| Paper | Title | Page |
|---|---|---|
| WEPMS086 | Design of a 26 GHz Wakefield Power Extractor | 2535 |
|
||
| High frequency, high output power, and high efficiency RF sources have compelling applications in accelerators for high energy physics. The 26 GHz RF power extractor proposed in this paper provides a practical approach for generating high power RF in this particular frequency range. The extractor is designed to couple out RF power generated from the high charge electron bunch train at the Argonne Wakefield Accelerator (AWA) facility traversing dielectric loaded or corrugated waveguides. In this paper we evaluate two different techniques for extracting the beam energy at the AWA: one is based on a completely metallic corrugated waveguide and coupler; and the other is based on a dielectric lined circular waveguide and coupler. Designs for both RF power extractors will be presented including parameter optimization, the electromagnetic modeling of structures and RF couplers, and the analysis of beam dynamics. | ||
| THPMN086 | Metamaterial-loaded Waveguides for Accelerator Applications | 2906 |
|
||
|
Funding: US Department of Energy National Science Foundation grant # 0237162 Metamaterials (MTM) are artificial periodic structures made of small elements and designed to obtain specific electromagnetic properties. As long as the periodicity and the size of the elements are much smaller than the wavelength of interest, an artificial structure can be described by a permittivity and permeability, just like natural materials. Metamaterials can be customized to have the permittivity and permeability desired for a particular application. Waveguides loaded with metamaterials are of interest because the metamaterials can change the dispersion relation of the waveguide significantly. Slow backward waves, for example, can be produced in a LHM-loaded waveguide without corrugations. In this paper we present theoretical studies and computer modeling of waveguides loaded with 2D anisotropic metamaterials, including the dispersion relation for a MTM-loaded waveguide. The dispersion relation of a MTM-loaded waveguide has several interesting frequency bands which are described. It is shown theoretically that dipole mode suppression may be possible. Therefore, metamaterials can be used to suppress wakefields in accelerating structures. |
||
| THPMN088 | C-Band High Power RF Generation and Extraction Using a Dielectric Loaded Waveguide | 2912 |
|
||
|
Funding: Department of Energy
We report on the fabrication, simulation, and high-power testing of a C-band RF power extractor recently conducted at the Argonne Wakefield Accelerator (AWA) facility. Dielectric loaded accelerating (DLA) structures can be used for high-power RF generation [*,**] when a high-current electron beam passes through a DLA structure and loses energy into the modes of the structure due to self-wakefields. The AWA generates high charge (up to 100nC), short bunch length (1.5mm~2.5mm) electron beams, which is ideal for high-power RF generation. The generated RF power can be subsequently extracted with a properly designed extraction coupler in order to accelerate a second beam, or for other high power purposes. In this paper, the detailed design of a 7.8 GHz DLA power extractor, MAFIA simulations, and results of the high-power test are presented. Simulation predictions of an 79 MW, 2.2 ns long RF pulse (generated by a single 100 nC electron bunch) and a longer RF pulse of the same power (obtained from a 35 nC periodic bunch train) will be compared to experimental results.
* W. Gai, et al, Experimental Demonstration of Two Beam Acceleration Using Dielectric Step-up Transformer, PAC01, pp.1880-1882.** D. Yu, et al, 21GHz Ceramic RF Power Extractor, AAC02, pp.484-505. |
||
| THPMS073 | Progress towards a Gap Free Dielectric-Loaded Accelerator | 3151 |
|
||
|
One of the major concerns in the development of Dielectric-Loaded Accelerating (DLA) structures is the destructive breakdown at dielectric joints caused by a local electric field enhancement induced by the discontinuity of the dielectric constant on the surface of the joint gap. Our previous X-band traveling wave DLA structure design*, for example, incorporated two separate impedance matching sections with at least two dielectric joints. In this paper, we present a new design to avoid this problem. This scheme is based on a coaxial type coupler which is able to implement mode conversion and impedance matching at the same time and therefore to eliminate joint gap induced breakdown. The new structure is under construction; bench test results will be presented
* C. Jing, W. Gai, J. Power, R. Konecny, S. Gold, W. Liu and A. Kinkead, IEEE, Trans. PS, vol.33 No.4, Aug. 2005, pp.1155-1160. |
||
| THPMS075 | High Power Testing of a Fused Quartz-based Dielectric-loaded Accelerating Structure | 3157 |
|
||
| We report on the most recent results from a series of high power tests being carried out on RF-driven dielectric-loaded accelerating (DLA) structures. The purpose of these tests is to determine the viability of the DLA as a traveling-wave accelerator and is a collaborative effort between Argonne National Laboratory (ANL), Naval Research Laboratory (NRL), and Stanford Linear Accelerator Center (SLAC). In this paper, we report on the recent high power tests of a fused quartz-based DLA structure that was carried out at incident powers of up to 12 MW at NRL and 37 MW at SLAC. We report experimental details of the RF conditioning process and make comparison of our multipactor model to the experiment, including tests of geometrical scaling laws and the time evolution of multipactor. Finally, we discuss future plans for the program including a planned test of new quartz-based DLA with a different geometry to both reach higher accelerating gradients and to continue the parametric study of multipactor. | ||
| THPMS096 | Development of a Dielectric-Loaded Test Accelerator | 3211 |
|
||
|
Funding: Work supported by DoE and ONR.
A joint project is underway by the Naval Research Laboratory (NRL) and Argonne National Laboratory (ANL), in collaboration with the Stanford Linear Accelerator Center (SLAC), to develop a compact X-band accelerator for testing dielectric-loaded accelerator (DLA) structures.* The accelerator will use a 5-MeV injector previously developed by the Tsinghua University in Beijing, China, and will accommodate test structures up to 0.5 m in length. Both the injector and the structures will be powered by an 11.4-GHz magnicon amplifier that can produce 25 MW, 200-ns output pulses at up to 10 Hz. The injector will require ~5 MW of rf power, leaving ~20 MW to power the test structures. This paper will present a progress report on the construction and commissioning of the test accelerator, which will be located in a concrete bunker in the Magnicon Facility at NRL.
* S. H. Gold et al., Proc. PAC 2005. |
||
| FRPMN117 | Pepper-pot Based Emittance Measurements of the AWA Photoinjector | 4393 |
|
||
| The Argonne Wakefield Accelerator (AWA) RF photocathode gun is a 1.5 cell, L-band, RF photocathode gun operating at 80 MV/m, with an emittance compensating solenoid, and a magnesium photocathode and generates an 8 MeV, 1 nC - 100 nC beam. In this paper, we report on a parametric set of measurements to characterize the transverse trace space of the 1 nC electron beam directly out of the gun. The entire experiment is simulated with PARMELA, from the photocathode, through the pepper pot, and to the imaging screen. The transverse trace-space is sampled with a 2-D pepper pot which allows for simultaneous, single-shot measurements, of both the x and y distributions. A series of pepper pots were available during the experiment to increase the dynamic range of emittance measurements. Realistic particle distributions are used for the simulations and are derived from actual laser profiles, which were captured from a virtual cathode and generated with MATLAB-based particle generator. We report both the second moment (emittance) and the detailed phase space distribution over a gun launch phase range of approximately 50 degrees. |