinal beam distribution during the accumulation process and maintains a 250+ nanosecond gap required for beam extraction. The RF system consists of three stations which operate at a beam revolution frequency of 1.05 MHz while a fourth station provides a second harmonic component at 2.1 MHz. The beam pulse at extraction consists of 1.6·1014 protons representing a peak beam current of 52 amperes. The system utilizes four 600kW tetrodes to provide the RF current necessary to produce the 40kV peak-bunching voltage and to control phase and amplitude at this high beam current. In this paper we review the design concepts incorporated into this heavily beam-loaded RF system and discuss its commissioning status.

 
slides icon Slides