BNL, Upton, Long Island, New York
ALBA, Bellaterra (Cerdanyola del Valles)
Since 2001 RHIC has experienced electron cloud effects, which have limited the beam intensity. These include dynamic pressure rises – including pressure instabilities, a reduction of the stability threshold for bunches crossing the transition energy, and possibly slow emittance growth. We report on the main observations in operation and dedicated experiments, as well as the effect of various countermeasures including baking, NEG coated warm pipes, pre-pumped cold pipes, bunch patterns, scrubbing, and anti-grazing rings.
CERN, Geneva
BNL, Upton, Long Island, New York
Fermilab, Batavia, Illinois
BNL, Upton, Long Island, New York
CERN, Geneva
We use transverse beam transfer functions to measure tune distributions of colliding beams in RHIC. The tune has a distribution due to the beam-beam interaction, nonlinear magnetic fields – particularly in the interaction region magnets, and non-zero chromaticity in conjunction with momentum spread. The measured tune distributions are compared with calculations.
BNL, Upton, Long Island, New York
CERN, Geneva
SLAC, Menlo Park, California
Fermilab, Batavia, Illinois
LBNL, Berkeley, California
A DC wire has been installed in RHIC to explore the long-range beam-beam effect, and test its compensation. We report on experiments that measure the effect of the wire's electro-magnetic field on the beam's lifetime and tune distribution, and accompanying simulations.
BNL, Upton, Long Island, New York
Gold ions for the 2007 run of the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory (BNL) are accelerated in the Tandem, Booster and AGS prior to injection into RHIC. The setup and performance of this chain of accelerators will be reviewed with a focus on improvements in the quality of beam delivered to RHIC. In particular, more uniform stripping foils between Booster and AGS, and a new bunch merging scheme in AGS promise to provide beam bunches with reduced longitudinal emittance for RHIC.
BNL, Upton, Long Island, New York
To achieve the RHIC polarized proton enhanced luminosity goal of 150*1030 cm-2 sec-1 on average in stores at 250 GeV, the luminosity needs to be increased by a factor of 3 compared to what was achieved in 2006. Since the number of bunches is already at its maximum of 111, limited by the injection kickers and the experiments' time resolution, the luminosity can only be increased by either increasing the bunch intensity and/or reducing the beam emittance. This leads to a larger beam-beam tuneshift parameter. Operation during 2006 has shown that the beam-beam interaction is already dominating the luminosity lifetime. To overcome this limitation, a near-integer working point is under study. We will present recent results of these studies.
BNL, Upton, Long Island, New York
There is significant interest in RHIC heavy ion collisions at c.m. energies of 5-50 GeV/u, motivated by a search for the QCD phase transition critical point. The low end of this energy range is well below the nominal RHIC injection c.m. energy of 19.6 GeV/u. There are several challenges that face RHIC operations in this regime, including longitudinal acceptance, magnet field quality, lattice control, and luminosity monitoring. We report on the status of work to address these challenges and include results from beam tests of low-energy RHIC operations with protons and gold.
BNL, Upton, Long Island, New York
After the last successful RHIC Au-Au run in 2004 (Run-4), RHIC experiments now require significantly enhanced luminosity to study very rare events in heavy ion collisions. RHIC has demonstrated its capability to operate routinely above its design average luminosity per store of 2x1026 cm-2 s-1. In Run-4 we already achieved 2.5 times the design luminosity in RHIC. This luminosity was achieved with only 40% of bunches filled, and with β* = 1 m. However, the goal is to reach 4 times the design luminosity, 8x1026 cm-2 s-1, by reducing the beta* value and increasing the number of bunches to the accelerator maximum of 111. In addition, the average time in store should be increased by a factor of 1.1 to about 60% of calendar time. We present an overview of the changes that increased the instantaneous luminosity and luminosity lifetime, raised the reliability, and improved the operational efficiency of RHIC Au-Au operations during Run-7.
BNL, Upton, Long Island, New York
ITEP, Moscow
The Relativistic Heavy Ion Collider~(RHIC) as the first high energy polarized proton collider was designed to provide polarized proton collisions at a maximum beam energy of 250GeV. It has been providing collisions at a beam energy of 100GeV since 2001. Equipped with two full Siberian snakes in each ring, polarization is preserved during the acceleration from injection to 100GeV with careful control of the betatron tunes and the vertical orbit distortions. However, the intrinsic spin resonances beyond 100GeV are about a factor of two stronger than those below 100GeV making it important to examine the impact of these strong intrinsic spin resonances on polarization survival and the tolerance for vertical orbit distortions. Polarized protons were accelerated to the record energy of 250GeV in RHIC with a polarization of 45\% measured at top energy in 2006. The polarization measurement as a function of beam energy also shows some polarization loss around 136GeV, the first strong intrinsic resonance above 100GeV. This paper presents the results and discusses the sensitivity of the polarization survival to orbit distortions.
Jefferson Lab, Newport News, Virginia
IUCF, Bloomington, Indiana
BTG, New York
BNL, Upton, Long Island, New York
ANL, Argonne, Illinois
Experiments on the study of fundamental quark-gluon structure of nucleons require an electron-light ion collider of a center of mass energy from 20 to 65 GeV at luminosity level of 1035 cm-2s-1 with both beams polarized. A CEBAF accelerator based ring-ring collider of 7 GeV electrons/positrons and 150 GeV light ions is envisioned as a possible next step after the 12 GeV CEBAF Upgrade. The developed ring-ring scheme takes advantage of the existing polarized continuous electron beam and SRF linac, the green-field design of the collider rings and the ion accelerator complex with electron cooling. We report results of our design studies of the ring-ring version of an electron-light ion collider of the required luminosity.
BNL, Upton, Long Island, New York
Tech-X, Boulder, Colorado
ORNL, Oak Ridge, Tennessee
AES, Princeton, New Jersey
Fermilab, Batavia, Illinois
Jefferson Lab, Newport News, Virginia
BINP SB RAS, Novosibirsk
JINR, Dubna, Moscow Region
The physics interest in a luminosity upgrade of RHIC requires the development of a cooling-frontier facility. Detailed cooling calculations have been made to determine the efficacy of electron cooling of the stored RHIC beams. This has been followed by beam dynamics simulations to establish the feasibility of creating the necessary electron beam. Electron cooling of RHIC at collisions requires electron beam energy up to about 54 MeV at an average current of between 50 to 100 mA and a particularly bright electron beam. The accelerator chosen to generate this electron beam is a superconducting Energy Recovery Linac (ERL) with a superconducting RF gun with a laser-photocathode. An intensive experimental R&D program engages the various elements of the accelerator: Photocathodes of novel design, superconducting RF electron gun of a particularly high current and low emittance, a very high-current ERL cavity and a demonstration ERL using these components.
CERN, Geneva
BNL, Upton, Long Island, New York
GSI, Darmstadt
KEK, Ibaraki
SLAC, Menlo Park, California
LBNL, Berkeley, California
SLAC, Menlo Park, California
BNL, Upton, Long Island, New York
Fermilab, Batavia, Illinois
LBNL, Berkeley, California
BNL, Upton, Long Island, New York
Fermilab, Batavia, Illinois
Long-range beam-beam interactions can cause significant degrade of beam quality and lifetime in high energy ring colliders. At RHIC, a series of experiments were carried out to study these effects. In this paper, we report on numerical simulation of the long-range beam-beam interactions at RHIC using a parallel strong-strong particle-in-cell code, BeamBeam3D. The simulation includes nonlinearities from both the beam-beam interactions and the arc sextupoles. We observed significant emittance growth for beam separation below 4 σs under nominal tunes. A scan study in tune space shows strong emittance growth around 7th order resonance. Including the tune modulation due to chromaticity and synchrotron motion shows larger emittance growth than the case without the tune modulation.
BNL, Upton, Long Island, New York
To further improve the polarized proton (pp) run collision luminosity in the Relativistic Heavy Ion Collider, correction of the horizontal two-third resonance is desirable to increase the available tune space. The third resonance driving term (RTD) is measured with the turn-by-turn (TBT) beam position monitor (BPM) data with AC dipole excitation. A first order RTD response matrix based on the optics model is used to on-line compensate the third resonance driving term h30000 while keeping other first order RTDs and first order chromaticities unchanged. The results of beam experiment and simulation correction are presented and discussed.
BNL, Upton, Long Island, New York
With 8 arc sextupole families in each RHIC ring, the nonlinear chromaticities can be corrected on-line by matching the off-momentum tunes onto the wanted off-momentum tunes with linear chromaticity only. The Newton method with singular value decomposition (SVD) technique is used for this multi-dimensional nonlinear optimization, where the off-momentum tune response matrix with respect to sextupole strength changes is adopted to simplify and fasten the on-line optimization process. The off-momentum tune response matrix can be calculated with the on-line accelerator optics model or directly measured with the real beam. This correction method will be verified and used in the coming RHIC run'07.
BNL, Upton, Long Island, New York
To further improve the the polarized proton (pp) luminosity in the Relativistic Heavy Ion Collider, the beta functions at the two interaction points (IPs) will be reduced from 1.0 m to 0.9m in 2007. In addition, it is planned to increase the bunch intensity from 1.5*1011 to 2.0*1011. To accommodate these changes, the nonlinear chromaticities and the third resonance driving term should be corrected. In 2007, the number of the arc sextupole power supplies will be doubled from 12 to 24, which allows nonlinear chromaticity correction. With the updated field errors in the interaction regions (IRs), detailed dynamic aperture studies are carried out to optimize the nonlinear correction schemes, and increase the available tune space in collision.