NAPAC2016 - List of Authors (Kazakevich, G.M.)

Paper	Title	Page
TUA2CO03	A Novel Technique of Power Control in Magnetron Transmitters for Intense Accelerators	271
	G.M. Kazakevich, R.P. Johnson, M.L. Neubauer Muons, Inc, Illinois, USA V.A. Lebedev, W. Schappert, V.P. Yakovlev Fermilab, Batavia, Illinois, USA
	A novel concept of a high-power magnetron transmitter allowing dynamic phase and power control at the frequency of locking signal is proposed. The transmitter compensating parasitic phase and amplitude modulations inherent in Superconducting RF (SRF) cavities within closed feedback loops is intended for powering of the intensity-frontier superconducting accelerators. The concept uses magnetrons driven by a sufficient resonant (injection-locking) signal and fed by the voltage which can be below the threshold of self-excitation. This provides an extended range of power control in a single magnetron at highest efficiency minimizing the cost of RF power unit and the operation cost. Proof-of-principle of the proposed concept demonstrated in pulsed and CW regimes with 2.45 GHz, 1kW magnetrons is discussed here. A conceptual scheme of the high-power transmitter allowing the dynamic wideband phase and mid-frequency power controls is presented and discussed.
	Slides TUA2CO03 [0.714 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-TUA2CO03
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOA44	Future Prospects of RF Hadron Beam Profile Monitors for Intense Neutrino Beam	373
SUPO24	use link to see paper's listing under its alternate paper code
	Q. Liu Case Western Reserve University, Cleveland, USA M. Backfish, A. Moretti, V. Papadimitriou, A.V. Tollestrup, K. Yonehara, R.M. Zwaska Fermilab, Batavia, Illinois, USA M.A. Cummings, R.P. Johnson, G.M. Kazakevich Muons, Inc, Illinois, USA B.T. Freemire IIT, Chicago, Illinois, USA
	Funding: Work supported by Fermilab Research Alliance, LLC under Contract No. DE-AC02-07CH11359 and DOE STTR Grant, No. DE-SC0013795. A novel beam monitor based on a gas-filled RF resonator is proposed to measure the precise profile of secondary particles downstream of a target in the LBNF beam line at high intensity. The RF monitor is so simple that it promises to be radiation robust in extremely high-radiation environment. When a charged beam passes through a gas-filled microwave RF cavity, it produces electron-ion pairs in the RF cavity. The induced plasma changes the gas permittivity in proportion to the beam intensity. The permittivity shift can be measured by the modulated RF frequency and quality factor. The beam profile can thus be reconstructed from the signals from individual RF cavity pixels built into the beam profile monitor. A demonstration test is underway, and the current results has shown technical feasibility. The next phase consists of two stages, (1) to build and test a new multi-cell 2.45 GHz RF cavity that can be used for the NuMI beamline, and (2) to build and test a new multi-cell 9.3 GHz RF cavity that can be put in service in a future beamline at the LBNF for spatial resolution. These two resonant frequencies are chosen since they are the standard frequencies for magnetron RF source.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-TUPOA44
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRA1CO05	Progress of Gas-Filled Multi-RF-Cavity Beam Profile Monitor for Intense Neutrino Beams	1275
	K. Yonehara, M. Backfish, A. Moretti, A.V. Tollestrup, A.C. Watts, R.M. Zwaska Fermilab, Batavia, Illinois, USA M.A. Cummings, A. Dudas, R.P. Johnson, G.M. Kazakevich, M.L. Neubauer Muons, Inc, Illinois, USA B.T. Freemire IIT, Chicago, Illinois, USA Q. Liu Case Western Reserve University, Cleveland, USA
	Funding: Work supported by Fermilab Research Alliance, LLC under Contract No. DE-AC02-07CH11359 and DOE STTR Grant, No. DE-SC0013795. A novel pressurized gas-filled multi-RF-cavity beam profile monitor has been studied that is simple and robust in high-radiation environments. Charged particles passing through each RF-cavity in the monitor produce intensity-dependent ionized plasma, which changes the gas permittivity. The sensitivity to beam intensity is adjustable using gas pressure and RF gradient. The performance of the gas-filled beam profile monitor has been numerically simulated to evaluate the sensitivity of permittivity measurements. The result indicates that the RF resonator will be useful to measure the beam profile with a charged beam intensity range from 10⁶ to 10¹³ protons/bunch. The range covers the expected beam intensities in NuMI and LBNF. The demonstration of the monitor with intense proton beams are taken place at Fermilab to validate the simulation result. The result will be given in this presentation.
	Slides FRA1CO05 [3.750 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-FRA1CO05
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

A Novel Technique of Power Control in Magnetron Transmitters for Intense Accelerators

271

G.M. Kazakevich, R.P. Johnson, M.L. Neubauer
Muons, Inc, Illinois, USA
V.A. Lebedev, W. Schappert, V.P. Yakovlev
Fermilab, Batavia, Illinois, USA

A novel concept of a high-power magnetron transmitter allowing dynamic phase and power control at the frequency of locking signal is proposed. The transmitter compensating parasitic phase and amplitude modulations inherent in Superconducting RF (SRF) cavities within closed feedback loops is intended for powering of the intensity-frontier superconducting accelerators. The concept uses magnetrons driven by a sufficient resonant (injection-locking) signal and fed by the voltage which can be below the threshold of self-excitation. This provides an extended range of power control in a single magnetron at highest efficiency minimizing the cost of RF power unit and the operation cost. Proof-of-principle of the proposed concept demonstrated in pulsed and CW regimes with 2.45 GHz, 1kW magnetrons is discussed here. A conceptual scheme of the high-power transmitter allowing the dynamic wideband phase and mid-frequency power controls is presented and discussed.

Slides TUA2CO03 [0.714 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-TUA2CO03

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOA44

Future Prospects of RF Hadron Beam Profile Monitors for Intense Neutrino Beam

373

SUPO24

use link to see paper's listing under its alternate paper code

Q. Liu
Case Western Reserve University, Cleveland, USA
M. Backfish, A. Moretti, V. Papadimitriou, A.V. Tollestrup, K. Yonehara, R.M. Zwaska
Fermilab, Batavia, Illinois, USA
M.A. Cummings, R.P. Johnson, G.M. Kazakevich
Muons, Inc, Illinois, USA
B.T. Freemire
IIT, Chicago, Illinois, USA

Funding: Work supported by Fermilab Research Alliance, LLC under Contract No. DE-AC02-07CH11359 and DOE STTR Grant, No. DE-SC0013795.
A novel beam monitor based on a gas-filled RF resonator is proposed to measure the precise profile of secondary particles downstream of a target in the LBNF beam line at high intensity. The RF monitor is so simple that it promises to be radiation robust in extremely high-radiation environment. When a charged beam passes through a gas-filled microwave RF cavity, it produces electron-ion pairs in the RF cavity. The induced plasma changes the gas permittivity in proportion to the beam intensity. The permittivity shift can be measured by the modulated RF frequency and quality factor. The beam profile can thus be reconstructed from the signals from individual RF cavity pixels built into the beam profile monitor. A demonstration test is underway, and the current results has shown technical feasibility. The next phase consists of two stages, (1) to build and test a new multi-cell 2.45 GHz RF cavity that can be used for the NuMI beamline, and (2) to build and test a new multi-cell 9.3 GHz RF cavity that can be put in service in a future beamline at the LBNF for spatial resolution. These two resonant frequencies are chosen since they are the standard frequencies for magnetron RF source.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-TUPOA44

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRA1CO05

Progress of Gas-Filled Multi-RF-Cavity Beam Profile Monitor for Intense Neutrino Beams

1275

K. Yonehara, M. Backfish, A. Moretti, A.V. Tollestrup, A.C. Watts, R.M. Zwaska
Fermilab, Batavia, Illinois, USA
M.A. Cummings, A. Dudas, R.P. Johnson, G.M. Kazakevich, M.L. Neubauer
Muons, Inc, Illinois, USA
B.T. Freemire
IIT, Chicago, Illinois, USA
Q. Liu
Case Western Reserve University, Cleveland, USA

Funding: Work supported by Fermilab Research Alliance, LLC under Contract No. DE-AC02-07CH11359 and DOE STTR Grant, No. DE-SC0013795.
A novel pressurized gas-filled multi-RF-cavity beam profile monitor has been studied that is simple and robust in high-radiation environments. Charged particles passing through each RF-cavity in the monitor produce intensity-dependent ionized plasma, which changes the gas permittivity. The sensitivity to beam intensity is adjustable using gas pressure and RF gradient. The performance of the gas-filled beam profile monitor has been numerically simulated to evaluate the sensitivity of permittivity measurements. The result indicates that the RF resonator will be useful to measure the beam profile with a charged beam intensity range from 10⁶ to 10¹³ protons/bunch. The range covers the expected beam intensities in NuMI and LBNF. The demonstration of the monitor with intense proton beams are taken place at Fermilab to validate the simulation result. The result will be given in this presentation.

Slides FRA1CO05 [3.750 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-FRA1CO05

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)