Paper | Title | Page |
---|---|---|
MPPE022 | Modification to the Lattice of the Fermilab Debuncher Ring To Improve the Performance of the Stochastic Cooling Systems | 1799 |
|
||
Funding: Supported by the Department of Energy and the National Science Foundation. The Fermilab Debuncher is used to collect antiprotons from the production target, reduce the momentum spread of the beam by an RF bunch rotation, and stochastically cool the transverse and longitudinal emittances of the beam prior to transfer to the Accumulator. A large value of the slip factor of the ring lattice is favored to provide a larger momentum acceptance for the bunch rotation process, while a small value of the slip factor is desirable for stochastic cooling. A dynamic change in the lattice from a large slip factor at injection to a smaller slip factor at extraction would optimize both processes and could lead to an improvement in antiproton stacking rate. This paper discusses the details of lattice modifications to the Debuncher, achievable with the existing hardware, which would result in a 60% increase in the slip factor, while maintaining the tunes and chromaticities fixed, and keeping the betatron functions within an acceptable range. |
||
RPPP020 | Linear Damping Systems for the International Linear Collider | 1689 |
|
||
Funding: Supported by the National Science Foundation The International Linear Collider requires very low transverse emittance beams in order to realize the specified high luminosity. These beams are conventionally produced using radiation damping in specially designed damping rings. A linear damping system, consisting of alternating wigglers and accelerating structures arranged in a straight line, can be considered to replace, or to augment, conventional damping rings. In this paper, the basic features, feasibility, advantages, and disadvantages, of such systems, as applied to the International Linear Collider, will be discussed. |
||
RPPP025 | CESR-c Wiggler Studies in the Context of the International Linear Collider Damping Rings | 1880 |
|
||
Funding: Work supported by the NSF. We present a picture of the International Linear Collider (ILC) damping ring wiggler dynamics using the experience gained from the experimental and simulation-based research studying the wigglers used in the current configuration of the Cornell Electron Storage Ring (CESR). CESR is currently running at 1.8 GeV with 12 superconducting wigglers that have been designed, fabricated, tested, and simulated on-site. We will present results which include frequency map analyses and conventional dynamic aperture studies of CESR-c and the ILC damping rings. We will also provide results from an initial look at physical limitations in the design of the ILC damping ring wigglers. |