• D. G. Ouzounov, I. V. Bazarov, B. M. Dunham, C. K. Sinclair
  Cornell University, Department of Physics, Ithaca, New York
• F. W. Wise, S. Zhou
  Cornell University, Ithaca, New York

Cornell University is developing a high brightness, high average current electron source for the injector of an ERL based synchrotron radiation source. The source is a DC electron gun with a negative electron affinity photoemission cathode. The photocathode is illuminated by a 1300 MHz CW train of optical pulses to produce a 100 mA average current beam. The optical pulse train is generated by frequency doubling the output of a diode-pumped, mode-locked Yb-fiber oscillator-amplifier system. The 50 MHz fundamental frequency oscillator is locked on its 26th harmonic to produce the 1300 MHz train. The oscillator output is amplified in three stages and doubled to give 26 W in the green. The doubled beam is diffraction limited (M2 = 1.08) with a pulse width of 2.5 ps. This pulse is split and differentially delayed in a series of birefringent crystals to produce a flat top temporal profile with fast rise and fall times. The final pulse shape is measured by cross-correlation. The pulses are spatially shaped by a commercial aspheric lens system. A full power system operating at 50 MHz is in routine use for electron beam measurements. Detailed laser performance information will be presented.

• C. K. Sinclair, I. V. Bazarov, B. M. Dunham, Y. Li, X. G. Liu, D. G. Ouzounov
  Cornell University, Department of Physics, Ithaca, New York
• F. E. Hannon
  Cockcroft Institute, Lancaster University, Lancaster
• T. Miyajima
  KEK, Ibaraki

Recent computational optimizations have demonstrated that it should be possible to construct electron injectors based on photoemission cathodes in very high voltage DC electron guns in which the beam emittance is dominated by the thermal emittance from the cathode. Negative electron affinity photocathodes have been shown to have a naturally low thermal emittance. However, the thermal emittance depends on the illuminating wavelength; the degree of negative affinity; and the band structure of the photocathode material. As part of the development of a high brightness, high average current photoemission electron gun for the injector of an ERL light source, we have measured the thermal emittance from negative affinity GaAs and GaAsP photocathodes. The measurements were made by measuring the electron beam spot size downstream of a counter-wound solenoid lens as a function of the lens strength. Electron beam spot sizes were measured by two techniques - a 20 micron wire scanner, and a CVD diamond screen. Both Gaussian and 'tophat' spatial profiles were used, and measurements were made at several wavelengths. Results will be presented for both cathode types.