| Paper | Title | Page |
|---|---|---|
| TPPT079 | Performance Overview of the Production Superconducting RF Cavities for the Spallation Neutron Source Linac | 4048 |
|
||
|
Funding: Work supported by U.S. Department of Energy under contract DE-AC05-84ER40150. As part of its efforts for the SNS construction project, Jefferson Lab has produced 23 cryomodules for the superconducting linac. These modules contained 81 industrially produced multicell Nb accelerating cavities. Each of these cavities was individually tested before assembly into a cryomodule to verify that they achieved the required performance. This ensemble of cavities represents the 3rd largest set of production superconducting cavities fabricated and tested to date. The timely qualification testing of such a collection of cavities offers both challenges and opportunities. Their performance can be characterized by achieved gradient at the required Qo, achieved peak surface field, onset of field emission, and observations of multipacting. Possible correlations between cavity performance and process parameters, only really meaningful in the framework of a large scale production effort, will also be presented. In light of the potential adoption of these cavities for projects such as the Rare Isotope Accelerator or Fermilab Proton Driver, such an analysis is crucial to their success. |
||
| WPAP033 | State-of-the-Art Electron Guns and Injector Designs for Energy Recovery Linacs (ERL) | 2292 |
|
||
|
Funding: This work is supported by NAVSEA, NSWC Crane, the Office of Naval Research, the DOD Joint Technology Office and by the U.S. DOE. A key technology issue of ERL devices for high-power free-electron laser (FEL) and 4th generation light sources is the demonstration of reliable, high-brightness, high-power injector operation. Ongoing programs that target up to 1 Ampere injector performance at emittance values consistent with the requirements of these applications are described. We consider that there are three possible approaches that could deliver the required performance. The first is a DC photocathode gun and superconducting RF (SRF) booster cryomodule. Such a 750 MHz device is being integrated and will be tested up to 100 mA at the Thomas Jefferson National Accelerator Facility beginning in 2007. The second approach is a high-current normal-conducting RF photoinjector. A 700 MHz gun will undergo thermal test in 2006 at the Los Alamos National Laboratory, which, if successful, when equipped with a suitable cathode, would be capable of 1 Ampere operation. The last option is an SRF gun. A half-cell 703 MHz SRF gun capable of delivering 1.0 Ampere will be tested to 0.5 Ampere at the Brookhaven National Laboratory in 2006. The fabrication status, schedule and projected performance for each of these state-of-the-art injector programs will be presented. |
||
| RPPE061 | SRF Accelerator Technology Transfer Experience from the Achievement of the SNS Cryomodule Production Run | 3517 |
|
||
| This paper will discuss the technology transfer aspect of superconducting RF expertise, as it pertains to cryomodule production, beginning with the original design requirements through testing and concluding with product delivery to the end user. The success of future industrialization, of accelerator systems, is dependent upon a focused effort on accelerator technology transfer. Over the past twenty years the Thomas Jefferson National Accelerator Facility (Jefferson Lab) has worked with industry to successfully design, manufacture, test and commission more superconducting RF cryomodules than any other entity in the United States. The most recent accomplishment of Jefferson Lab has been the successful production of twenty-four cryomodules designed for the Spallation Neutron Source (SNS). Jefferson Lab was chosen, by the United States Department of Energy, to provide the superconducting portion of the SNS linac due to its reputation as a primary resource for SRF expertise. The successful partnering with, and development of, industrial resources to support the fabrication of the superconducting RF cryomodules for SNS by Jefferson Lab will be the focus of this paper. | ||
| RPPE064 | Development of a Cryogenic Radiation Detector for Mapping Radio Frequency Superconducting Cavity Field Emissions | 3627 |
|
||
|
Funding: Work supported by: U.S. DOE Contract No. DE-AC05-84er4015. There is a relationship between field emissions in a Super Conducting RF cavity and the production of radiation (mostly X-rays). External (room temperature) detectors are shielded from the onset of low energy X-rays by the vacuum and cryogenic stainless steel module walls. An internal measuring system for mapping field emissions would assist scientists and engineers in perfecting surface deposition and acid washing module surfaces. Two measurement systems are undergoing cryogenic testing at JLab. One is an active CsI photodiode array and the second is an X-ray film camera. The CsI array has operated sucessfully in a cavity in liquid Helium but saturated at higher power due to scattering in the cavity. A shield with an aperature similar to the X-ray film detector is being designed for the next series of tests which will be completed before PAC-05. |
||
| RPPE067 | Design and Fabrication of an FEL Injector Cryomodule | 3724 |
|
||
|
Funding: This work is supported by NAVSEA, MDA, and SMDC. Advanced Energy Systems has recently completed the design of a four cavity cryomodule for use as an FEL injector accelerator on the JLAB Injector Test Stand. Fabrication is nearing completion. Four 748.5 MHz single cell superconducting cavities have been completed and are currently at Jefferson Lab for final processing and test prior to integration in the module. This paper will review the design and fabrication of the cavities and cryomodule. |