A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Barzi, E.

Paper Title Page
MOPAS023 Nb3Sn Accelerator Magnet Technology R&D at Fermilab 482
 
  • A. V. Zlobin, G. Ambrosio, N. Andreev, E. Barzi, R. Bossert, R. H. Carcagno, G. Chlachidze, J. DiMarco, SF. Feher, V. Kashikhin, V. S. Kashikhin, M. J. Lamm, A. Nobrega, I. Novitski, D. F. Orris, Y. M. Pischalnikov, P. Schlabach, C. Sylvester, M. Tartaglia, J. C. Tompkins, D. Turrioni, G. Velev, R. Yamada
    Fermilab, Batavia, Illinois
 
  Funding: This work was supported by the U. S. Department of Energy

Accelerator magnets based on Nb3Sn superconductor advances magnet operation fields above 10T and increases the coil temperature margin. Development of a new accelerator magnet technology includes the demonstration of main magnet parameters (maximum field, quench performance, field quality, etc.) and their reproducibility using short models, and then the demonstration of technology scale up using long coils. Fermilab is working on the development of Nb3Sn accelerator magnets using shell-type dipole coils and react-and-wind method. As a part of the first phase of technology development Fermilab built and tested six 1-m long dipole models and several dipole mirror configurations. The last three dipoles and two mirrors reached their design fields of 10-11 T. Reproducibility of magnet field quality was demonstrated by all six short models. The technology scale up phase has started by building 2m and 4m dipole coils and testing them in a mirror configuration. This effort complements the Nb3Sn scale up work being performed in the framework of US LHC Accelerator Research Program (LARP). The status and main results of the Nb3Sn accelerator magnet development at Fermilab are reported.

 
MOPAS041 Design of Superferric Magnet for the Cyclotron Gas Stopper Project at the NSCL 524
 
  • S. Chouhan, G. Bollen, C. Guenaut, D. Lawton, F. Marti, D. J. Morrissey, J. Ottarson, G. K. Pang, S. Schwarz, B. Sherrill, A. Zeller
    NSCL, East Lansing, Michigan
  • E. Barzi
    Fermilab, Batavia, Illinois
 
  Funding: Michigan State University, Cyclotron-1, East Lansing, MI-48824

We present the design of a superferric cyclotron gas stopper magnet that has been proposed for use at the NSCL/MSU to stop the radioactive ions produced by fragmentation at high energies (~140 MeV/u). The magnet is a gradient dipole with three sectors ( B~2.7 T at the center and 2 T at the pole-edge. The magnet outer diameter is 3.8 m, with a pole radius of 1.1 m and B*rho=1.7 T-m). The field shape is obtained by extensive profiles in the iron. The coil cross-section is 64 cm*cm and peak field on the conductor is about 1.6 T. The upper and lower coils are in separate cryostat and have warm electrical connections. We present the coil winding and protection schemes. The forces are large and the implication on the support structure is presented.