| Paper |
Title |
Page |
| TUPAN039 |
Profile Measurement and Transverse Matching in J-PARC Linac
|
1472 |
| |
- H. Akikawa, Z. Igarashi, M. Ikegami, S. Lee
KEK, Ibaraki
- S. Sato, T. Tomisawa, A. Ueno
JAEA/LINAC, Ibaraki-ken
- G. B. Shen
JAEA, Ibaraki-ken
|
|
| |
Beam commissioning of J-PARC linac has been performed since November 2006. In the beam commissioning, transverse matching has been performed by measurement of beam profiles and emittance with wire scanners. In this presentation, detail of wire scanners and the method of matching are described.
|
|
| TUPAN043 |
RF Amplitude and Phase Tuning of J-PARC DTL
|
1481 |
| |
- M. Ikegami, Z. Igarashi, H. Tanaka
KEK, Ibaraki
- H. Asano, T. Kobayashi
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken
- K. Hasegawa, T. Ito, T. Morishita, S. Sato, A. Ueno
JAEA/LINAC, Ibaraki-ken
- H. Sako
JAEA, Ibaraki-ken
|
|
| |
The beam commissioning of J-PARC linac has been started in November 2006. In the beam commissioning, the tuning of the RF phase and amplitude for its DTL (Drift Tube Linac) has been performed with a phase-scan method. Detailed results of the RF tuning are presented with a brief discription of the tuning procedure.
|
|
| FRPMN045 |
Beam Position Monitor and its Calibration in J-PARC LINAC
|
4072 |
| |
- S. Sato, T. Tomisawa, A. Ueno
JAEA/LINAC, Ibaraki-ken
- H. Akikawa, Z. Igarashi, N. Kamikubota, S. Lee
KEK, Ibaraki
- M. Ikegami
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken
- H. Sako, G. B. Shen
JAEA, Ibaraki-ken
|
|
| |
The beam commissioning of J-PARC linac has been started in November 2006. Beam Position Monitors (BPMs) which have been calibrated on the bench setup with a scanning wire, utilize beam based calibration to relate the BPM center and the center of Q magnet. In this presentation, detail of installed BPM and the calibration methods are described.
|
|