A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Doose, C.

Paper Title Page
TUPMN094 Development of a Model Superconducting Helical Undulator for the ILC Positron Source 1136
 
  • S. H. Kim, C. Doose
    ANL, Argonne, Illinois
  
  Funding: Work supported by the U. S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357.

Model superconducting helical undulators are under development for the proposed International Linear Collider (ILC) positron source. The undulator requires high-permeability steel poles and superconducting coils to meet the ILC parameters. A fabrication method for steel poles on a nonmagnetic beam chamber was developed. A model undulator with a period length of 14 mm and Nb3Sn coils was fabricated. Both ends of the model were designed to provide for continuous winding of a single conductor with 39 turns per helix. A 10-mm-period model was designed and is in the fabrication process. The 14-mm-period model may be used in the development of a cryogenic magnetic measurement system. Details of the fabrication and test results will be presented.