Paper | Title | Page |
---|---|---|
WEA1CO05 | Microwave Instability Studies in NSLS-II | 655 |
|
||
Funding: This work was supported by Department of Energy contract DE-AC02-98CH10886. The microwave instability in the NSLS-II has been studied for the current configuration of insertion devices, 9 In-Vacuum Undulators (IVU's), 3EPU's, 3 Damping Wigglers. The energy spread as a function of single bunch current has been measured based on the frequency spectrum of IVU for X-Ray Spectroscopy (SRX) beam line. The results for two lattices, bare lattice with nominal energy spread 0.0005 and a lattice with one DW magnet gap closed (nominal energy spread 0.0007) are compared. In addition we used a Spectrum Analyzer to measure the beam spectrum. The instability thresholds for two different lattices cross-checked numerically using the particle tracking code SPACE and longitudinal impedance. |
||
![]() |
Slides WEA1CO05 [2.380 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEA1CO05 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPOB57 | Magnetic Optimization of Long EPUs at NSLS-II | 1018 |
|
||
The Soft Inelastic X-ray scattering (SIX) and the Elec-tron-Spectro-Microscopy (ESM) are two beamlines under construction at National Synchrotron Light Source-II (NSLS-II). The specifics of these two beamlines requested the use of two long Advanced Planar Polarized Light Emitter-II (APPLE-II) undulators, as a source that provides circularly and vertically polarized radiation. Thus we designed 3.5 m and 2.7m long APPLE-II type undulators for SIX and ESM. The NSLS-II ID group is responsible for the magnetic optimization of these two long undulators. In this paper, we first summarize the APPLE-II magnetic and mechanical design. Then, we discuss the magnetic performance of the first APPLE-II achieved with the shimming performed at BNL. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEPOB57 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |